106671-5730 ZEXEL 9 400 616 874 BOSCH INJECTION-PUMP ASSEMBLY 9400616874 1066715730 1671496501

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106671-5730 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 874 9400616874

ZEXEL 106671-5730 1066715730

NISSAN-DIESEL 1671496501 1671496501

Service parts 106671-5730 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-1550

3. GOVERNOR 105489-5770

4. SUPPLY PUMP 105217-1850

5. AUTOM. ADVANCE MECHANIS 105636-2720

6. COUPLING PLATE 105662-1200

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-5600

11. Nozzle and Holder 16600-96520

12. Open Pre:MPa(Kqf/cm2) 22.6{230}

13. NOZZLE-HOLDER 105031-4370

14. NOZZLE

105015-6340

15. NOZZLE SET

Include in #1:

106671-5730 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 874 9400616874

ZEXEL 106671-5730 1066715730

NISSAN-DIESEL 1671496501 1671496501

Zexel num

Bosch num

Firm num

Name

106671-5730

9 400 616 874

1671496501 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
PE6TA K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 132424-0620

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.65 3.6 3.7

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 11.8

Pump speed r/min 650 650 650

Average injection quantity mm3/st. 166.5 164.5 168.5

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Boost pressure kPa 76 76

Boost pressure mmHg 570 570

Hydraulic cylinder OFF *

Injection quantity adjustment_02

Adjusting point C

Rack position 6.7+-0.5

Pump speed r/min 270 270 270

Average injection quantity mm3/st. 15.5 14.5 16.5

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Hydraulic cylinder OFF *

Injection quantity adjustment_03

Adjusting point D

Rack position 9.75

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 110 107 113

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Hydraulic cylinder OFF *

Boost compensator adjustment

Pump speed r/min 400 400 400

Rack position 9.75

Boost pressure kPa 20 18.7 21.3

Boost pressure mmHg 150 140 160

Boost compensator adjustment_02

Pump speed r/min 400 400 400

Rack position 11.8

Boost pressure kPa 46 42 50

Boost pressure mmHg 345 315 375

Boost compensator adjustment_03

Pump speed r/min 400 400 400

Rack position (12.8)

Boost pressure kPa 62.7 62.7 62.7

Boost pressure mmHg 470 470 470

Timer adjustment

Pump speed r/min 875--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 825

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 925

Advance angle deg. 1 0.5 1.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm. (2)Solenoid boost compensator OFF: SBL (3)Rack limit using the stop lever: R1 (4)Boost compensator stroke: BCL (5)Damper spring setting (6)Rack difference between N = N1 and N = N2 (7)Variable speed specification: idling adjustment (8)Fix the lever at the full-load position at delivery. (9)Main spring setting
----------
SBL=(13.1)mm R1=12.8+0.2mm BCL=(3.05)mm N1=1100r/min N2=650r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Pump speed = aa (2)Set the stopper bolt (fixed at full-load position at delivery.)
----------
aa=290r/min
----------
a=(16deg)+-5deg b=(8deg)+-5deg

0000000901

F:Full load I:Idle (1)Stopper bolt setting (2)Use the hole at R = aa
----------
aa=42mm
----------
a=31.5deg+-3deg b=45deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Rack position aa (pump speed bb r/min ) (2)Use the pin above R = cc
----------
aa=12.8+0.2mm bb=350r/min cc=40mm
----------
a=(42deg)+-5deg b=41deg+-5deg

0000001501 BCS

(A) Screw for precise adjustment (B) Pre-adjustment screw (C) Control rack, rack decrease direction (D) Rack limit 1. Solenoid boost compensator adjustment (1)Supply DC: V1 to the solenoid terminals and confirm solenoid operation. (2)With the solenoid ON, calculate L1 from the value of R1. [L1 = La - (10.5 - R1) +-0.2] (3)Adjust (B) to obtain L1. (4)Assemble the solenoid to the governor. (5)With the solenoid ON, readjust (B) so that R1 is within the allowance a. (6)With the solenoid OFF, perform all governor adjustments except rack limit adjustment. (7)Set the pump speed at N1 and turn the solenoid ON. (8)Adjust (A) so that R1 is within the allowance range a. (9)Set the pump speed at N1 and fix the load lever in the full position (10)Turn the solenoid switch ON and OFF several times and confirm that the difference in rack positions is within L2. (11)Set the rack limit. (12)Stamp the solenoid valve.
----------
V1=24V N1=400r/min N2=0r/min R1=9.1mm a=+-0.5mm La=28mm L1=26.6+-0.2mm L2=3.5~5mm
----------