106671-3271 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066713271 220002580a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106671-3271 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106671-3271 1066713271

HINO 220002580A 220002580a

Cross reference number

ZEXEL 106671-3271 1066713271

HINO 220002580A 220002580a

Zexel num

Bosch num

Firm num

Name

106671-3271
106671-3272

220002580A HINO

INJECTION-PUMP ASSEMBLY
EK200 *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-0920

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.3 3.24 3.3

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.75 60.25

Difference between angles 2
Cyl.1-2 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cal 1-3 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-5 deg. 300 299.75 300.25

Injection quantity adjustment

Adjusting point A

Rack position 9.8

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 125.5 122.5 128.5

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 10.3

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 141.2 139.2 143.2

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the lever *

Injection quantity adjustment_03

Adjusting point C

Rack position 10.7

Pump speed r/min 1150 1150 1150

Average injection quantity mm3/st. 149.7 146.7 152.7

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Injection quantity adjustment_04

Adjusting point D

Rack position 6.6+-0.5

Pump speed r/min 225 225 225

Average injection quantity mm3/st. 16 13 19

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Injection quantity adjustment_05

Adjusting point E

Rack position 11+-0.5

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 125 125 145

Fixing the lever *

Timer adjustment

Pump speed r/min 950

Advance angle deg. 0.5

Timer adjustment_02

Pump speed r/min 1000

Advance angle deg. 1.5

Timer adjustment_03

Pump speed r/min 1050

Advance angle deg. 1.9 1.4 2.4

Timer adjustment_04

Pump speed r/min 1150

Advance angle deg. 4.5 4.2 4.8

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)Set the load lever's stop position so that R = aa (N = 0). (3)RACK LIMIT
----------
DL=5.5-0.2mm aa=5.8+0.2mm
----------

Speed control lever angle

F:Full speed
----------

----------
a=22deg+-5deg

0000000901

F:Full load I:Idle S:Stop (1)Rack position aa (pump speed bb r/min )
----------
aa=5.8+0.2mm bb=0r/min
----------
a=13deg+-3deg b=27deg+-3deg c=13deg+-5deg

0000001501 MICRO SWITCH

Switch adjustment Adjust the bolt so that the lower lever position is obtained when the switch is turned ON. (1)Speed N1 (2)Rack position Ra
----------
N1=300+25r/min Ra=6.4mm
----------