106671-3255 ZEXEL 9 400 619 432 BOSCH INJECTION-PUMP ASSEMBLY 9400619432 1066713255 220001495a


106671-3255 INJECTION-PUMP ASSEMBLY
Rating:
76
Buy INJECTION-PUMP ASSEMBLY 106671-3255 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 619 432 9400619432
ZEXEL 106671-3255 1066713255
HINO 220001495A 220001495a

Service parts 106671-3255 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106060-5720
3. GOVERNOR 105488-9803
4. SUPPLY PUMP 105217-1301
5. AUTOM. ADVANCE MECHANIS 105635-0041
6. COUPLING PLATE 105662-0850
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4530
11. Nozzle and Holder 236001026A
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-5300
14. NOZZLE 105015-4120
15. NOZZLE SET

Include in #1:

106671-3255 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 619 432 9400619432
ZEXEL 106671-3255 1066713255
HINO 220001495A 220001495a


Zexel num
Bosch num
Firm num
Name
106671-3255 
9 400 619 432 
220001495A  HINO
INJECTION-PUMP ASSEMBLY
EK100 K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-0920
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.3 3.24 3.3
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.75 60.25
Difference between angles 2
Cyl.1-2
deg.   120 119.75 120.25
Difference between angles 3
Cal 1-6
deg.   180 179.75 180.25
Difference between angles 4
Cal 1-3
deg.   240 239.75 240.25
Difference between angles 5
Cal 1-5
deg.   300 299.75 300.25
Injection quantity adjustment
Adjusting point   A
Rack position   9.9
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   125.5 122.5 128.5
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   10.5
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   141.2 139.2 143.2
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   10.9
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   149.7 146.7 152.7
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   7+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   16 13 19
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_05
Adjusting point   E
Rack position   11.1++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   135 135 155
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   700+-50
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   1.4 0.9 1.9
Timer adjustment_03
Pump speed r/min   1150
Advance angle deg.   4 3.5 4.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106671-3255
N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm. (2)RACK LIMIT (3)Set the load lever at the stop position. (4)Damper spring setting
----------

----------

Speed control lever angle

Test data 106671-3255
F:Full speed
----------

----------
a=15deg+-5deg

0000000901

Test data 106671-3255
F:Full load I:Idle S:Stop (1)At rack = aa, speed = bb (2)Use the hole above R = cc (3)Stopper bolt setting
----------
aa=6.4+0.2mm bb=0r/min cc=75mm
----------
a=10deg+-5deg b=25deg+-3deg c=(14deg)+-3deg

0000001501 MICRO SWITCH

Switch adjustment Adjust the bolt so that the lower lever position is obtained when the switch is turned ON. (1)Speed N1 (2)Rack position Ra
----------
N1=310r/min Ra=7+-0.2mm
----------

Timing setting

Test data 106671-3255
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(0deg)




Have questions with 106671-3255?





Group cross 106671-3255 ZEXEL

Hino 

 
220001491A 
INJECTION-PUMP ASSEMBLY
EK100
 
220001493A 
INJECTION-PUMP ASSEMBLY
EK100
9 400 610 084 
220001494A 
INJECTION-PUMP ASSEMBLY
EK100
 
 
INJECTION-PUMP ASSEMBLY

Hino 

9 400 616 767 
220001494B 
INJECTION-PUMP ASSEMBLY
EK100
106671-3255  
9 400 619 432 
220001495A 
INJECTION-PUMP ASSEMBLY
EK100
Back to top