Fuel injectors
  1. Home
  2. injection
  3. #1047418150

Buy 104741-8150 ZEXEL F 01G 09W 0BF BOSCH INJECTION-PUMP ASSEMBLY f01g09w0bf 1047418150 32a6500430


104741-8150 INJECTION-PUMP ASSEMBLY
Rating:
15
Buy INJECTION-PUMP ASSEMBLY 104741-8150 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 09W 0BF f01g09w0bf
ZEXEL 104741-8150 1047418150
MITSUBISHI-HEAV 32A6500430 32a6500430

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
Diesel VE Fuel Injection Pump 104641-8150 104741-8150 NP-VE4/11F1100RNP2640 32A65-00430 Compatible With MITSUBISHI S4S
$1,071.25

15 Oct 2024
0.1102[0.05] pounds
CN: LanSheng68
Diesel VE Fuel Injection Pump 104641-8150 104741-8150 NP-VE4/11F1100RNP2640 32A65-00430 Compatible With MITSUBISHI S4S
GJGSDAVBL Optimize design and noise reduction technology to improve driving comfort. || Provide a variety of output and speed options to meet the needs of different models. || After strict testing, it ensures stable operation under various working conditions and reduces failures. || Automatically adjust the oil supply, adapt to the load change of diesel engine, and ensure stable operation. || Reasonable structural design, convenient disassembly and replacement of parts, and reduced maintenance cost.
Diesel Fuel Injection Pump 104741-8150 32A65-00430 NP-VE4/11F1100RNP2640 Compatible With MITSUBISHI S4S
$1,378.02
 

05 Feb 2024
0.1102[0.05] Pounds
CN: DiManGongSi STORE
Diesel Fuel Injection Pump 104741-8150 32A65-00430 NP-VE4/11F1100RNP2640 Compatible With MITSUBISHI S4S
TUMALO The drive gear is the power source of the fuel injection pump, usually driven by the crankshaft. || The pressure regulator is used to adjust the pressure of the fuel injection pump output to adapt to different engine loads and working conditions. || The control valve is one of the key components in the fuel injection pump, which determines the timing and amount of fuel injection according to the control signal. || The fuel injection pump should be regularly pressure tested and debugged to ensure that its output meets the specifications. || Accurate fuel injection control can improve engine combustion efficiency and power output.
Diesel Fuel Injection Pump 104741-8150 32A65-00430 NP-VE4/11F1100RNP2640，Compatible For MITSUBISHI S4S
$1,231.11
 

27 Nov 2023
0.1102[0.05] pounds
CN: meiyuanlei
Diesel Fuel Injection Pump 104741-8150 32A65-00430 NP-VE4/11F1100RNP2640，Compatible For MITSUBISHI S4S
AKkis ☆ Diesel Fuel Injection Pump 104741-8150 32A65-00430 NP-VE4/11F1100RNP2640，Compatible For MITSUBISHI S4S || ☆ Quiet: The fuel pump is carefully designed and optimized, with low noise level, reducing noise interference during vehicle driving and improving driving experience and comfort. || ☆ High efficiency: The fuel pump can deliver fuel to the engine in a very short time to ensure the smooth operation and efficient combustion of the engine, thereby improving fuel utilization and vehicle performance. || ☆ Stability: Using advanced technology and design, it ensures stable fuel supply under various working conditions and prevents insufficient or excessive fuel reserve, thereby improving the driving safety and reliability of the car. || ☆ Energy saving and environmental protection: The fuel pump can intelligently adjust the amount of fuel supply according to the needs of the engine, avoid energy waste and excessive exhaust emissions, reduce environmental pollution, and improve fuel economy.

Components :

0. INJECTION-PUMP ASSEMBLY 104741-8150
1. _
2. FUEL INJECTION PUMP
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY
8. Nozzle and Holder
9. Open Pre:MPa(Kqf/cm2)
10. NOZZLE-HOLDER
11. NOZZLE

Scheme ###:

PACKING RING
1/6. [1] 146601-0900 PACKING RING
6. [1] 146100-0420 SUPPLY PUMP
9. [1] 146103-0100 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0020 DRIVE SHAFT
12/1. [1] 146200-0000 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-2320 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-4820 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146311-9020 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
34. [1] 146312-5000 COMPRESSION SPRING
34B. [1] 146312-5100 COMPRESSION SPRING
34C. [1] 146312-4400 COMPRESSION SPRING
35/1. [1] 146690-3200 SHIM D11.5&9.4T0.1
35/1. [1] 146690-3300 SHIM D11.5&9.4T0.2
35/1. [1] 146690-3400 SHIM D11.5&9.4T0.25
35/1. [1] 146690-3500 SHIM D11.5&9.4T1.0
35/1. [1] 146690-4100 SHIM D11.5&9.4T2
35/1. [1] 146690-4200 SHIM D11.5&9.4T0.5
35/1. [1] 146690-4300 SHIM D11.5&9.4T0.75
36. [1] 146600-0800 O-RING
37. [1] 146310-4020 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
41. [1] 146312-1900 COMPRESSION SPRING
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM D17&5.2T2.1
48/1. [1] 146690-5900 SHIM D17&5.2T2.2
48/1. [1] 146690-6000 SHIM D17&5.2T2.3
48/1. [1] 146690-6100 SHIM D17&5.2T2.4
48/1. [1] 146690-6200 SHIM D17&5.2T2.5
48/1. [1] 146690-6300 SHIM D17&5.2T2.6
48/1. [1] 146690-6400 SHIM D17&5.2T2.7
48/1. [1] 146690-6500 SHIM D17&5.2T2.8
48/1. [1] 146690-6600 SHIM D17&5.2T2.9
48/1. [1] 146690-6700 SHIM D17&5.2T3.0
48/1. [1] 146690-6800 SHIM D17&5.2T3.1
48/1. [1] 146690-6900 SHIM D17&5.2T3.2
48/1. [1] 146690-7000 SHIM D17&5.2T3.3
48/1. [1] 146690-7100 SHIM D17&5.2T3.4
48/1. [1] 146690-7200 SHIM D17&5.2T0.4
48/1. [1] 146690-7300 SHIM D17&5.2T0.6
48/1. [1] 146690-7400 SHIM D17&5.2T0.7
48/1. [1] 146690-7500 SHIM D17&5.2T1.9
48/1. [1] 146690-7800 SHIM D17&5.2T0.2
49. [2] 146234-0600 GUIDE PIN
50. [1] 146401-4220 HYDRAULIC HEAD
50. [1] 146401-4220 HYDRAULIC HEAD
50. [1] 146401-4220 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET
55. [4] 146430-2020 DELIVERY-VALVE ASSEMBLY VE20
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-0220 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
67. [1] 146822-0120 GOVERNOR COVER
67/1. [1] 146508-1022 GOVERNOR COVER
67/2. [1] 146515-2520 CONTROL SHAFT
67/3. [1] 146600-0100 O-RING
67/4. [2] 139310-0200 PLAIN WASHER
67/4. [2] 139310-0200 PLAIN WASHER
67/5. [1] 146832-5500 CONTROL LEVER MARK:255
67/5B. [1] 146832-5600 CONTROL LEVER MARK:256
67/5C. [1] 146832-9300 CONTROL LEVER MARK:293
67/5D. [1] 146832-9400 CONTROL LEVER MARK:294
67/6. [2] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
67/6. [2] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
67/7. [1] 013020-6040 UNION NUT
67/8. [1] 146515-1820 LEVER SHAFT
67/9. [1] 146587-4500 COILED SPRING
67/10. [1] 146600-0200 O-RING
67/11. [1] 146602-0100 PLAIN WASHER
67/12. [1] 146540-1300 CONTROL LEVER
67/12B. [1] 146540-1400 CONTROL LEVER MARK:0
67/12C. [1] 146540-5200 CONTROL LEVER
67/12D. [1] 146540-5300 CONTROL LEVER
67/13. [1] 146621-1700 UNION NUT
67/14. [1] 146621-1700 UNION NUT
67/15. [1] 146526-2800 BLEEDER SCREW
67/16. [1] 146526-3400 BLEEDER SCREW
67/18. [1] 146587-0400 COILED SPRING
67/19. [1] 146541-0000 ANGLE PIECE
67/23. [1] 146925-2520 BRACKET
67/24. [2] 139006-4500 BLEEDER SCREW
67/25. [1] 013020-6040 UNION NUT
67/78. [1] 146600-4400 SEAL RING
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3400 THREADED PIN L53.00
67/201B. [1] 146545-3500 THREADED PIN L55.00
67/201C. [1] 146545-3600 THREADED PIN L57.00
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
95. [1] 146871-7220 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1.0
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0420 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-2600 PLAIN WASHER
115. [1] 146976-1200 SLIDING SLEEVE
116. [1] 146576-0200 CAP
117/1. [1] 146577-1800 PLUG L2.10
117/1. [1] 146577-1900 PLUG L2.30
117/1. [1] 146577-2000 PLUG L2.50
117/1. [1] 146577-2100 PLUG L2.70
117/1. [1] 146577-2200 PLUG L2.90
117/1. [1] 146577-2300 PLUG L3.10
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-3200 PLUG L4.90
117/1. [1] 146577-3300 PLUG L5.10
117/1. [1] 146577-6700 PLUG L2.2
117/1. [1] 146577-6800 PLUG L2.4
117/1. [1] 146577-6900 PLUG L2.6
117/1. [1] 146577-7000 PLUG L2.8
117/1. [1] 146577-7100 PLUG L3.0
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
117/1. [1] 146577-8000 PLUG L4.8
117/1. [1] 146577-8100 PLUG L5.0
117/1. [1] 146877-0000 PLUG L5.2
117/1. [1] 146877-0100 PLUG L5.3
117/1. [1] 146877-0200 PLUG L5.4
117/1. [1] 146877-0300 PLUG L5.5
117/1. [1] 146877-4700 PLUG L5.6
117/1. [1] 146877-4800 PLUG L5.7
117/1. [1] 146877-4900 PLUG L5.8
117/1. [1] 146877-5000 PLUG L5.9
120. [1] 146879-4520 RETAINING PIN
122. [1] 146580-3700 GOVERNOR SPRING
123. [4] 139106-0200 FLAT-HEAD SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1.0
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0220 CONTROL VALVE STAMP 02
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146120-0120 OVER FLOW VALVE
137. [2] 139512-0500 GASKET
200. [1] 146206-0100 COILED SPRING
235. [1] 146935-8601 BRACKET
236. [2] 010206-2240 HEX-SOCKET-HEAD CAP SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146650-1220 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
242. [1] 146662-1420 WIRE
243. [1] 146621-4901 UNION NUT
245. [1] 139512-0500 GASKET
247. [1] 146669-1720 INLET UNION
251. [1] 146125-0101 FILTER
252. [1] 146125-0200 COILED SPRING
800S. [1] 146020-1820 PUMP HOUSING
800S/1/6. [1] 146601-0900 PACKING RING
804S. [1] 146232-0720 COMPRESSION SPRING
805S. [1] 146574-0320 PARTS SET
810S. [1] 146600-1120 REPAIR SET
821S. [1] 146210-5720 ROLLER SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
906. [1] 146940-2100 NAMEPLATE
907. [1] 025803-1640 WOODRUFF KEY
908. [1] 013021-2140 UNION NUT
909. [1] 014111-2440 LOCKING WASHER

Include in #2:

104741-8150 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 01G 09W 0BF f01g09w0bf
ZEXEL 104741-8150 1047418150
MITSUBISHI-HEAV 32A6500430 32a6500430


Zexel num
Bosch num
Firm num
Name
104741-8150 
F 01G 09W 0BF 
32A6500430  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S4S

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   43 42.5 43.5
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   36.5 31 42
Oil temperature degC   48 46 50
Injection timing adjustment_03
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   42.8 38.8 46.8
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   43 42 44
Difference in delivery mm3/st.   4
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_05
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   42.6 42.6 42.6
Oil temperature degC   50 48 52
Injection quantity adjustment
Pump speed r/min   1190 1190 1190
Average injection quantity mm3/st.   14.6 12.6 16.6
Difference in delivery mm3/st.   4
Basic   *
Oil temperature degC   50 48 52
Injection quantity adjustment_02
Pump speed r/min   1350 1350 1350
Average injection quantity mm3/st.   3
Oil temperature degC   50 48 52
Injection quantity adjustment_03
Pump speed r/min   1190 1190 1190
Average injection quantity mm3/st.   14.6 11.1 18.1
Difference in delivery mm3/st.   4.5
Basic   *
Oil temperature degC   50 48 52
Governor adjustment
Pump speed r/min   363 363 363
Average injection quantity mm3/st.   11.5 9.5 13.5
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   35 35
Oil temperature degC   48 46 50
Governor adjustment_03
Pump speed r/min   363 363 363
Average injection quantity mm3/st.   11.5 9 14
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   52.6 47.6 57.6
Basic   *
Oil temperature degC   48 46 50
Remarks
Full  
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   52.6 47.6 57.6
Oil temperature degC   48 46 50
Remarks
Full  
Speed control lever angle
Pump speed r/min   363 363 363
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position  
0000000901
Pump speed r/min   800 800 800
Overflow quantity cm3/min   420 290 550
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   800 800 800
Pressure kPa   545 516 574
Pressure kgf/cm2   5.6 5.3 5.9
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_02
Pump speed r/min   600 600 600
Pressure kPa   496 447 545
Pressure kgf/cm2   5.1 4.6 5.6
Oil temperature degC   50 48 52
Stop lever angle_03
Pump speed r/min   800 800 800
Pressure kPa   545 506 584
Pressure kgf/cm2   5.6 5.2 6
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_04
Pump speed r/min   900 900 900
Pressure kPa   569 520 618
Pressure kgf/cm2   5.8 5.3 6.3
Oil temperature degC   50 48 52
Stop lever angle_05
Pump speed r/min   1100 1100 1100
Pressure kPa   608 559 657
Pressure kgf/cm2   6.2 5.7 6.7
Oil temperature degC   50 48 52
0000001101
Pump speed r/min   800 800 800
Timer stroke mm   1.8 1.6 2
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   600 600 600
Timer stroke mm   0.9 0.3 1.5
Oil temperature degC   50 48 52
_03
Pump speed r/min   800 800 800
Timer stroke mm   1.8 1.4 2.2
Basic   *
Oil temperature degC   50 48 52
_04
Pump speed r/min   1100 1100 1100
Timer stroke mm   2.5 2 2.9
Oil temperature degC   50 48 52
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001401
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   35.1 34.6 35.6
Timer stroke TA mm   1.5 1.3 1.7
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   36 36 36
Timer stroke TA mm   2.5 2 2.9
Timer stroke variation dT mm   0 0 0
Oil temperature degC   50 48 52
_03
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   33.5 32.5 34.5
Timer stroke TA mm   1.5 0.5 2.5
Timer stroke variation dT mm   1 1 1
Oil temperature degC   50 48 52
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   5.8 5.7 5.9
MS dimension mm   2.5 2.4 2.6
Pre-stroke mm   0.1 0.08 0.12
Control lever angle alpha deg.   25 21 29
Control lever angle beta deg.   24 19 29

Test data Ex:

0000001801 STARTING I/Q ADJUSTMENT

Test data 104741-8150
Starting Q decrease lever adjustment Adjust using the screw (A) so that the standards are satisfied, then fix using the nut (B). Screw (A) protrusion: L (B) Nut (SW10, T1 after completing adjustment) (C) Cap (D) Stop lever
----------
L=7.4~11.1mm T1=6~9N-m(0.6~0.9kgf-m)
----------
L=7.4~11.1mm




Have questions with 104741-8150?





Group cross 104741-8150 ZEXEL

Mitsubishi-Heav 

104741-8100  
 
32C6500290 
INJECTION-PUMP ASSEMBLY
S4Q2-T
104741-8110  

104741-8111 
9 460 615 091 
2C6500320 
INJECTION-PUMP ASSEMBLY
S4Q2
104741-8110  

104741-8111 
9 460 615 091 
32C6500320 
INJECTION-PUMP ASSEMBLY
S4Q2
104741-8111  
 
2C6500321 
INJECTION-PUMP ASSEMBLY
S4Q2
104741-8111  

104741-8112 
F 01G 09W 0EB 
32C6500321 
INJECTION-PUMP ASSEMBLY
S4Q2
104741-8112  
F 01G 09W 0FA 
32C6510320 
INJECTION-PUMP ASSEMBLY
S4Q2

Mitsubishi 

104741-8120  

104741-8121 
F 01G 09W 0AZ 
ME444303 
INJECTION-PUMP ASSEMBLY
4M40 TL
104741-8121  

104741-8122 
 
ME444303 
INJECTION-PUMP ASSEMBLY
4M40 TL
104741-8122  
F 01G 09W 0FZ 
ME444303 
INJECTION-PUMP ASSEMBLY
4M40 TL
104741-8122  
F 01G 09W 0FZ 
ME994998 
INJECTION-PUMP ASSEMBLY
4M40 TL

Mitsubishi-Heav 

104741-8130  

104741-8131 
F 01G 09W 0FJ 
32A6500410 
INJECTION-PUMP ASSEMBLY
S4S
104741-8131  

104741-8132 
F 01G 09W 0FX 
32A6510410 
INJECTION-PUMP ASSEMBLY
S4S
104741-8132  
F 01G 09W 0FB 
32A6520410 
INJECTION-PUMP ASSEMBLY
S4S
104741-8140  

104741-8141 
F 01G 09W 0BE 
32A6500420 
INJECTION-PUMP ASSEMBLY
S4S
104741-8141  
F 01G 09W 0G9 
32A6510420 
INJECTION-PUMP ASSEMBLY
S4S
104741-8150  
F 01G 09W 0BF 
32A6500430 
INJECTION-PUMP ASSEMBLY
S4S
104741-8160  

104741-8161 
F 01G 09W 0BG 
32A6500440 
INJECTION-PUMP ASSEMBLY
S4S
104741-8161  
F 01G 09W 0GE 
32A6510440 
INJECTION-PUMP ASSEMBLY
S4S
104741-8170  

104741-8171 
F 01G 09W 0C1 
32A6500450 
INJECTION-PUMP ASSEMBLY
S4S
104741-8171  
F 01G 09W 0GF 
32A6510450 
INJECTION-PUMP ASSEMBLY
S4S
104741-8180  
F 01G 09W 0FK 
32C6500340 
INJECTION-PUMP ASSEMBLY
S4Q2
104741-8190  
F 01G 09W 0EL 
32A6500460 
INJECTION-PUMP ASSEMBLY
S4S
Back to top