Rating:
Information injection-pump assembly
BOSCH
9 460 610 992
9460610992
ZEXEL
104741-3360
1047413360
Components :
0. | INJECTION-PUMP ASSEMBLY | 104741-3360 |
1. | _ | |
2. | FUEL INJECTION PUMP | |
3. | NUMBER PLATE | 146959-6600 |
4. | _ | |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | |
7. | NOZZLE AND HOLDER ASSY | 105148-1401 |
8. | Nozzle and Holder | ME201844 |
9. | Open Pre:MPa(Kqf/cm2) | 14.7{150} |
10. | NOZZLE-HOLDER | 105078-0181 |
11. | NOZZLE | 105007-1350 |
Scheme ###:
1/6. | [1] | 146601-0700 | PACKING RING |
6. | [1] | 146100-0220 | SUPPLY PUMP |
9. | [1] | 146103-0100 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12. | [1] | 146200-0320 | DRIVE SHAFT |
12/1. | [1] | 146200-0300 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0100 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-3520 | ROLLER SET |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0000 | SLOTTED WASHER |
29. | [1] | 146220-4820 | CAM PLATE |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146311-6520 | PUMP PLUNGER |
32. | [1] | 146301-0000 | SLIDING PIECE |
34. | [1] | 146312-4700 | COMPRESSION SPRING |
34B. | [1] | 146312-5500 | COMPRESSION SPRING |
34C. | [1] | 146312-4900 | COMPRESSION SPRING |
35/1. | [1] | 146690-3200 | SHIM D11.5&9.4T0.1 |
35/1. | [1] | 146690-3300 | SHIM D11.5&9.4T0.2 |
35/1. | [1] | 146690-3400 | SHIM D11.5&9.4T0.25 |
35/1. | [1] | 146690-3500 | SHIM D11.5&9.4T1.0 |
35/1. | [1] | 146690-4100 | SHIM D11.5&9.4T2 |
35/1. | [1] | 146690-4200 | SHIM D11.5&9.4T0.5 |
35/1. | [1] | 146690-4300 | SHIM D11.5&9.4T0.75 |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-4020 | COVER |
38. | [2] | 146620-5000 | BLEEDER SCREW |
39. | [1] | 146310-5100 | COVER |
40. | [2] | 146620-5000 | BLEEDER SCREW |
41. | [1] | 146312-5300 | COMPRESSION SPRING |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0001 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM D17.0&5.2T0.50 |
48/1. | [1] | 146603-0100 | SHIM D17.0&5.2T0.80 |
48/1. | [1] | 146603-0200 | SHIM D17.0&5.2T1.00 |
48/1. | [1] | 146603-0300 | SHIM D17.0&5.2T1.20 |
48/1. | [1] | 146603-0400 | SHIM D17.0&5.2T1.50 |
48/1. | [1] | 146603-0500 | SHIM D17.0&5.2T1.80 |
48/1. | [1] | 146603-0600 | SHIM D17.0&5.2T2.00 |
48/1. | [1] | 146690-1400 | SHIM D17&5.2T0.9 |
48/1. | [1] | 146690-1500 | SHIM D17&5.2T1.1 |
48/1. | [1] | 146690-1600 | SHIM D17&5.2T1.3 |
48/1. | [1] | 146690-1700 | SHIM D17&5.2T1.4 |
48/1. | [1] | 146690-1800 | SHIM D17&5.2T1.6 |
48/1. | [1] | 146690-1900 | SHIM D17&5.2T1.7 |
48/1. | [1] | 146690-5800 | SHIM |
48/1. | [1] | 146690-5900 | SHIM |
48/1. | [1] | 146690-6000 | SHIM |
48/1. | [1] | 146690-6100 | SHIM |
48/1. | [1] | 146690-6200 | SHIM |
48/1. | [1] | 146690-6300 | SHIM |
48/1. | [1] | 146690-6400 | SHIM |
48/1. | [1] | 146690-6500 | SHIM |
48/1. | [1] | 146690-6600 | SHIM |
48/1. | [1] | 146690-6700 | SHIM |
48/1. | [1] | 146690-6800 | SHIM |
48/1. | [1] | 146690-6900 | SHIM |
48/1. | [1] | 146690-7000 | SHIM |
48/1. | [1] | 146690-7100 | SHIM |
48/1. | [1] | 146690-7200 | SHIM |
48/1. | [1] | 146690-7300 | SHIM |
48/1. | [1] | 146690-7400 | SHIM |
48/1. | [1] | 146690-7500 | SHIM |
48/1. | [1] | 146690-7800 | SHIM |
49. | [2] | 146234-0600 | GUIDE PIN |
50. | [1] | 146403-7420 | HYDRAULIC HEAD |
50. | [1] | 146403-7420 | HYDRAULIC HEAD |
50. | [1] | 146403-7420 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM D9.5&3.0T1.90 |
52/1. | [1] | 146420-0100 | SHIM D9.5&3.0T1.92 |
52/1. | [1] | 146420-0200 | SHIM D9.5&3.0T1.94 |
52/1. | [1] | 146420-0300 | SHIM D9.5&3.0T1.96 |
52/1. | [1] | 146420-0400 | SHIM D9.5&3.0T1.98 |
52/1. | [1] | 146420-0500 | SHIM D9.5&3.0T2.00 |
52/1. | [1] | 146420-0600 | SHIM D9.5&3.0T2.02 |
52/1. | [1] | 146420-0700 | SHIM D9.5&3.0T2.04 |
52/1. | [1] | 146420-0800 | SHIM D9.5&3.0T2.06 |
52/1. | [1] | 146420-0900 | SHIM D9.5&3.0T2.08 |
52/1. | [1] | 146420-1000 | SHIM D9.5&3.0T2.10 |
52/1. | [1] | 146420-1100 | SHIM D9.5&3.0T2.12 |
52/1. | [1] | 146420-1200 | SHIM D9.5&3.0T2.14 |
52/1. | [1] | 146420-1300 | SHIM D9.5&3.0T2.16 |
52/1. | [1] | 146420-1400 | SHIM D9.5&3.0T2.18 |
52/1. | [1] | 146420-1500 | SHIM D9.5&3.0T2.20 |
52/1. | [1] | 146420-1600 | SHIM D9.5&3.0T2.22 |
52/1. | [1] | 146420-1700 | SHIM D9.5&3.0T2.24 |
52/1. | [1] | 146420-1800 | SHIM D9.5&3.0T2.26 |
52/1. | [1] | 146420-1900 | SHIM D9.5&3.0T2.28 |
52/1. | [1] | 146420-2000 | SHIM D9.5&3.0T2.30 |
52/1. | [1] | 146420-2100 | SHIM D9.5&3.0T2.32 |
52/1. | [1] | 146420-2200 | SHIM D9.5&3.0T2.34 |
52/1. | [1] | 146420-2300 | SHIM D9.5&3.0T2.36 |
52/1. | [1] | 146420-2400 | SHIM D9.5&3.0T2.38 |
52/1. | [1] | 146420-2500 | SHIM D9.5&3.0T2.40 |
52/1. | [1] | 146420-2600 | SHIM D9.5&3.0T2.42 |
52/1. | [1] | 146420-2700 | SHIM D9.5&3.0T2.44 |
52/1. | [1] | 146420-2800 | SHIM D9.5&3.0T2.46 |
52/1. | [1] | 146420-2900 | SHIM D9.5&3.0T2.48 |
52/1. | [1] | 146420-3000 | SHIM D9.5&3.0T2.50 |
52/1. | [1] | 146420-3100 | SHIM D9.5&3.0T2.52 |
52/1. | [1] | 146420-3200 | SHIM D9.5&3.0T2.54 |
52/1. | [1] | 146420-3300 | SHIM D9.5&3.0T2.56 |
52/1. | [1] | 146420-3400 | SHIM D9.5&3.0T2.58 |
52/1. | [1] | 146420-3500 | SHIM D9.5&3.0T2.60 |
52/1. | [1] | 146420-3600 | SHIM D9.5&3.0T2.62 |
52/1. | [1] | 146420-3700 | SHIM D9.5&3.0T2.64 |
52/1. | [1] | 146420-3800 | SHIM D9.5&3.0T2.66 |
52/1. | [1] | 146420-3900 | SHIM D9.5&3.0T2.68 |
52/1. | [1] | 146420-4000 | SHIM D9.5&3.0T2.70 |
52/1. | [1] | 146420-4100 | SHIM D9.5&3.0T2.72 |
52/1. | [1] | 146420-4200 | SHIM D9.5&3.0T2.74 |
52/1. | [1] | 146420-4300 | SHIM D9.5&3.0T2.76 |
52/1. | [1] | 146420-4400 | SHIM D9.5&3.0T2.78 |
52/1. | [1] | 146420-4500 | SHIM D9.5&3.0T2.80 |
52/1. | [1] | 146420-4600 | SHIM D9.5&3.0T2.82 |
52/1. | [1] | 146420-4700 | SHIM D9.5&3.0T2.84 |
52/1. | [1] | 146420-4800 | SHIM D9.5&3.0T2.86 |
52/1. | [1] | 146420-4900 | SHIM D9.5&3.0T2.88 |
52/1. | [1] | 146420-5000 | SHIM D9.5&3.0T2.90 |
52/1. | [1] | 146420-5100 | SHIM D9.5&3.0T1.74 |
52/1. | [1] | 146420-5200 | SHIM D9.5&3.0T1.76 |
52/1. | [1] | 146420-5300 | SHIM D9.5&3.0T1.78 |
52/1. | [1] | 146420-5400 | SHIM D9.5&3.0T1.80 |
52/1. | [1] | 146420-5500 | SHIM D9.5&3.0T1.82 |
52/1. | [1] | 146420-5600 | SHIM D9.5&3.0T1.84 |
52/1. | [1] | 146420-5700 | SHIM D9.5&3.0T1.86 |
52/1. | [1] | 146420-5800 | SHIM D9.5&3.0T1.88 |
54. | [4] | 146433-0100 | GASKET D12&6.4T1.00 |
55. | [4] | 146430-2920 | DELIVERY-VALVE ASSEMBLY |
56. | [4] | 146432-0000 | COMPRESSION SPRING |
58. | [4] | 146440-0720 | FITTING |
60. | [3] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146703-6120 | COMPENSATOR,MANIFOLD-PRES |
67/1. | [1] | 146805-8220 | GOVERNOR COVER |
67/14. | [1] | 146621-1700 | UNION NUT |
67/16. | [1] | 146526-3000 | BLEEDER SCREW |
67/23. | [1] | 146925-7520 | BRACKET |
67/24. | [2] | 010206-2240 | HEX-SOCKET-HEAD CAP SCREW |
67/31. | [1] | 146710-0700 | BUSHING |
67/32. | [1] | 146711-0000 | PLATE |
67/33. | [1] | 139218-0400 | UNION NUT |
67/34. | [1] | 146712-0700 | BEARING PIN |
67/35. | [1] | 146621-0300 | UNION NUT |
67/36. | [1] | 146600-1400 | O-RING |
67/37. | [1] | 146710-0100 | BUSHING |
67/38. | [1] | 139506-0200 | GASKET D8.9&6.8T1.00 |
67/39. | [1] | 146620-0300 | CAPSULE |
67/40. | [1] | 026512-1540 | GASKET D15.4&12.2T1.50 |
67/41. | [1] | 146713-4300 | ADJUSTING PIN |
67/42. | [2] | 146714-0200 | PLATE |
67/43. | [1] | 146715-0300 | DIAPHRAGM |
67/44. | [1] | 139306-0100 | LOCKING WASHER |
67/45. | [1] | 013030-6040 | UNION NUT M6P1H3.6 |
67/46. | [1] | 146716-0000 | UNION NUT |
67/47. | [1] | 146717-3900 | COILED SPRING |
67/48/1. | [1] | 146720-3000 | SPACER BUSHING L3.7 |
67/48/1. | [1] | 146720-3100 | SPACER BUSHING L3.9 |
67/48/1. | [1] | 146720-3200 | SPACER BUSHING L4.1 |
67/48/1. | [1] | 146720-3300 | SPACER BUSHING L4.3 |
67/48/1. | [1] | 146720-3400 | SPACER BUSHING L4.5 |
67/48/1. | [1] | 146720-3500 | SPACER BUSHING L4.7 |
67/48/1. | [1] | 146720-3600 | SPACER BUSHING L4.9 |
67/48/1. | [1] | 146720-3700 | SPACER BUSHING L5.1 |
67/48/1. | [1] | 146720-3800 | SPACER BUSHING L5.3 |
67/48/1. | [1] | 146720-3900 | SPACER BUSHING L5.5 |
67/48/1. | [1] | 146720-4000 | SPACER BUSHING L5.7 |
67/48/1. | [1] | 146720-4100 | SPACER BUSHING L5.9 |
67/48/1. | [1] | 146720-4200 | SPACER BUSHING L6.1 |
67/48/1. | [1] | 146720-4300 | SPACER BUSHING L6.3 |
67/48/1. | [1] | 146720-4400 | SPACER BUSHING L6.5 |
67/48/1. | [1] | 146720-8900 | SPACER BUSHING L6.7 |
67/48/1. | [1] | 146720-9000 | SPACER BUSHING L6.9 |
67/48/1. | [1] | 146720-9100 | SPACER BUSHING L7.1 |
67/48/1. | [1] | 146720-9200 | SPACER BUSHING L7.3 |
67/48/1. | [1] | 146720-9300 | SPACER BUSHING L7.5 |
67/48/1. | [1] | 146720-9400 | SPACER BUSHING L7.7 |
67/48/1. | [1] | 146720-9500 | SPACER BUSHING L7.9 |
67/48/1. | [1] | 146720-9600 | SPACER BUSHING L8.1 |
67/48/1. | [1] | 146720-9700 | SPACER BUSHING L8.3 |
67/48/1. | [1] | 146720-9800 | SPACER BUSHING L8.5 |
67/48/1. | [1] | 146720-9900 | SPACER BUSHING L3.6 |
67/48/1. | [1] | 146725-0000 | SPACER BUSHING L3.8 |
67/48/1. | [1] | 146725-0100 | SPACER BUSHING L4.0 |
67/48/1. | [1] | 146725-0200 | SPACER BUSHING L4.2 |
67/48/1. | [1] | 146725-0300 | SPACER BUSHING L4.4 |
67/48/1. | [1] | 146725-0400 | SPACER BUSHING L4.6 |
67/48/1. | [1] | 146725-0500 | SPACER BUSHING L4.8 |
67/48/1. | [1] | 146725-0600 | SPACER BUSHING L5.0 |
67/48/1. | [1] | 146725-0700 | SPACER BUSHING L5.2 |
67/48/1. | [1] | 146725-0800 | SPACER BUSHING L5.4 |
67/48/1. | [1] | 146725-0900 | SPACER BUSHING L5.6 |
67/48/1. | [1] | 146725-1000 | SPACER BUSHING L5.8 |
67/48/1. | [1] | 146725-1100 | SPACER BUSHING L6.0 |
67/48/1. | [1] | 146725-1200 | SPACER BUSHING L6.2 |
67/48/1. | [1] | 146725-1300 | SPACER BUSHING L6.4 |
67/48/1. | [1] | 146725-1400 | SPACER BUSHING L6.6 |
67/48/1. | [1] | 146725-1500 | SPACER BUSHING L6.8 |
67/48/1. | [1] | 146725-1600 | SPACER BUSHING L7.0 |
67/48/1. | [1] | 146725-1700 | SPACER BUSHING L7.2 |
67/48/1. | [1] | 146725-1800 | SPACER BUSHING L7.4 |
67/48/1. | [1] | 146725-1900 | SPACER BUSHING L7.6 |
67/48/1. | [1] | 146725-2000 | SPACER BUSHING L7.8 |
67/48/1. | [1] | 146725-2100 | SPACER BUSHING L8.0 |
67/48/1. | [1] | 146725-2200 | SPACER BUSHING L8.2 |
67/48/1. | [1] | 146725-2300 | SPACER BUSHING L8.4 |
67/48/1. | [1] | 146725-2400 | SPACER BUSHING L8.6 |
67/49. | [1] | 146721-3621 | COVER |
67/50. | [1] | 146722-0200 | FLAT-HEAD SCREW |
67/51. | [1] | 146600-0300 | O-RING |
67/53. | [1] | 013020-6040 | UNION NUT M6P1H5 |
67/54. | [2] | 139006-4600 | BLEEDER SCREW |
67/54. | [2] | 139006-4600 | BLEEDER SCREW |
67/55. | [2] | 139006-4800 | BLEEDER SCREW |
67/56. | [1] | 146723-0300 | CONTROL LEVER |
67/57. | [1] | 146712-0100 | BEARING PIN |
67/58. | [2] | 146620-0600 | CAPSULE |
67/59. | [2] | 026506-1040 | GASKET D9.9&6.2T1 |
67/60. | [1] | 146724-0300 | ELEMENT |
67/61. | [1] | 146724-0600 | CAPSULE |
67/64. | [1] | 146930-8900 | BRACKET |
67/78. | [1] | 146600-4400 | SEAL RING |
67/96. | [1] | 146930-9220 | BRACKET |
67/98. | [2] | 146648-2800 | SPACER BUSHING |
67/102. | [1] | 146930-9000 | BRACKET |
67/112. | [1] | 146930-9100 | BRACKET |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-4100 | THREADED PIN |
67/201B. | [1] | 146545-4200 | THREADED PIN |
67/201C. | [1] | 146545-4300 | THREADED PIN |
67/202. | [1] | 139208-0900 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
68. | [1] | 146810-4420 | CONTROL SHAFT |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146830-8720 | CONTROL LEVER |
72B. | [1] | 146830-8820 | CONTROL LEVER |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 013020-6040 | UNION NUT M6P1H5 |
95. | [1] | 146861-6920 | FULCRUM LEVER |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET D11.4&8.2T1 |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0300 | UNION NUT |
108. | [1] | 146570-0100 | GOVERNOR SHAFT |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM D20.2&8.3T1.05 |
110/1. | [1] | 146571-0100 | SHIM D20.2&8.3T1.25 |
110/1. | [1] | 146571-0200 | SHIM D20.2&8.3T1.45 |
110/1. | [1] | 146571-0300 | SHIM D20.2&8.3T1.65 |
110/1. | [1] | 146571-0400 | SHIM D20.2&8.3T1.85 |
110/1. | [1] | 146571-0500 | SHIM D20.2&8.3T1.15 |
110/1. | [1] | 146571-0600 | SHIM D20.2&8.3T1.35 |
110/1. | [1] | 146571-0700 | SHIM D20.2&8.3T1.55 |
110/1. | [1] | 146571-0800 | SHIM D20.2&8.3T1.75 |
111. | [1] | 146602-0600 | PLAIN WASHER D20&8.4T1.40 |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER D17&6.4T1.60 |
115. | [1] | 146875-8200 | SLIDING SLEEVE |
116. | [1] | 146576-0200 | CAP |
117/1. | [1] | 146577-1800 | PLUG L2.10 |
117/1. | [1] | 146577-1900 | PLUG L2.30 |
117/1. | [1] | 146577-2000 | PLUG L2.50 |
117/1. | [1] | 146577-2100 | PLUG L2.70 |
117/1. | [1] | 146577-2200 | PLUG L2.90 |
117/1. | [1] | 146577-2300 | PLUG L3.10 |
117/1. | [1] | 146577-2400 | PLUG L3.30 |
117/1. | [1] | 146577-2500 | PLUG L3.50 |
117/1. | [1] | 146577-2600 | PLUG L3.70 |
117/1. | [1] | 146577-2700 | PLUG L3.90 |
117/1. | [1] | 146577-2800 | PLUG L4.10 |
117/1. | [1] | 146577-2900 | PLUG L4.30 |
117/1. | [1] | 146577-3000 | PLUG L4.50 |
117/1. | [1] | 146577-3100 | PLUG L4.70 |
117/1. | [1] | 146577-3200 | PLUG L4.90 |
117/1. | [1] | 146577-3300 | PLUG L5.10 |
117/1. | [1] | 146577-6700 | PLUG L2.2 |
117/1. | [1] | 146577-6800 | PLUG L2.4 |
117/1. | [1] | 146577-6900 | PLUG L2.6 |
117/1. | [1] | 146577-7000 | PLUG L2.8 |
117/1. | [1] | 146577-7100 | PLUG L3.0 |
117/1. | [1] | 146577-7200 | PLUG L3.2 |
117/1. | [1] | 146577-7300 | PLUG L3.4 |
117/1. | [1] | 146577-7400 | PLUG L3.6 |
117/1. | [1] | 146577-7500 | PLUG L3.8 |
117/1. | [1] | 146577-7600 | PLUG L4.0 |
117/1. | [1] | 146577-7700 | PLUG L4.2 |
117/1. | [1] | 146577-7800 | PLUG L4.4 |
117/1. | [1] | 146577-7900 | PLUG L4.6 |
117/1. | [1] | 146577-8000 | PLUG L4.8 |
117/1. | [1] | 146577-8100 | PLUG L5.0 |
117/1. | [1] | 146877-0000 | PLUG L5.2 |
117/1. | [1] | 146877-0100 | PLUG L5.3 |
117/1. | [1] | 146877-0200 | PLUG L5.4 |
117/1. | [1] | 146877-0300 | PLUG L5.5 |
117/1. | [1] | 146877-4700 | PLUG |
117/1. | [1] | 146877-4800 | PLUG |
117/1. | [1] | 146877-4900 | PLUG |
117/1. | [1] | 146877-5000 | PLUG |
123. | [4] | 146620-0500 | HEX-SOCKET-HEAD CAP SCREW |
130. | [1] | 146421-0020 | CAPSULE |
130/2. | [1] | 026508-1140 | GASKET D11.4&8.2T1 |
130/3. | [1] | 146422-0000 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0920 | CONTROL VALVE |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146688-1320 | PULLING ELECTROMAGNET |
137. | [2] | 139514-0200 | GASKET |
145. | [1] | 146621-1000 | UNION NUT |
147. | [1] | 146600-5000 | O-RING |
200. | [1] | 146206-0100 | COILED SPRING |
205. | [1] | 029470-4030 | WOODRUFF KEY |
217. | [1] | 146542-5300 | SLOTTED WASHER |
218. | [1] | 146592-2500 | COILED SPRING |
219. | [1] | 146541-3000 | BUSHING |
220. | [1] | 146592-2600 | COILED SPRING |
224. | [1] | 139006-4700 | BLEEDER SCREW |
230. | [1] | 146931-2000 | BRACKET |
231. | [1] | 139006-4600 | BLEEDER SCREW |
232. | [1] | 146931-6601 | BRACKET |
233. | [1] | 146662-3220 | WIRE |
234. | [1] | 139006-4800 | BLEEDER SCREW |
235. | [1] | 146931-6100 | BRACKET |
236. | [1] | 139006-4700 | BLEEDER SCREW |
237. | [1] | 146620-0200 | HEX-SOCKET-HEAD CAP SCREW |
240. | [1] | 146650-1220 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
243. | [1] | 146621-1000 | UNION NUT |
244. | [1] | 146931-7220 | BRACKET |
245. | [3] | 139512-0500 | GASKET |
245. | [3] | 139512-0500 | GASKET |
246. | [1] | 139812-1900 | EYE BOLT |
247. | [1] | 146666-6820 | PIPE |
248. | [1] | 146614-0200 | SPACER BUSHING |
261. | [1] | 139006-4700 | BLEEDER SCREW |
275. | [1] | 146612-7420 | BRACKET |
276. | [2] | 010010-2040 | BLEEDER SCREW M10P1.5L20 |
280. | [1] | 146361-3720 | START ADVANCE ASSY |
281. | [1] | 146600-0800 | O-RING |
283. | [1] | 146679-2620 | ADJUSTING DEVICE |
284. | [2] | 139005-0400 | BLEEDER SCREW |
294. | [1] | 146666-7520 | INLET UNION |
310. | [1] | 146673-9922 | POTENTCIOMETER |
310/2. | [2] | 139104-0400 | FLAT-HEAD SCREW |
310/3. | [1] | 146648-2900 | JOINT CONNECTION |
310/3B. | [1] | 146648-3000 | JOINT CONNECTION |
310/3C. | [1] | 146648-3100 | JOINT CONNECTION |
310/3D. | [1] | 146648-3200 | JOINT CONNECTION |
310/3E. | [1] | 146648-3300 | JOINT CONNECTION |
310/3F. | [1] | 146648-4700 | JOINT CONNECTION |
310/3G. | [1] | 146648-5300 | JOINT CONNECTION |
310/3H. | [1] | 146649-1700 | JOINT CONNECTION |
310/4. | [1] | 146661-0601 | BOOT |
312. | [1] | 146933-6000 | BRACKET |
313. | [1] | 020106-1240 | BLEEDER SCREW M6P1.0L12 |
344. | [1] | 146666-7620 | INLET UNION |
800S. | [1] | 146018-5020 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0700 | PACKING RING |
804S. | [1] | 146232-0720 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
821S. | [1] | 146210-5720 | ROLLER SET |
835S. | [1] | 146598-1000 | CAP |
836S/1. | [1] | 146598-0600 | CAP L18 |
836S/1. | [1] | 146598-0700 | CAP L21 |
836S/1. | [1] | 146598-0800 | CAP L24 |
836S/1. | [1] | 146598-0900 | CAP L27 |
903. | [1] | 146672-2820 | PULSE GENERATOR |
903/2. | [1] | 146600-1300 | O-RING &13W1.9 |
906. | [1] | 146959-6600 | NAMEPLATE |
910S. | [1] | 146600-4320 | PARTS SET |
911S. | [1] | 146672-2820 | PULSE GENERATOR |
911S/2. | [1] | 146600-1300 | O-RING &13W1.9 |
912S. | [1] | 026508-1140 | GASKET D11.4&8.2T1 |
913S. | [1] | 146422-0000 | BLEEDER SCREW |
914S. | [1] | 146699-0020 | VALVE SET |
914S. | [1] | 146699-0020 | VALVE SET |
914S. | [1] | 146699-0020 | VALVE SET |
915S. | [1] | 146662-3220 | WIRE |
916S. | [1] | 025804-1610 | WOODRUFF KEY |
917S. | [1] | 146684-2310 | POTENTCIOMETER |
Include in #2:
104741-3360
as INJECTION-PUMP ASSEMBLY
Cross reference number
BOSCH
9 460 610 992
9460610992
ZEXEL
104741-3360
1047413360
Zexel num
Bosch num
Firm num
Name
Calibration Data:
Adjustment conditions
Test oil
1404 Test oil ISO4113orSAEJ967d
1404 Test oil ISO4113orSAEJ967d
Test oil temperature
degC
45
45
50
Nozzle
105780-0060
Bosch type code
NP-DN0SD1510
Nozzle holder
105780-2150
Opening pressure
MPa
13
13
13.3
Opening pressure
kgf/cm2
133
133
136
Injection pipe
157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450
Inside diameter - outside diameter - length (mm) mm 2-6-450
Joint assembly
157641-4720
Tube assembly
157641-4020
Transfer pump pressure
kPa
20
20
20
Transfer pump pressure
kgf/cm2
0.2
0.2
0.2
Direction of rotation (viewed from drive side)
Right R
Right R
(Solenoid timer adjustment condition)
With S/T O-ring; S/T OFF. OFF
With S/T O-ring; S/T OFF. OFF
Injection timing adjustment
Pump speed
r/min
750
750
750
Boost pressure
kPa
0
0
0
Boost pressure
kgf/cm2
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
54.6
54.1
55.1
Difference in delivery
mm3/st.
4.5
Basic
*
Oil temperature
degC
50
48
52
Remarks
NA
NA
Injection timing adjustment_02
Pump speed
r/min
750
750
750
Boost pressure
kPa
40
38.7
41.3
Boost pressure
kgf/cm2
0.41
0.396
0.424
Boost pressure
mmHg
300
290
310
Average injection quantity
mm3/st.
68
67.5
68.5
Difference in delivery
mm3/st.
5.5
Basic
*
Oil temperature
degC
50
48
52
Remarks
CBS
CBS
Injection timing adjustment_03
Pump speed
r/min
1000
1000
1000
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
78.4
77.9
78.9
Difference in delivery
mm3/st.
6.5
Basic
*
Oil temperature
degC
50
48
52
Remarks
Full
Full
Injection timing adjustment_04
Pump speed
r/min
750
750
750
Boost pressure
kPa
0
0
0
Boost pressure
kgf/cm2
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
54.6
53.6
55.6
Basic
*
Oil temperature
degC
50
48
52
Remarks
NA
NA
Injection timing adjustment_05
Pump speed
r/min
750
750
750
Boost pressure
kPa
40
38.7
41.3
Boost pressure
kgf/cm2
0.41
0.396
0.424
Boost pressure
mmHg
300
290
310
Average injection quantity
mm3/st.
68
67
69
Basic
*
Oil temperature
degC
50
48
52
Remarks
CBS
CBS
Injection timing adjustment_06
Pump speed
r/min
1000
1000
1000
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
78.4
77.4
79.4
Difference in delivery
mm3/st.
7
Basic
*
Oil temperature
degC
50
48
52
Remarks
Full
Full
Injection timing adjustment_07
Pump speed
r/min
2000
2000
2000
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
71.5
67.5
75.5
Oil temperature
degC
50
48
52
Injection quantity adjustment
Pump speed
r/min
2475
2475
2475
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
26.4
23.4
29.4
Difference in delivery
mm3/st.
8
Basic
*
Oil temperature
degC
55
52
58
Injection quantity adjustment_02
Pump speed
r/min
3000
3000
3000
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
8
Oil temperature
degC
55
52
58
Injection quantity adjustment_03
Pump speed
r/min
2475
2475
2475
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
26.4
21.4
31.4
Difference in delivery
mm3/st.
8.5
Basic
*
Oil temperature
degC
55
52
58
Governor adjustment
Pump speed
r/min
400
400
400
Boost pressure
kPa
0
0
0
Boost pressure
kgf/cm2
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
18.9
16.9
20.9
Difference in delivery
mm3/st.
2
Basic
*
Oil temperature
degC
48
46
50
Governor adjustment_02
Pump speed
r/min
400
400
400
Boost pressure
kPa
0
0
0
Boost pressure
kgf/cm2
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
18.9
16.4
21.4
Difference in delivery
mm3/st.
2.5
Basic
*
Oil temperature
degC
48
46
50
Governor adjustment_03
Pump speed
r/min
750
750
750
Boost pressure
kPa
0
0
0
Boost pressure
kgf/cm2
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
5
Oil temperature
degC
50
48
52
Timer adjustment
Pump speed
r/min
150
150
150
Boost pressure
kPa
0
0
0
Boost pressure
kgf/cm2
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
78.1
58.1
98.1
Basic
*
Oil temperature
degC
48
46
50
Remarks
Full
Full
Timer adjustment_02
Pump speed
r/min
150
150
150
Boost pressure
kPa
0
0
0
Boost pressure
kgf/cm2
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
78.1
58.1
98.1
Oil temperature
degC
48
46
50
Remarks
Full
Full
Speed control lever angle
Pump speed
r/min
400
400
400
Boost pressure
kPa
0
0
0
Boost pressure
kgf/cm2
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
0
0
0
Oil temperature
degC
48
46
50
Remarks
Magnet OFF at idling position
Magnet OFF at idling position
0000000901
Pump speed
r/min
1250
1250
1250
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Overflow quantity with S/T ON
cm3/min
740
610
870
Oil temperature
degC
50
48
52
Stop lever angle
Pump speed
r/min
1500
1500
1500
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Pressure with S/T ON
kPa
608
569
647
Pressure with S/T ON
kgf/cm2
6.2
5.8
6.6
Pressure with S/T OFF
kPa
500
480
520
Pressure with S/T OFF
kgf/cm2
5.1
4.9
5.3
Basic
*
Oil temperature
degC
50
48
52
Remarks
OFF
OFF
Stop lever angle_02
Pump speed
r/min
750
750
750
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Pressure with S/T OFF
kPa
275
226
324
Pressure with S/T OFF
kgf/cm2
2.8
2.3
3.3
Oil temperature
degC
50
48
52
Stop lever angle_03
Pump speed
r/min
1500
1500
1500
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Pressure with S/T ON
kPa
608
559
657
Pressure with S/T ON
kgf/cm2
6.2
5.7
6.7
Pressure with S/T OFF
kPa
500
471
529
Pressure with S/T OFF
kgf/cm2
5.1
4.8
5.4
Basic
*
Oil temperature
degC
50
48
52
Remarks
OFF
OFF
Stop lever angle_04
Pump speed
r/min
2000
2000
2000
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Pressure with S/T OFF
kPa
618
569
667
Pressure with S/T OFF
kgf/cm2
6.3
5.9
6.7
Oil temperature
degC
50
48
52
0000001101
Pump speed
r/min
1500
1500
1500
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Timer stroke with S/T ON
mm
6.8
6.3
7.3
Timer stroke with S/T OFF
mm
4.1
3.9
4.3
Basic
*
Oil temperature
degC
50
48
52
Remarks
OFF
OFF
_02
Pump speed
r/min
1000
1000
1000
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Timer stroke with S/T ON
mm
3.5
2.8
4.2
Timer stroke with S/T OFF
mm
0.7
0
1.4
Oil temperature
degC
50
48
52
_03
Pump speed
r/min
1250
1250
1250
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Timer stroke with S/T OFF
mm
2.4
1.7
3.1
Oil temperature
degC
50
48
52
_04
Pump speed
r/min
1500
1500
1500
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Timer stroke with S/T ON
mm
6.8
6.1
7.5
Timer stroke with S/T OFF
mm
4.1
3.7
4.5
Basic
*
Oil temperature
degC
50
48
52
Remarks
OFF
OFF
_05
Pump speed
r/min
2300
2300
2300
Boost pressure
kPa
73.3
72
74.6
Boost pressure
kgf/cm2
0.75
0.736
0.764
Boost pressure
mmHg
550
540
560
Timer stroke with S/T OFF
mm
8.6
8.1
9
Oil temperature
degC
52
50
54
0000001201
Max. applied voltage
V
8
8
8
Test voltage
V
13
12
14
Timing setting
K dimension
mm
3.3
3.2
3.4
KF dimension
mm
5.8
5.7
5.9
MS dimension
mm
0.9
0.8
1
BCS stroke
mm
5.5
5.3
5.7
Control lever angle alpha
deg.
59
55
63
Control lever angle beta
deg.
41
36
46
Test data Ex:
0000001601 BOOST COMPENSATOR ADJUSTMENT
BCS adjustment procedure
1. At full boost pressure, set so that the full injection quantity is within the specifications (adjusting point).
2. Perform boost compensator intermediate operation point adjustment (pump speed N1, boost pressure P1).
3. When injection quantity at boost pressure P2 and pump speed N2 is not as specified, loosen nut (A) and adjust position of screw (B) so that injection quantity is as specified. The screw position should be within +-1 turn of initial position.
4. The nut tightening torque is T.
----------
N1=750r/min N2=750r/min P1=40.0kPa(300mmHg) P2=0kPa(0mmHg) T=6~9N-m(0.6~0.9kgf-m)
----------
SW=10mm T=6~9N-m(0.6~0.9kgf-m)
----------
N1=750r/min N2=750r/min P1=40.0kPa(300mmHg) P2=0kPa(0mmHg) T=6~9N-m(0.6~0.9kgf-m)
----------
SW=10mm T=6~9N-m(0.6~0.9kgf-m)
0000001801 POTENTIOMETER ADJUSTMENT
Adjustment of the potentiometer
Dummy bolt method
1. Hold the dummy bolt against the control lever at position N = N1 and Q = Q1 and fix using the lock nut.
2. At potentiometer adjustment, with the control lever contacting the dummy bolt, adjust the potentiometer so that the output voltage is V1.
3. After adjustment, remove the dummy bolt and confirm that the potentiometer output voltage at the control lever's idling and full speed positions is as specified above.
N:Pump speed
P:Boost pressure
Q:Injection quantity
V:Output voltage
A:Adjusting point
B:Checking point
C/L: control lever position
I:Idling
F:Full speed
Vi:Applied voltage
----------
N1=750r/min Q1=34.7+-1.0mm3/st V1=4.16+-0.03V
----------
N1=750r/min P1=0kPa(0mmHg) Q1=34.7+-1.0mm3/st V1=4.16+-0.03V V2=(2.16+-0.52V) V3=(9.02+-0.72V) Vi=10V
----------
N1=750r/min Q1=34.7+-1.0mm3/st V1=4.16+-0.03V
----------
N1=750r/min P1=0kPa(0mmHg) Q1=34.7+-1.0mm3/st V1=4.16+-0.03V V2=(2.16+-0.52V) V3=(9.02+-0.72V) Vi=10V
0000001901 W-CSD ADJUSTMENT
Adjustment of the W-CSD
Adjustment of the timer advance angle
Determine the timers stroke value from the graph and then adjust using the adjusting bolt.
(B) Timer stroke graph
(C) Graph TA = -0.04t+1.2 (0<= t <=30 deg C)
X:Temperature t (deg C)
Y:Timer stroke TA (mm)
----------
----------
----------
----------
0000002001 W-FICD LEVER ADJUSTMENT
W-FICD adjustment
(1)Insert a block gauge L1 determined from the graph between the control lever (B) and the idling set screw (A).
(2)Fix bolt (E) in the position where W-FICD lever (C) contacts the control lever (D). (Tighten to torque T.)
(3)Remove the block gauge and shims after completing adjustment.
Caution: The temperature of the wax at adjustment must not exceed a.
Y = control lever dimension L (control lever position)
X = temperature t (deg C)
----------
L1=L+-0.3mm T=3.4~4.9N-m(0.35~0.5kgf-m) a=35degC
----------
----------
L1=L+-0.3mm T=3.4~4.9N-m(0.35~0.5kgf-m) a=35degC
----------
0000002101 V-FICD ADJUSTMENT
Adjustment of the two stage actuator (FICD).
(1)Attach the 2-stage actuator to the injection pump.
(2)Position the control lever in the idling position.
(3)Adjust using nut (C) so that the clearance between the control lever and the rod is L1.
(4)Actuator stroke adjustment is not necessary.
(5)Allowable angle when adjusting the rod position: c
(A): Actuator stroke
(B): Stroke adjusting nut
(C): Rod position adjusting nut
----------
L1=1+1mm c=+-20deg
----------
L1=1+1mm SW1=SW7 SW2=SW8 T1=1.4~2.0N-m(0.14~0.2kgf-m) T2=3.4~4.9N-m(0.35~0.5kgf-m) a=20deg b=20deg
----------
L1=1+1mm c=+-20deg
----------
L1=1+1mm SW1=SW7 SW2=SW8 T1=1.4~2.0N-m(0.14~0.2kgf-m) T2=3.4~4.9N-m(0.35~0.5kgf-m) a=20deg b=20deg