101697-9030 ZEXEL 9 400 616 170 BOSCH INJECTION-PUMP ASSEMBLY 9400616170 1016979030 1671395313

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101697-9030 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 170 9400616170

ZEXEL 101697-9030 1016979030

NISSAN-DIESEL 1671395313 1671395313

Service parts 101697-9030 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101069-5000

3. GOVERNOR 105921-9790

4. SUPPLY PUMP 105220-7060

5. AUTOM. ADVANCE MECHANIS 105672-0730

6. COUPLING PLATE 105662-1630

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-5620

11. Nozzle and Holder 16600-95015

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105031-4620

14. NOZZLE 105015-7360

15. NOZZLE SET

Include in #1:

101697-9030 as INJECTION-PUMP ASSEMBLY

106871-7100 as _

Cross reference number

BOSCH 9 400 616 170 9400616170

ZEXEL 101697-9030 1016979030

NISSAN-DIESEL 1671395313 1671395313

Zexel num

Bosch num

Firm num

Name

101697-9030

9 400 616 170

1671395313 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
NE6T K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-1520

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.7 3.65 3.75

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point -

Rack position 13.5

Pump speed r/min 1400 1400 1400

Average injection quantity mm3/st. 108.5 106.9 110.1

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 9.5+-0.5

Pump speed r/min 275 275 275

Average injection quantity mm3/st. 8 6.2 9.8

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(13.5)

Pump speed r/min 1400 1400 1400

Average injection quantity mm3/st. 108.5 107.5 109.5

Basic *

Fixing the lever *

Boost pressure kPa 32 32

Boost pressure mmHg 240 240

Injection quantity adjustment_04

Adjusting point B

Rack position R1-0.05

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 101 97.8 104.2

Fixing the lever *

Boost pressure kPa 32 32

Boost pressure mmHg 240 240

Injection quantity adjustment_05

Adjusting point C

Rack position 12.2+-0. 5

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 57.5 55.5 59.5

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_06

Adjusting point I

Rack position -

Pump speed r/min 150 150 150

Average injection quantity mm3/st. 85 85 105

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Rack limit *

Boost compensator adjustment

Pump speed r/min 600 600 600

Rack position R2-1.45

Boost pressure kPa 3.3 2 4.6

Boost pressure mmHg 25 15 35

Boost compensator adjustment_02

Pump speed r/min 600 600 600

Rack position R2-1.15

Boost pressure kPa 6.7 5.4 8

Boost pressure mmHg 50 40 60

Boost compensator adjustment_03

Pump speed r/min 600 600 600

Rack position R2(R1-0. 6)

Boost pressure kPa 18.7 18.7 18.7

Boost pressure mmHg 140 140 140

Timer adjustment

Pump speed r/min 920--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 870

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1400

Advance angle deg. 2 1.5 2.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke
----------
T1=N06
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=100mm
----------
a=26.5deg+-5deg b=43deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Use the hole at R = aa
----------
aa=36mm
----------
a=20deg+-5deg b=40deg+-5deg

0000001501 ACS

(A) Set screw (B) Push rod 1 (C) Push rod 2 (D) Cover 1. Aneroid compensator unit adjustment (1)Select the push rod 2 to obtain L2. (2)Screw in (A) to obtain L1. 2. Adjustment when mounting the governor. (1)Set the speed of the pump to N1 r/min and fix the control lever at the full set position. (2)Screw in the aneroid compensator to obtain the performance shown in the graph above. (3)As there is hysterisis, measure when the absolute pressure drops. (4)Hysterisis must not exceed rack position = h1.
----------
N1=1400r/min L1=(1.5)mm L2=11+-0.5mm h1=-
----------
Ra=R1(13.5)mm Rb=(R1-2.05)mm Pa=90.1+-2.7kPa(676+-20mmHg) Pb=52.5+-0.7kPa(394+-5mmHg) Q1=108.5+-1cm3/1000st Q2=74+-3cm3/1000st