101609-3730 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016093730

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101609-3730 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101609-3730 1016093730

Service parts 101609-3730 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101061-8860

3. GOVERNOR 105411-2640

4. SUPPLY PUMP 105210-6260

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-6260

11. Nozzle and Holder 6221-13-3500

12. Open Pre:MPa(Kqf/cm2) 23.0{235}

13. NOZZLE-HOLDER 105048-3560

14. NOZZLE 105017-1960

15. NOZZLE SET

Include in #1:

101609-3730 as INJECTION-PUMP ASSEMBLY

Include in #2:

104265-4061 as _

Cross reference number

ZEXEL 101609-3730 1016093730

Zexel num

Bosch num

Firm num

Name

101609-3730

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-3420

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 255 255 255

Tester oil delivery pressure kgf/cm2 2.6 2.6 2.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.6 3.55 3.65

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 9.2

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 117 116 118

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the rack *

Boost pressure kPa 152 152

Boost pressure mmHg 1140 1140

Injection quantity adjustment_02

Adjusting point C

Rack position 6.4+-0.5

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 13.5 12.3 14.7

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_03

Adjusting point D

Rack position 10.85++

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 125 120 130

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Rack limit *

Boost compensator adjustment

Pump speed r/min 700 700 700

Rack position R1-2.1

Boost pressure kPa 40 37.3 42.7

Boost pressure mmHg 300 280 320

Boost compensator adjustment_02

Pump speed r/min 700 700 700

Rack position R1(10.35 )

Boost pressure kPa 139 139 139

Boost pressure mmHg 1040 1040 1040

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL (5)Set idle sub-spring
----------
K=14 BCL=2.1+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)When pump speed set at bb (3)Set the speed at cc (at delivery) (4)Stopper bolt setting
----------
aa=80mm bb=750r/min cc=900r/min
----------
a=8deg+-5deg b=9deg+-5deg c=21deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Use the pin at R = aa (2)Rack position bb, pump speed cc (3)Normal
----------
aa=33.6mm bb=1-0.2mm cc=0r/min
----------
a=27.5deg+-5deg b=(55deg)

Timing setting

(1)Pump vertical direction (2)Position of camshaft's key groove at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(50deg)