Rating:
Information injection-pump assembly
BOSCH
F 01G 000 00G
f01g00000g
ZEXEL
101609-3330
1016093330
KOMATSU
3863499
3863499
You can buy parts: .
Injection Pump for Zexel 101609-3330
Greneric Part Number:101609-3330,1016093330 || Applications: For Zexel
Greneric Part Number:101609-3330,1016093330 || Applications: For Zexel
Service parts 101609-3330 INJECTION-PUMP ASSEMBLY:
1.
_
5.
AUTOM. ADVANCE MECHANIS
6.
COUPLING PLATE
7.
COUPLING PLATE
8.
_
9.
_
10.
NOZZLE AND HOLDER ASSY
11.
Nozzle and Holder
12.
Open Pre:MPa(Kqf/cm2)
21.6{220}
13.
NOZZLE-HOLDER
14.
NOZZLE
15.
NOZZLE SET
Include in #1:
101609-3330
as INJECTION-PUMP ASSEMBLY
Include in #2:
104058-3420
as _
Cross reference number
BOSCH
F 01G 000 00G
f01g00000g
ZEXEL
101609-3330
1016093330
KOMATSU
3863499
3863499
| Zexel num | Bosch num | Firm num | Firm | Name |
| 101609-3330 | F 01G 000 00G | 3863499 | KOMATSU |
INJECTION-PUMP ASSEMBLY
SA6D102E K 14BE INJECTION PUMP ASSY PE6A PE |
| 101609-3330 | F 01G 000 00G | 6736711131 | KOMATSU |
INJECTION-PUMP ASSEMBLY
SA6D102E K 14BE INJECTION PUMP ASSY PE6A PE |
Calibration Data:
Adjustment conditions Test oil ISO4113 or {SAEJ967d}
1404 Test oil
Test oil temperature
degC
40
40
45
Nozzle and nozzle holder
105780-8140
Bosch type code
EF8511/9A
Nozzle
105780-0000
Bosch type code
DN12SD12T
Nozzle holder
105780-2080
Bosch type code
EF8511/9
Opening pressure
MPa
17.2
Opening pressure
kgf/cm2
175
Injection pipe
mm
6-2-600
Outer diameter - inner diameter - length (mm)
Outer diameter - inner diameter - length (mm)
Overflow valve
131424-3420
Overflow valve opening pressure
kPa
255
221
289
Overflow valve opening pressure
kgf/cm2
2.6
2.25
2.95
Tester oil delivery pressure
kPa
157
157
157
Tester oil delivery pressure
kgf/cm2
1.6
1.6
1.6
Direction of rotation (viewed from drive side)
R
Right
Right
Injection timing adjustment Direction of rotation (viewed from drive side) R
Right
Injection order
1-5-3-6-
2-4
Pre-stroke
mm
2.5
2.45
2.55
Beginning of injection position
NO.1
Drive side
Drive side
Difference between angles 1
deg.
60
59.5
60.5
Cal 1-5
Cal 1-5
Difference between angles 2
deg.
120
119.5
120.5
Cal 1-3
Cal 1-3
Difference between angles 3
deg.
180
179.5
180.5
Cal 1-6
Cal 1-6
Difference between angles 4
deg.
240
239.5
240.5
Cyl.1-2
Cyl.1-2
Difference between angles 5
deg.
300
299.5
300.5
Cal 1-4
Cal 1-4
Injection quantity adjustment Adjusting point A
Rack position
10.3
Pump speed
r/min
1050
1050
1050
Average injection quantity
mm3/st.
106.5
105.5
107.5
Max. variation between cylinders
%
0
-2.5
2.5
Basic
*
Fixing the lever
*
Injection quantity adjustment_02 Adjusting point -
Rack position
7.3+-0.5
Pump speed
r/min
500
500
500
Average injection quantity
mm3/st.
15
14
16
Max. variation between cylinders
%
0
-15
15
Fixing the rack
*
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
Adjust only variation between cylinders; adjust governor according to governor specifications.
Injection quantity adjustment_03 Adjusting point D
Rack position
-
Pump speed
r/min
100
100
100
Average injection quantity
mm3/st.
80
80
90
Fixing the lever
*
Rack limit
*
Test data Ex:
Governor adjustment
N:Pump speed
R:Rack position (mm)
(1)Target notch: K
(2)Tolerance for racks not indicated: +-0.05mm.
(3)Adjust the secondary timing before adjusting the governor.
(4)RACK LIMIT
----------
K=13
----------
Speed control lever angle
F:Full speed
I:Idle
S:Speed
(1)Use the center of the hole at R = aa
----------
aa=77mm
----------
a=21deg+-3deg b=32deg+-3deg c=36deg+-5deg
Timing setting
(1)Pump vertical direction
(2)Key groove position at No. 1 cylinder's beginning of injection position (at BTDC: aa).
(3)Position of the key groove of the No. 1 cylinder at B.T.D.C. bb (fix the governor flyweight at this position for delivery).
(4)B.T.D.C.: aa
(5)At second timing adjustment, set the camshaft at the * position and tighten the flyweight locknut.
(6)Align the flyweight's timing gear position with the lockpin groove and then fully tighten the flyweight to the camshaft.
(7)Remove the lock pin and adjust the governor. Reinstall the lock pin to fix the flyweight for delivery.
----------
aa=20deg bb=0deg
----------
a=54deg54min+-3deg b=10deg+-30min
Have questions with 101609-3330?
Group cross 101609-3330 ZEXEL
Komatsu
Komatsu
Komatsu
101609-3330
F 01G 000 00G
3863499
INJECTION-PUMP ASSEMBLY
SA6D102E
SA6D102E
101609-3330
F 01G 000 00G
6736711131
INJECTION-PUMP ASSEMBLY
SA6D102E
SA6D102E