101608-6510 ZEXEL 9 400 619 518 BOSCH INJECTION-PUMP ASSEMBLY 9400619518 1016086510


101608-6510 INJECTION-PUMP ASSEMBLY
Rating:
74
Buy INJECTION-PUMP ASSEMBLY 101608-6510 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 619 518 9400619518
ZEXEL 101608-6510 1016086510

Service parts 101608-6510 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-6730
3. GOVERNOR 105411-2600
4. SUPPLY PUMP 105210-5450
5. AUTOM. ADVANCE MECHANIS 105680-5100
6. COUPLING PLATE 105663-1150
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-5311
11. Nozzle and Holder ME441294
12. Open Pre:MPa(Kqf/cm2) 17.7{180}
13. NOZZLE-HOLDER 105030-3660
14. NOZZLE 105025-3960
15. NOZZLE SET

Include in #1:

101608-6510 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 619 518 9400619518
ZEXEL 101608-6510 1016086510


Zexel num
Bosch num
Firm num
Name
101608-6510 
101608-6511 
9 400 619 518 
   
INJECTION-PUMP ASSEMBLY
* K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.5 4.45 4.55
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.4
Pump speed r/min   1125 1125 1125
Average injection quantity mm3/st.   90.5 89.5 91.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Boost pressure kPa   26.7 26.7
Boost pressure mmHg   200 200
Injection quantity adjustment_02
Adjusting point   -
Rack position   8.1+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   16.5 15 18
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   E
Rack position   10.6++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   100 100 110
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   R1-0.15
Boost pressure kPa   11.3 11.3 11.3
Boost pressure mmHg   85 85 85
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   R1-0.1
Boost pressure kPa   12 9.3 14.7
Boost pressure mmHg   90 70 110
Boost compensator adjustment_03
Pump speed r/min   500 500 500
Rack position   R1(9.75)
Boost pressure kPa   13.3 13.3 13.3
Boost pressure mmHg   100 100 100
Timer adjustment
Pump speed r/min   0
Advance angle deg.   3 2.5 3.5
Load   0/4
Timer adjustment_02
Pump speed r/min   550+50
Advance angle deg.   3 2.5 3.5
Load   0/4
Remarks
Start
 
Timer adjustment_03
Pump speed r/min   650-50
Advance angle deg.   0 0 0
Load   0/4
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101608-6510
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL (5)Set idle sub-spring (6)Main spring setting (7)Rack difference between N = N1 and N = N2
----------
K=6 BCL=0.15+-0.1mm N1=1125r/min N2=550r/min
----------

Speed control lever angle

Test data 101608-6510
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=20deg+-5deg b=1deg+-5deg

Stop lever angle

Test data 101608-6510
N:Pump normal S:Stop the pump. (1)Normal (2)Pump speed aa and rack position bb (to be sealed at delivery)
----------
aa=0r/min bb=1-0.5mm
----------
a=35deg+-5deg b=(55deg)

0000001501 TAMPER PROOF

Test data 101608-6510
Tamperproofing-equipped boost compensator cover installation procedure (A) After adjusting the boost compensator, tighten the bolts to remove the heads. (1)Before adjusting the governor and the boost compensator, tighten the screw to the specified torque. (Tightening torque T = T1 maximum) (2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T2 maximum)
----------
T1=2.5N-m(0.25kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m)
----------

Timing setting

Test data 101608-6510
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=8deg
----------
a=(3deg)




Have questions with 101608-6510?





Group cross 101608-6510 ZEXEL

9 400 619 517 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 857 
ME441559 
INJECTION-PUMP ASSEMBLY
6D16TL
101608-6510  

101608-6511 
9 400 619 518 
 
INJECTION-PUMP ASSEMBLY
9 400 613 229 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 027 
ME441578 
INJECTION-PUMP ASSEMBLY
6D16TL
9 400 613 384 
 
INJECTION-PUMP ASSEMBLY
9 400 619 712 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z10 297 
ME441718 
INJECTION-PUMP ASSEMBLY
6D34TL
9 400 613 296 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 028 
ME441044 
INJECTION-PUMP ASSEMBLY
6D34TL
F 01G 09U 0J9 
ME443900 
INJECTION-PUMP ASSEMBLY
6D34TL
9 400 619 604 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 029 
ME442589 
INJECTION-PUMP ASSEMBLY
6D34TL
F 019 Z20 030 
ME442887 
INJECTION-PUMP ASSEMBLY
6D16TL
Back to top