101607-6910 ZEXEL 9 400 615 737 BOSCH INJECTION-PUMP ASSEMBLY 9400615737 1016076910 me158010

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101607-6910 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 737 9400615737

ZEXEL 101607-6910 1016076910

MITSUBISHI ME158010 me158010

Service parts 101607-6910 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-2840

3. GOVERNOR 105412-2260

4. SUPPLY PUMP 105210-4150

5. AUTOM. ADVANCE MECHANIS 105614-4010

6. COUPLING PLATE 105662-0590

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-6211

11. Nozzle and Holder ME059621

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105030-5010

14. NOZZLE

105015-5330

15. NOZZLE SET

Include in #1:

101607-6910 as INJECTION-PUMP ASSEMBLY

Include in #2:

104746-5130 as _

Cross reference number

BOSCH 9 400 615 737 9400615737

ZEXEL 101607-6910 1016076910

MITSUBISHI ME158010 me158010

Zexel num

Bosch num

Firm num

Name

101607-6910

9 400 615 737

ME158010 MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D22C K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-4620

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.5 4.45 4.55

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 9.2

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 101 99 103

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 7.6+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 17.5 14.9 20.1

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Timer adjustment

Pump speed r/min 800+120

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1000

Advance angle deg. 0.9 0.4 1.4

Timer adjustment_03

Pump speed r/min 1100

Advance angle deg. 2.5 2 3

Timer adjustment_04

Pump speed r/min -

Advance angle deg. 4 4 5

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Torque spring does not operate. (4)The torque control spring must does not have a set force. (5)Main spring setting (6)Set at delivery (7)Rack difference between N = N1 and N = N2 (8)Set idle sub-spring
----------
K=15 N1=900r/min N2=600r/min
----------

Speed control lever angle

F:Full speed I:Idle S:Stop (1)Set the pump speed at aa (2)At delivery (3)Set the pump speed at bb.
----------
aa=1110r/min bb=910r/min
----------
a=25deg+-5deg b=32deg+-3deg c=10deg+-5deg d=(2deg) e=7deg+-5deg