101606-9050 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016069050 16713z5972


101606-9050 INJECTION-PUMP ASSEMBLY
Rating:
20
Buy INJECTION-PUMP ASSEMBLY 101606-9050 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101606-9050 1016069050
NISSAN-DIESEL 16713Z5972 16713z5972

Cross reference number

ZEXEL 101606-9050 1016069050
NISSAN-DIESEL 16713Z5972 16713z5972


Zexel num
Bosch num
Firm num
Name
101606-9050 
101606-9120 
 
16713Z5972  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FE6E * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-1420
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.7 3.65 3.75
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   12.6
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   80.1 78.5 81.7
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   11.5 9.7 13.3
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(12.6)
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   80.1 79.1 81.1
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1(12.6)
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   92.7 88.7 96.7
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1-0.2
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   68.2 65 71.4
Fixing the lever   *
Injection quantity adjustment_06
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   83 83 93
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   (1130)
Advance angle deg.   0 0 0
Remarks
Measure speed (beginning of operation).
 
Timer adjustment_02
Pump speed r/min   1200
Advance angle deg.   1 0.5 1.5
Timer adjustment_03
Pump speed r/min   1500
Advance angle deg.   5.5 5.2 5.8
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101606-9050
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=H05
----------

Speed control lever angle

Test data 101606-9050
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H' (3)Bottom lever
----------
aa=39mm
----------
a=26.5deg+-5deg b=38deg+-3deg

Stop lever angle

Test data 101606-9050
N:Pump normal S:Stop the pump. (1)Use the pin at R = aa
----------
aa=42mm
----------
a=20deg+-5deg b=40deg+-5deg

0000001501 LEVER

Test data 101606-9050
(a) Speed lever (B) Accelerator lever (C) Accelerator lever stopper bolt (D) Full speed side (E) idle side 1. Accelerator lever setting method With speed lever at idle position, from point S contact Back off the accelerator lever stopper bolt L and set. (Turn bolt L turns and set.)
----------

----------
r=33mm L=1+0.5mm

Timing setting

Test data 101606-9050
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101606-9050?





Group cross 101606-9050 ZEXEL

Hyundai 

9 400 615 549 
 
INJECTION-PUMP ASSEMBLY
6D16
9 400 615 550 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16
9 400 615 551 
 
INJECTION-PUMP ASSEMBLY
6D16

Nissan-Diesel 

F 01G 09U 04T 
16713Z5967 
INJECTION-PUMP ASSEMBLY
FE6A
 
16713Z5968 
INJECTION-PUMP ASSEMBLY
FE6E
101606-9050  

101606-9120 
 
16713Z5972 
INJECTION-PUMP ASSEMBLY
FE6E
 
16713Z5520 
INJECTION-PUMP ASSEMBLY
FE6A
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
16713Z5521 
INJECTION-PUMP ASSEMBLY
FE6B
 
16790Z5579 
INJECTION-PUMP ASSEMBLY
FD606
F 01G 09U 04U 
16713Z5976 
INJECTION-PUMP ASSEMBLY
FE6A
Back to top