101605-9630 ZEXEL 9 400 615 388 BOSCH INJECTION-PUMP ASSEMBLY 9400615388 1016059630


101605-9630 INJECTION-PUMP ASSEMBLY
Rating:
16
Buy INJECTION-PUMP ASSEMBLY 101605-9630 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 388 9400615388
ZEXEL 101605-9630 1016059630

Include in #2:

Cross reference number

BOSCH 9 400 615 388 9400615388
ZEXEL 101605-9630 1016059630


Zexel num
Bosch num
Firm num
Name
101605-9630 
9 400 615 388 
  DAEWOO
INJECTION-PUMP ASSEMBLY
DB58NA K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.1
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   56 55 57
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   6.4+-0.5
Pump speed r/min   415 415 415
Average injection quantity mm3/st.   6 4.7 7.3
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   100 90 110
Fixing the lever   *
Rack limit   *
Injection quantity adjustment_04
Adjusting point   E
Rack position   6.7+-0.5
Pump speed r/min   415 415 415
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -14 14
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101605-9630
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)Rack difference between N = N1 and N = N2
----------
K=4 N1=1100r/min N2=800r/min
----------

Speed control lever angle

Test data 101605-9630
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(0deg)+-5deg b=(19deg)+-5deg

Stop lever angle

Test data 101605-9630
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 101605-9630
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=18deg
----------
a=(90deg)




Have questions with 101605-9630?





Group cross 101605-9630 ZEXEL

Daewoo 

 
 
INJECTION-PUMP ASSEMBLY
D1146TI
9 400 615 386 
 
INJECTION-PUMP ASSEMBLY
D1146TI
9 400 615 387 
 
INJECTION-PUMP ASSEMBLY
DB58TI
 
 
INJECTION-PUMP ASSEMBLY
DB58T
9 400 611 164 
 
INJECTION-PUMP ASSEMBLY
DB58T
101605-9630  
9 400 615 388 
 
INJECTION-PUMP ASSEMBLY
DB58NA

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
DB58T

Nissan-Diesel 

9 400 615 389 
16790Z5611 
INJECTION-PUMP ASSEMBLY
FE654
9 400 615 390 
16712Z5513 
INJECTION-PUMP ASSEMBLY
FE655
9 400 619 927 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 612 999 
167004K000 
INJECTION-PUMP ASSEMBLY
FE6
9 400 611 441 
167004K001 
INJECTION-PUMP ASSEMBLY
FE6
Back to top