101603-1430 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016031430

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101603-1430 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101603-1430 1016031430

Cross reference number

ZEXEL 101603-1430 1016031430

Zexel num

Bosch num

Firm num

Name

101603-1430
101603-1431

MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D14T *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-4620

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3 2.95 3.05

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point -

Rack position 12.5

Pump speed r/min 850 850 850

Each cylinder's injection qty mm3/st. 88 85.8 90.2

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point C

Rack position 8.2+-0.5

Pump speed r/min 275 275 275

Each cylinder's injection qty mm3/st. 10.5 9 12

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(12.5)

Pump speed r/min 850 850 850

Average injection quantity mm3/st. 88 87 89

Fixing the lever *

Boost pressure kPa 55.3 55.3

Boost pressure mmHg 415 415

Injection quantity adjustment_04

Adjusting point B

Rack position R1(12.5)

Pump speed r/min 1500 1500 1500

Average injection quantity mm3/st. 84 80.6 87.4

Difference in delivery mm3/st. 6.8 6.8 6.8

Fixing the lever *

Boost pressure kPa 55.3 55.3

Boost pressure mmHg 415 415

Injection quantity adjustment_05

Adjusting point D

Rack position 11.5+-0. 5

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 67 66 68

Fixing the lever *

Boost pressure kPa 32.7 32.7 32.7

Boost pressure mmHg 245 245 245

Injection quantity adjustment_06

Adjusting point E

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 72 32 112

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 650 650 650

Rack position 11

Boost pressure kPa 22 22 22

Boost pressure mmHg 165 165 165

Boost compensator adjustment_02

Pump speed r/min 650 650 650

Rack position 11.5

Boost pressure kPa 28.7 27.4 30

Boost pressure mmHg 215 205 225

Boost compensator adjustment_03

Pump speed r/min 650 650 650

Rack position 12.5

Boost pressure kPa 42 35.3 48.7

Boost pressure mmHg 315 265 365

Timer adjustment

Pump speed r/min 1150+-50

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1300

Advance angle deg. 2 1.5 2.5

Timer adjustment_03

Pump speed r/min 1400

Advance angle deg. 3.5 3 4

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)Boost compensator stroke
----------
DL=6-0.2mm
----------

Speed control lever angle

F:Full speed
----------

----------
a=12.5deg+-5deg

0000000901

F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=35deg+-3deg b=55deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=0deg+-5deg b=41.5deg+-5deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=410r/min Ra=7.8mm
----------

Timing setting

(1)Pump vertical direction (2)Position of gear mark '2' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(90deg)