101603-0961 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016030961 1156018983


101603-0961 INJECTION-PUMP ASSEMBLY
Rating:
77
Buy INJECTION-PUMP ASSEMBLY 101603-0961 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101603-0961 1016030961
ISUZU 1156018983 1156018983

Service parts 101603-0961 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-2990
3. GOVERNOR 105931-6320
4. SUPPLY PUMP 105220-4561
5. AUTOM. ADVANCE MECHANIS 105612-3220
6. COUPLING PLATE 105661-0661
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4582
11. Nozzle and Holder 5-15300-089-1
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105031-3952
14. NOZZLE 105015-4130
15. NOZZLE SET

Include in #1:

101603-0961 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101603-0961 1016030961
ISUZU 1156018983 1156018983


Zexel num
Bosch num
Firm num
Name
101603-0961 
101603-0962 
 
1156018983  ISUZU
INJECTION-PUMP ASSEMBLY
6BD1 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.6
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   59.4 57.8 61
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   9.3 8 10.6
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(11.6)
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   59.4 58.4 60.4
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1(11.6)
Pump speed r/min   1600 1600 1600
Average injection quantity mm3/st.   63.1 59.1 67.1
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1-0.05
Pump speed r/min   1300 1300 1300
Average injection quantity mm3/st.   60.6 57.4 63.8
Fixing the lever   *
Injection quantity adjustment_06
Adjusting point   D
Rack position   R1+0.2
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   48.8 45.6 52
Fixing the lever   *
Injection quantity adjustment_07
Adjusting point   I
Rack position   (13.5)+0 .2
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   60.5 60.5 65.5
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1050--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1000
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1300
Advance angle deg.   1.8 1.3 2.3
Timer adjustment_04
Pump speed r/min   1600
Advance angle deg.   4 3.5 4.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101603-0961
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT: RAL
----------
T1=E00 RAL=(13.5)+0.2mm
----------

Speed control lever angle

Test data 101603-0961
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt setting
----------
aa=35mm
----------
a=39deg+-5deg b=40deg+-3deg

Stop lever angle

Test data 101603-0961
N:Pump normal S:Stop the pump.
----------

----------
a=25deg+-5deg b=40deg+-5deg

Timing setting

Test data 101603-0961
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(60deg)




Have questions with 101603-0961?





Group cross 101603-0961 ZEXEL

Isuzu 

 
1156018510 
INJECTION-PUMP ASSEMBLY
6QA1
 
1156018512 
INJECTION-PUMP ASSEMBLY
6QA1
 
1156019600 
INJECTION-PUMP ASSEMBLY
6SA1T
 
1156019610 
INJECTION-PUMP ASSEMBLY
6SA1T
 
1156018040 
INJECTION-PUMP ASSEMBLY
6QA1
 
1156018042 
INJECTION-PUMP ASSEMBLY
6QA1
 
1156019132 
INJECTION-PUMP ASSEMBLY
6BD1T
9 400 615 008 
1156019134 
INJECTION-PUMP ASSEMBLY
6BD1-T
 
1156019072 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 615 009 
1156019074 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156018982 
INJECTION-PUMP ASSEMBLY
6BD1
101603-0961  

101603-0962 
 
1156018983 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 615 010 
1156018985 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156016693 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156016703 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156016713 
INJECTION-PUMP ASSEMBLY
6BG1
Back to top