101602-2690 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016022690

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101602-2690 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101602-2690 1016022690

Service parts 101602-2690 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-5110

3. GOVERNOR 105400-7580

4. SUPPLY PUMP 105210-4990

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105662-1160

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-6280

11. Nozzle and Holder 23600-2133

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105030-4300

14. NOZZLE

105015-8590

15. NOZZLE SET

Include in #1:

101602-2690 as INJECTION-PUMP ASSEMBLY

101603-8423 as _

Cross reference number

ZEXEL 101602-2690 1016022690

Zexel num

Bosch num

Firm num

Name

101602-2690

INJECTION-PUMP ASSEMBLY

101602-2690
101602-2691

S220203940A HINO

INJECTION-PUMP ASSEMBLY
A * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 134424-0920

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.8 3.77 3.83

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.75 60.25

Difference between angles 2
Cyl.1-2 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cal 1-3 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-5 deg. 300 299.75 300.25

Injection quantity adjustment

Adjusting point A

Rack position 10

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 96.6 95.6 97.6

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point C

Rack position 7.5+-0.5

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 8.5 7.5 9.5

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Injection quantity adjustment_03

Adjusting point D

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 124 124 134

Fixing the lever *

Rack limit *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)RACK LIMIT (3)Rack difference between N = N1 and N = N2 (4)Idle sub spring setting: L1.
----------
K=12 N1=900r/min N2=500r/min L1=7.2-0.2mm
----------

Speed control lever angle

F:Full speed I:Idle S:Stop (1)Set the speed at aa (set the stopper bolt). (2)Set the pump speed at bb.
----------
aa=900r/min bb=750r/min
----------
a=(19deg)+-5deg b=(4deg)+-5deg c=35deg+-3deg d=(6deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Rack position aa or less, pump speed bb (2)- (3)Contacts normal side pin (4)Clearance from the pin on the normal side: cc
----------
aa=7mm bb=0r/min cc=2.5+-0.5mm
----------
a=53deg+-5deg b=51deg+-5deg c=(6deg)