Fuel injectors
  1. Home
  2. injection
  3. #1016019990

101601-9990 ZEXEL 9 400 614 700 BOSCH INJECTION-PUMP ASSEMBLY 9400614700 1016019990 1670095072


101601-9990 INJECTION-PUMP ASSEMBLY
Rating:
14
Buy INJECTION-PUMP ASSEMBLY 101601-9990 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 700 9400614700
ZEXEL 101601-9990 1016019990
NISSAN-DIESEL 1670095072 1670095072

Service parts 101601-9990 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-3350
3. GOVERNOR 105460-0590
4. SUPPLY PUMP 105220-7050
5. AUTOM. ADVANCE MECHANIS 105614-3360
6. COUPLING PLATE 105661-0601
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-5341
11. Nozzle and Holder 16600-95013
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-4620
14. NOZZLE 105015-6981
15. NOZZLE SET

Include in #1:

101405-3090 as _
101601-9990 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 700 9400614700
ZEXEL 101601-9990 1016019990
NISSAN-DIESEL 1670095072 1670095072


Zexel num
Bosch num
Firm num
Name
101601-9990 
9 400 614 700 
1670095072  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
NE6 * K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.8
Pump speed r/min   1400 1400 1400
Average injection quantity mm3/st.   79.4 78.4 80.4
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   9.2
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   68.3 66.3 70.3
Max. variation between cylinders %   0 -5 5
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   7.2+-0.5
Pump speed r/min   285 285 285
Average injection quantity mm3/st.   9 7.2 10.8
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   13.2+-0. 5
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   115 115
Fixing the lever   *
Remarks
After startup boost setting  
Timer adjustment
Pump speed r/min   550--
Advance angle deg.   0 0 0
Remarks
Start  
Timer adjustment_02
Pump speed r/min   500
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   800
Advance angle deg.   1.5 1 2
Timer adjustment_04
Pump speed r/min   1200
Advance angle deg.   4 3.5 4.5
Remarks
Finish  

Test data Ex:

Governor adjustment

Test data 101601-9990
N:Pump speed R:Rack position (mm) (1)Excess fuel setting for starting: SXL (2)Damper spring setting: DL
----------
SXL=10+0.2mm DL=6-0.2mm
----------

0000000901

Test data 101601-9990
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=16.5deg+-5deg b=21deg+-3deg

Stop lever angle

Test data 101601-9990
N:Pump normal S:Stop the pump. (1)Use the pin at R = aa
----------
aa=20mm
----------
a=40deg+-5deg b=71deg+-5deg

Timing setting

Test data 101601-9990
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(30deg)




Have questions with 101601-9990?





Group cross 101601-9990 ZEXEL

101601-9900  
 
 
INJECTION-PUMP ASSEMBLY
101601-9910  
 
 
INJECTION-PUMP ASSEMBLY
6110
101601-9920  

101601-9923 
 
 
INJECTION-PUMP ASSEMBLY
6110
101601-9921  

101601-9923 
 
 
INJECTION-PUMP ASSEMBLY
6110
101601-9922  

101601-9923 
9 400 610 293 
 
INJECTION-PUMP ASSEMBLY

China 

101601-9923  
9 400 614 697 
 
INJECTION-PUMP ASSEMBLY
6110

Nissan-Diesel 

101601-9930  

101601-9933 
 
 
INJECTION-PUMP ASSEMBLY
FE6B
101601-9931  

101601-9933 
9 400 610 055 
 
INJECTION-PUMP ASSEMBLY
FE6B
101601-9933  

101608-9090 
9 400 610 264 
16713Z5661 
INJECTION-PUMP ASSEMBLY
FE6B

Dpico 

101601-9940  
 
 
INJECTION-PUMP ASSEMBLY
6D16
101601-9950  
 
 
INJECTION-PUMP ASSEMBLY
6D16

Nissan-Diesel 

101601-9960  
9 400 610 565 
1670095068 
INJECTION-PUMP ASSEMBLY
NE6
101601-9970  
9 400 614 698 
1670095069 
INJECTION-PUMP ASSEMBLY
NE6

Daewoo 

101601-9980  

101601-9985 
 
 
INJECTION-PUMP ASSEMBLY
D1146
101601-9981  

101601-9985 
 
 
INJECTION-PUMP ASSEMBLY
D1146
101601-9982  

101601-9985 
 
 
INJECTION-PUMP ASSEMBLY
D1146
101601-9983  

101601-9985 
 
 
INJECTION-PUMP ASSEMBLY
D1146
101601-9984  

101601-9985 
 
 
INJECTION-PUMP ASSEMBLY
D1146
101601-9985  
9 400 614 699 
65111017238 
INJECTION-PUMP ASSEMBLY
D1146

Nissan-Diesel 

101601-9990  
9 400 614 700 
1670095072 
INJECTION-PUMP ASSEMBLY
NE6
Back to top