101601-9931 ZEXEL 9 400 610 055 BOSCH INJECTION-PUMP ASSEMBLY 9400610055 1016019931


101601-9931 INJECTION-PUMP ASSEMBLY
Rating:
82
Buy INJECTION-PUMP ASSEMBLY 101601-9931 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 055 9400610055
ZEXEL 101601-9931 1016019931

Include in #1:

Cross reference number

BOSCH 9 400 610 055 9400610055
ZEXEL 101601-9931 1016019931


Zexel num
Bosch num
Firm num
Name
101601-9931 
101601-9933 
9 400 610 055 
  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FE6B *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.8
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   66.3 64.7 67.9
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   9.5 7.7 11.3
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(11.8)
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   66.3 65.3 67.3
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1-0.2
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   73 69.8 76.2
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1(11.8)
Pump speed r/min   1400 1400 1400
Average injection quantity mm3/st.   81 77 85
Fixing the lever   *
Injection quantity adjustment_06
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   84 84 94
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   850--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   800
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1400
Advance angle deg.   2 1.5 2.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101601-9931
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT
----------
T1=B55
----------

Speed control lever angle

Test data 101601-9931
F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=26.5deg+-5deg b=(54deg)+-3deg

Stop lever angle

Test data 101601-9931
N:Pump normal S:Stop the pump.
----------

----------
a=20deg+-5deg b=40deg+-5deg

Timing setting

Test data 101601-9931
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101601-9931?





Group cross 101601-9931 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
6110
 
 
INJECTION-PUMP ASSEMBLY
6110
 
 
INJECTION-PUMP ASSEMBLY
6110
9 400 610 293 
 
INJECTION-PUMP ASSEMBLY

China 

9 400 614 697 
 
INJECTION-PUMP ASSEMBLY
6110

Nissan-Diesel 

 
 
INJECTION-PUMP ASSEMBLY
FE6B
101601-9931  

101601-9933 
9 400 610 055 
 
INJECTION-PUMP ASSEMBLY
FE6B
9 400 610 264 
16713Z5661 
INJECTION-PUMP ASSEMBLY
FE6B

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16

Nissan-Diesel 

9 400 610 565 
1670095068 
INJECTION-PUMP ASSEMBLY
NE6
9 400 614 698 
1670095069 
INJECTION-PUMP ASSEMBLY
NE6

Daewoo 

 
 
INJECTION-PUMP ASSEMBLY
D1146
 
 
INJECTION-PUMP ASSEMBLY
D1146
 
 
INJECTION-PUMP ASSEMBLY
D1146
 
 
INJECTION-PUMP ASSEMBLY
D1146
 
 
INJECTION-PUMP ASSEMBLY
D1146
9 400 614 699 
65111017238 
INJECTION-PUMP ASSEMBLY
D1146

Nissan-Diesel 

9 400 614 700 
1670095072 
INJECTION-PUMP ASSEMBLY
NE6
Back to top