101601-8950 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016018950 1156015131


101601-8950 INJECTION-PUMP ASSEMBLY
Rating:
10
Buy INJECTION-PUMP ASSEMBLY 101601-8950 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101601-8950 1016018950
ISUZU 1156015131 1156015131

Cross reference number

ZEXEL 101601-8950 1016018950
ISUZU 1156015131 1156015131


Zexel num
Bosch num
Firm num
Name
101601-8950 
101601-8951 
 
1156015131  ISUZU
INJECTION-PUMP ASSEMBLY
6BD1 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.6
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   60 58.4 61.6
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   290 290 290
Average injection quantity mm3/st.   9.2 7.9 10.5
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(11.6)
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   60 59 61
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1-0.4
Pump speed r/min   1600 1600 1600
Average injection quantity mm3/st.   52.5 49.3 55.7
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1-0.05
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   42.3 39.1 45.5
Fixing the lever   *
Timer adjustment
Pump speed r/min   1050--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1000
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1300
Advance angle deg.   1.8 1.3 2.3
Timer adjustment_04
Pump speed r/min   1600
Advance angle deg.   4 3.5 4.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101601-8950
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT: RAL
----------
T1=A86 RAL=17.3+0.2mm
----------

Speed control lever angle

Test data 101601-8950
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=35mm
----------
a=43deg+-5deg b=(45deg)+-3deg

Stop lever angle

Test data 101601-8950
N:Pump normal S:Stop the pump.
----------

----------
a=25deg+-5deg b=40deg+-5deg

0000001501 TAMPER PROOF

Test data 101601-8950
Tamper proof adjustment (1)Set the full load screw at rack position Ra+0.4. (2)Set the full load position Ra using screw (A).
----------
Ra=R1(11.6)mm
----------

Timing setting

Test data 101601-8950
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(60deg)




Have questions with 101601-8950?





Group cross 101601-8950 ZEXEL

Isuzu 

 
1156017372 
INJECTION-PUMP ASSEMBLY
6QA2
 
1156017373 
INJECTION-PUMP ASSEMBLY
6QA2
 
1156017430 
INJECTION-PUMP ASSEMBLY
6BD1-T
 
1156015072 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 676 
1156015075 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156015101 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156015102 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156015105 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156015121 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156015124 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 611 890 
1156015126 
INJECTION-PUMP ASSEMBLY
6BD1
101601-8950  

101601-8951 
 
1156015131 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156015134 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156015141 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156015144 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156015163 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156015173 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156015242 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 677 
1156015245 
INJECTION-PUMP ASSEMBLY
6BD1
Back to top