101601-8880 ZEXEL 9 400 614 675 BOSCH INJECTION-PUMP ASSEMBLY 9400614675 1016018880 1156017543


101601-8880 INJECTION-PUMP ASSEMBLY
Rating:
17
Buy INJECTION-PUMP ASSEMBLY 101601-8880 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 675 9400614675
ZEXEL 101601-8880 1016018880
ISUZU 1156017543 1156017543

Service parts 101601-8880 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-2900
3. GOVERNOR 105931-2420
4. SUPPLY PUMP 105220-7260
5. AUTOM. ADVANCE MECHANIS 105614-3201
6. COUPLING PLATE 105661-0661
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4821
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 18.1(185)
13. NOZZLE-HOLDER 105031-3611
14. NOZZLE 105015-4130
15. NOZZLE SET

Include in #1:

101601-8880 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 675 9400614675
ZEXEL 101601-8880 1016018880
ISUZU 1156017543 1156017543


Zexel num
Bosch num
Firm num
Name
101601-8880 
9 400 614 675 
1156017543  ISUZU
INJECTION-PUMP ASSEMBLY
6BG1 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.4
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   70.7 69.2 72.2
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   9.6+-0.5
Pump speed r/min   260 260 260
Average injection quantity mm3/st.   9.4 8.1 10.7
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(11.4)
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   70.7 69.7 71.7
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   (R1-0.4)
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   76 74.4 77.6
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   I
Rack position   -
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   86 86 96
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   550--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   500
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1500
Advance angle deg.   4 3.5 4.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101601-8880
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT
----------
T1=A66
----------

Speed control lever angle

Test data 101601-8880
F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=23deg+-5deg b=35deg+-3deg

Timing setting

Test data 101601-8880
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(60deg)




Have questions with 101601-8880?





Group cross 101601-8880 ZEXEL

Isuzu 

9 400 619 756 
1156016901 
INJECTION-PUMP ASSEMBLY
6QA1
 
1156016941 
INJECTION-PUMP ASSEMBLY
6QA1
 
1156017091 
INJECTION-PUMP ASSEMBLY
6QA1
 
1156017101 
INJECTION-PUMP ASSEMBLY
6QA1
 
1156017131 
INJECTION-PUMP ASSEMBLY
6QA1
 
1156017141 
INJECTION-PUMP ASSEMBLY
6QA1
 
1156017420 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156017421 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156017422 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156017423 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156017424 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 674 
1156017425 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156017440 
INJECTION-PUMP ASSEMBLY
6BG1
101601-8880  
9 400 614 675 
1156017543 
INJECTION-PUMP ASSEMBLY
6BG1
 
1156017362 
INJECTION-PUMP ASSEMBLY
6QA2
Back to top