101502-9150 ZEXEL F 019 Z10 973 BOSCH INJECTION-PUMP ASSEMBLY f019z10973 1015029150 1g41851011


101502-9150 INJECTION-PUMP ASSEMBLY
Rating:
50
Buy INJECTION-PUMP ASSEMBLY 101502-9150 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z10 973 f019z10973
ZEXEL 101502-9150 1015029150
KUBOTA 1G41851011 1g41851011

Service parts 101502-9150 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101050-8140
3. GOVERNOR 105419-5250
4. SUPPLY PUMP 105220-7220
5. AUTOM. ADVANCE MECHANIS 105676-8141
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-8352
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 18.6(190)/22.6(230)
13. NOZZLE-HOLDER 105048-4520
14. NOZZLE
15. NOZZLE SET 105019-1530

Include in #1:

101502-9150 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 019 Z10 973 f019z10973
ZEXEL 101502-9150 1015029150
KUBOTA 1G41851011 1g41851011


Zexel num
Bosch num
Firm num
Name
101502-9150 
F 019 Z10 973 
1G41851011  KUBOTA
INJECTION-PUMP ASSEMBLY
F5802- K 14BZ INJECTION PUMP ASSY PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-4120
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-3-5-4- 2
Pre-stroke mm   4 3.95 4.05
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   72 71.5 72.5
Difference between angles 2
Cal 1-5
deg.   144 143.5 144.5
Difference between angles 3
Cal 1-4
deg.   216 215.5 216.5
Difference between angles 4
Cyl.1-2
deg.   288 287.5 288.5
Injection quantity adjustment
Adjusting point   A
Rack position   13.2
Pump speed r/min   1200 1200 1200
Average injection quantity mm3/st.   102 101 103
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   12.55
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   107.5 97.5 117.5
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   7.7+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   13 11 15
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_04
Adjusting point   E
Rack position   13.4++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   115 115 125
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   (800)
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   (1100)
Advance angle deg.   2 1.7 2.3
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101502-9150
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set the idle spring. (5)The torque control spring must does not have a set force. (6)Rack difference between N = N1 and N = N2 (7)Rack difference between N = N3 and N = N4 (8)Idle sub spring setting: L1. (9)Main spring setting
----------
K=10 N1=1200r/min N2=650r/min N3=1200r/min N4=350r/min L1=8.3-0.5mm
----------

Speed control lever angle

Test data 101502-9150
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=15deg+-5deg b=37deg+-5deg

Stop lever angle

Test data 101502-9150
N:Pump normal S:Stop the pump. (1)Normal (2)Use the hole at R = aa
----------
aa=60mm
----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 101502-9150
(1)Pump vertical direction (2)Position of camshaft's key groove at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(130deg)




Have questions with 101502-9150?





Group cross 101502-9150 ZEXEL

Kubota 

9 400 613 101 
1655751011 
INJECTION-PUMP ASSEMBLY
F5802-GL
9 400 613 201 
1G41451011 
INJECTION-PUMP ASSEMBLY
F5802
9 400 614 557 
1G41651011 
INJECTION-PUMP ASSEMBLY
F5802
F 01G 09U 1GK 
1G4165101A 
INJECTION-PUMP ASSEMBLY
F5802
9 400 613 202 
1G41551011 
INJECTION-PUMP ASSEMBLY
F5802
F 019 Z10 972 
1G41751011 
INJECTION-PUMP ASSEMBLY
F5802-
101502-9150  
F 019 Z10 973 
1G41851011 
INJECTION-PUMP ASSEMBLY
F5802-
F 019 Z10 974 
1G41951011 
INJECTION-PUMP ASSEMBLY
F5802-
Back to top