101482-9030 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014829030


101482-9030 INJECTION-PUMP ASSEMBLY
Rating:
43
Buy INJECTION-PUMP ASSEMBLY 101482-9030 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101482-9030 1014829030

Cross reference number

ZEXEL 101482-9030 1014829030


Zexel num
Bosch num
Firm num
Name
101482-9030 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   2.8 2.75 2.85
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.5
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   61.6 60.6 62.6
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Boost pressure kPa   84 84
Boost pressure mmHg   630 630
Injection quantity adjustment_02
Adjusting point   B
Rack position   9.5
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   28.3 24.3 32.3
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   -
Rack position   8+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   10 8 12
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_04
Adjusting point   D
Rack position   13.3+-0. 5
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   81 71 91
Fixing the lever   *
Rack limit   *
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   9.5
Boost pressure kPa   12 10.7 13.3
Boost pressure mmHg   90 80 100
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   10.5
Boost pressure kPa   70.6 63.9 77.3
Boost pressure mmHg   530 480 580

Test data Ex:

Governor adjustment

Test data 101482-9030
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT
----------
K=10
----------

Speed control lever angle

Test data 101482-9030
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=11deg+-5deg b=27deg+-5deg

Stop lever angle

Test data 101482-9030
N:Pump normal S:Stop the pump.
----------

----------
a=16.5deg+-5deg b=50deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Test data 101482-9030
Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Maximum no-load speed (r/min) LABEL9:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)At high idle rack position L
----------
L=5.6mm
----------
a1=A a2=B a3=- a4=- r1=1100r/min r2=1000r/min r3=- r4=- Q1=68.8+-1mm3/st Q2=61.6+-1mm3/st Q3=- Q4=- c1=+-2.5% c2=+-2.5% c3=- c4=- a5=28 a6=27 a7=26 a8=25 a9=24 a10=23 a11=22 a12=21 a13=20 a14=- a15=- r5=1400r/min r6=1350r/min r7=1300r/min r8=1250r/min r9=1200r/min r10=1150r/min r11=1100r/min r12=1050r/min r13=1000r/min r14=- r15=- R5=1505+-35r/min R6=1450+-33r/min R7=1395+-32r/min R8=1340+-31r/min R9=1290+-30r/min R10=1235+-28r/min R11=1180+-27r/min R12=1130+-26r/min R13=1075+-25r/min R14=- R15=-

Timing setting

Test data 101482-9030
(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (position of gear's 'M' mark) (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(60deg)




Have questions with 101482-9030?





Group cross 101482-9030 ZEXEL

Daewoo 

 
 
INJECTION-PUMP ASSEMBLY
D0844
9 400 612 160 
65111017068 
INJECTION-PUMP ASSEMBLY
D0844M
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

F 019 Z10 813 
1679090174 
INJECTION-PUMP ASSEMBLY
FD33T04
 
1671290079 
INJECTION-PUMP ASSEMBLY
FD33T
101482-9030  
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 614 256 
1679090203 
INJECTION-PUMP ASSEMBLY
FD33T
9 400 611 502 
1671290112 
INJECTION-PUMP ASSEMBLY
FD33T
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 614 257 
1679090215 
INJECTION-PUMP ASSEMBLY
FD33T
 
1679090217 
INJECTION-PUMP ASSEMBLY
FD33T
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1679090307 
INJECTION-PUMP ASSEMBLY
BD2
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1679090309 
INJECTION-PUMP ASSEMBLY
BD30
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1679090310 
INJECTION-PUMP ASSEMBLY
BD304
Back to top