101481-9360 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014819360 1671290171

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101481-9360 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101481-9360 1014819360

NISSAN-DIESEL 1671290171 1671290171

Service parts 101481-9360 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101048-8160

3. GOVERNOR 105419-1560

4. SUPPLY PUMP 105220-5740

5. AUTOM. ADVANCE MECHANIS 105622-1870

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-6020

11. Nozzle and Holder 16600-90100

12. Open Pre:MPa(Kqf/cm2) 15.7{160}

13. NOZZLE-HOLDER 105048-3960

14. NOZZLE

105017-0900

15. NOZZLE SET

Include in #1:

101471-0201 as _

101481-9360 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101481-9360 1014819360

NISSAN-DIESEL 1671290171 1671290171

Zexel num

Bosch num

Firm num

Name

101481-9360
101481-9361

1671290171 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
BD30 * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-1520

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 3.2 3.15 3.25

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point A

Rack position 10.2

Pump speed r/min 1500 1500 1500

Average injection quantity mm3/st. 53 52 54

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point -

Rack position 9.1+-0.5

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 8 6 10

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Injection quantity adjustment_03

Adjusting point C

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 60 60 70

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min 1000--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 950

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1800

Advance angle deg. 4.2 3.7 4.7

Timer adjustment_04

Pump speed r/min -

Advance angle deg. 5 5 5

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)Rack difference between N = N1 and N = N2
----------
K=13 N1=1500r/min N2=400r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Set the pump speed at aa. ( At delivery ) (2)When pump speed set at bb (3)Stopper bolt setting (4)Stopper bolt setting
----------
aa=1825r/min bb=1515r/min
----------
a=31deg+-5deg b=19deg+-5deg c=9deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=12deg+-5deg b=53deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)-
----------

----------
a1=A a2=- r1=1500r/min r2=- Q1=53+-1mm3/st Q2=- c1=+-3.5% c2=- a3=36 a4=30 r3=1800r/min r4=1500r/min