101481-9330 ZEXEL 9 400 614 213 BOSCH INJECTION-PUMP ASSEMBLY 9400614213 1014819330 1670050t71

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101481-9330 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 213 9400614213

ZEXEL 101481-9330 1014819330

NISSAN-DIESEL 1670050T71 1670050t71

Service parts 101481-9330 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101048-9040

3. GOVERNOR 105921-4740

4. SUPPLY PUMP 105220-4840

5. AUTOM. ADVANCE MECHANIS 105670-0400

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-5970

11. Nozzle and Holder 16600-01D02

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105031-5490

14. NOZZLE 105015-7860

15. NOZZLE SET

Include in #1:

101401-0271 as _

101481-9330 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 213 9400614213

ZEXEL 101481-9330 1014819330

NISSAN-DIESEL 1670050T71 1670050t71

Zexel num

Bosch num

Firm num

Name

101481-9330

9 400 614 213

1670050T71 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
FD35T K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 2.6 2.55 2.65

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point -

Rack position 11

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 78 76.4 79.6

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 8.5+-0.5

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 9.5 7.5 11.5

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(11)

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 78 77 79

Basic *

Fixing the lever *

Boost pressure kPa 74.6 74.6

Boost pressure mmHg 560 560

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.15

Pump speed r/min 1750 1750 1750

Average injection quantity mm3/st. 91.1 87.1 95.1

Fixing the lever *

Boost pressure kPa 74.6 74.6

Boost pressure mmHg 560 560

Injection quantity adjustment_05

Adjusting point C

Rack position R2(10.3)

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 48.3 46.3 50.3

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_06

Adjusting point I

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 84 84 94

Fixing the lever *

Rack limit *

Boost compensator adjustment

Pump speed r/min 1100 1100 1100

Rack position (R1-1.1)

Boost pressure kPa 21.3 18.6 24

Boost pressure mmHg 160 140 180

Boost compensator adjustment_02

Pump speed r/min 1100 1100 1100

Rack position R1(11)

Boost pressure kPa 61.3 61.3 61.3

Boost pressure mmHg 460 460 460

Timer adjustment

Pump speed r/min 1300

Advance angle deg. 0.5

Timer adjustment_02

Pump speed r/min 1600

Advance angle deg. 2 1.5 2.5

Timer adjustment_03

Pump speed r/min 1800

Advance angle deg. 4.5 4 5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=C03
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt set position 'H' (2)Use the hole at R = aa
----------
aa=32mm
----------
a=58deg+-5deg b=36deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)At the ball joint above R = aa.
----------
aa=12mm
----------
a=29deg+-5deg b=10deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (position of gear's 'M' mark) (3)B.T.D.C.: aa (4)-
----------
aa=13.9deg
----------
a=(50deg)