Rating:
Information injection-pump assembly
BOSCH
F 019 Z10 947
f019z10947
ZEXEL
101405-3350
1014053350
KOMATSU
4063968
4063968
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
OCTOT Fuel Injection Pump 4063968 101041-9260 F01G003009 Fits For Komatsu PC160LC-4KA PC160LC-4KA Engine SAA4D102 Fits For Hyundai Excavator R140LC-7 R140W-7
OCTOT Part Name: Fuel Injection Pump || Part Number: 4063968 101041-9260 F01G003009 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: SAA4D102 || Applicable: Fits For Hyundai Excavator R140LC-7 R140W-7 || Fits For Komatsu Excavator PC160LC-4KA PC160LC-4KA Engine SAA4D102
OCTOT Part Name: Fuel Injection Pump || Part Number: 4063968 101041-9260 F01G003009 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: SAA4D102 || Applicable: Fits For Hyundai Excavator R140LC-7 R140W-7 || Fits For Komatsu Excavator PC160LC-4KA PC160LC-4KA Engine SAA4D102
Haiyazhma Fuel Injection Pump 4063968 101041-9260 F01G003009 Compatible with Komatsu PC160LC-4KA PC160LC-4KA Engine SAA4D102 Compatible with Hyundai Excavator R140LC-7 R140W-7
Haiyazhma Part Name: Fuel Injection Pump || Part Number: 4063968 101041-9260 F01G003009 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: SAA4D102 || Applicable: Compatible with Hyundai Excavator R140LC-7 R140W-7 || Compatible with Komatsu Excavator PC160LC-4KA PC160LC-4KA Engine SAA4D102
Haiyazhma Part Name: Fuel Injection Pump || Part Number: 4063968 101041-9260 F01G003009 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: SAA4D102 || Applicable: Compatible with Hyundai Excavator R140LC-7 R140W-7 || Compatible with Komatsu Excavator PC160LC-4KA PC160LC-4KA Engine SAA4D102
BCXFORK Fuel Injection Pump 101405-3350 101041-9260 for Komatsu Engine SAA4D102
BCXFORK NOTE Before placing an order, please verify that your part number matches the one in the listing. Some fuel injection pump may look similar. If you're unsure, you can leave us a message and provide a picture of your old fuel injection pump for verification. || Package Include: 1 x Fuel Injection Pump || Part Number: 101405-3350, 1014053350, 101041-9260, 1010419260, F-019-Z10-947, F019Z10947, F01G003009, F 019 Z10 947, 6737711510 || This item fits for Komatsu Engine SAA4D102
BCXFORK NOTE Before placing an order, please verify that your part number matches the one in the listing. Some fuel injection pump may look similar. If you're unsure, you can leave us a message and provide a picture of your old fuel injection pump for verification. || Package Include: 1 x Fuel Injection Pump || Part Number: 101405-3350, 1014053350, 101041-9260, 1010419260, F-019-Z10-947, F019Z10947, F01G003009, F 019 Z10 947, 6737711510 || This item fits for Komatsu Engine SAA4D102
Service parts 101405-3350 INJECTION-PUMP ASSEMBLY:
1.
_
5.
AUTOM. ADVANCE MECHANIS
6.
COUPLING PLATE
7.
COUPLING PLATE
8.
_
9.
_
11.
Nozzle and Holder
12.
Open Pre:MPa(Kqf/cm2)
22.0{224}
15.
NOZZLE SET
Cross reference number
BOSCH
F 019 Z10 947
f019z10947
ZEXEL
101405-3350
1014053350
KOMATSU
4063968
4063968
Zexel num
Bosch num
Firm num
Name
101405-3350
F 019 Z10 947
4063968 KOMATSU
INJECTION-PUMP ASSEMBLY
SAA4D102 K 14BC INJECTION PUMP ASSY PE4A,5A, PE
SAA4D102 K 14BC INJECTION PUMP ASSY PE4A,5A, PE
101405-3350
F 019 Z10 947
6737711510 KOMATSU
INJECTION-PUMP ASSEMBLY
SAA4D102 K 14BC INJECTION PUMP ASSY PE4A,5A, PE
SAA4D102 K 14BC INJECTION PUMP ASSY PE4A,5A, PE
Calibration Data:
Adjustment conditions
Test oil
1404 Test oil ISO4113 or {SAEJ967d}
1404 Test oil ISO4113 or {SAEJ967d}
Test oil temperature
degC
40
40
45
Nozzle and nozzle holder
105780-8140
Bosch type code
EF8511/9A
Nozzle
105780-0000
Bosch type code
DN12SD12T
Nozzle holder
105780-2080
Bosch type code
EF8511/9
Opening pressure
MPa
17.2
Opening pressure
kgf/cm2
175
Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600
Outer diameter - inner diameter - length (mm) mm 6-2-600
Overflow valve
131424-3420
Overflow valve opening pressure
kPa
255
221
289
Overflow valve opening pressure
kgf/cm2
2.6
2.25
2.95
Tester oil delivery pressure
kPa
255
255
255
Tester oil delivery pressure
kgf/cm2
2.6
2.6
2.6
Direction of rotation (viewed from drive side)
Right R
Right R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right R
Right R
Injection order
1-3-4-2
Pre-stroke
mm
2.7
2.65
2.75
Beginning of injection position
Drive side NO.1
Drive side NO.1
Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5
Cal 1-3 deg. 90 89.5 90.5
Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5
Cal 1-4 deg. 180 179.5 180.5
Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5
Cyl.1-2 deg. 270 269.5 270.5
Injection quantity adjustment
Adjusting point
A
Rack position
10.4
Pump speed
r/min
1100
1100
1100
Average injection quantity
mm3/st.
117.5
116.5
118.5
Max. variation between cylinders
%
0
-2.5
2.5
Basic
*
Fixing the lever
*
Boost pressure
kPa
66.7
66.7
Boost pressure
mmHg
500
500
Hydraulic cylinder ON
*
Injection quantity adjustment_02
Adjusting point
-
Rack position
6.4+-0.5
Pump speed
r/min
525
525
525
Average injection quantity
mm3/st.
10
9
11
Max. variation between cylinders
%
0
-15
15
Fixing the rack
*
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Hydraulic cylinder ON
*
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
Adjust only variation between cylinders; adjust governor according to governor specifications.
Injection quantity adjustment_03
Adjusting point
E
Rack position
10.8++
Pump speed
r/min
100
100
100
Average injection quantity
mm3/st.
90
85
95
Fixing the lever
*
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Hydraulic cylinder OFF
*
Rack limit
*
Boost compensator adjustment
Pump speed
r/min
850
850
850
Rack position
(8.5)
Boost pressure
kPa
21.3
18.6
24
Boost pressure
mmHg
160
140
180
Boost compensator adjustment_02
Pump speed
r/min
850
850
850
Rack position
R1(10.4)
Boost pressure
kPa
53.3
53.3
53.3
Boost pressure
mmHg
400
400
400
Test data Ex:
Governor adjustment
N:Pump speed
R:Rack position (mm)
(1)Target notch: K
(2)Tolerance for racks not indicated: +-0.05mm.
(3)Adjust the secondary timing before adjusting the governor.
(4)RACK LIMIT (When hydraulic cylinder is OFF)
(5)Boost compensator stroke: BCL
(6)Rack difference between N = N1 and N = N2
(7)When hydraulic cylinder ON: P1
----------
K=13 BCL=(1.9)mm N1=1100r/min N2=400r/min P1=127+-10kPa(1.3+-0.1kgf/cm2)
----------
----------
K=13 BCL=(1.9)mm N1=1100r/min N2=400r/min P1=127+-10kPa(1.3+-0.1kgf/cm2)
----------
Speed control lever angle
F:Full speed
I:Idle
(1)Use the hole at R = aa
(2)Stopper bolt setting
----------
aa=80mm
----------
a=11deg+-5deg b=31deg+-5deg
----------
aa=80mm
----------
a=11deg+-5deg b=31deg+-5deg
Stop lever angle
N:Pump normal
S:Stop the pump.
(1)No return spring
----------
----------
a=0deg+-5deg b=53deg+-5deg
----------
----------
a=0deg+-5deg b=53deg+-5deg
0000001501 TAMPER PROOF
Tamperproofing-equipped boost compensator cover installation procedure
(1)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads.
(Tightening torque T = T1 maximum)
(2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads.
(Tightening torque T = T2)
(3)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads.
(Tightening torque T = T3)
----------
T1=7.16~9.12N-m(0.73~0.93kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m) T3=2.9~4.4N-m(0.3~0.45kgf-m)
----------
----------
T1=7.16~9.12N-m(0.73~0.93kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m) T3=2.9~4.4N-m(0.3~0.45kgf-m)
----------
Timing setting
(1)Pump vertical direction
(2)Key groove position at No. 1 cylinder's beginning of injection position (at BTDC: aa).
(3)Position of the key groove of the No. 1 cylinder at B.T.D.C. bb (fix the governor flyweight at this position for delivery).
(4)B.T.D.C.: aa
(5)At second timing adjustment, set the camshaft at the * position and tighten the flyweight locknut.
(6)Align the flyweight's timing gear position with the lockpin groove and then fully tighten the flyweight to the camshaft.
(7)Remove the lock pin and adjust the governor. Reinstall the lock pin to fix the flyweight for delivery.
----------
aa=11deg bb=0deg
----------
a=55deg48min+-3deg b=5deg30min+-30min
----------
aa=11deg bb=0deg
----------
a=55deg48min+-3deg b=5deg30min+-30min
Have questions with 101405-3350?
Group cross 101405-3350 ZEXEL
Komatsu
Komatsu
Komatsu
101405-3350
F 019 Z10 947
4063968
INJECTION-PUMP ASSEMBLY
SAA4D102
SAA4D102
101405-3350
F 019 Z10 947
6737711510
INJECTION-PUMP ASSEMBLY
SAA4D102
SAA4D102