Buy 101405-3321 ZEXEL F 01G 003 004 BOSCH INJECTION-PUMP ASSEMBLY f01g003004 1014053321 4063493

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101405-3321 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 003 004 f01g003004

ZEXEL 101405-3321 1014053321

KOMATSU 4063493 4063493

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Kilen Suplex Coil Spring Front Axle 20065

$57.24

25 Oct 2024
0.2752[0.12] pounds
LU: Amazon Global Store

Kilen Suplex Coil Spring Front Axle 20065
Kilen Spring Design: Coil Spring; Coil Spring; Coil Spring; Coil Spring || Quality Product || Brand New

Agility Auto Parts 4063493 Fuel Tank Filler Neck (Use Garage Tool to Check Correct Compatibility)

$48.63

25 Oct 2024

Amazon.com

Agility Auto Parts 4063493 Fuel Tank Filler Neck (Use Garage Tool to Check Correct Compatibility)
AGILITY AUTO PARTS Inc. Threaded Attachment Method || Material - Metal || Color - Black || Vent Quantity - 1 || No - Bracket, Clamps, Hoses, Hardware Included

Service parts 101405-3321 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101041-9260

3. GOVERNOR 105404-6100

4. SUPPLY PUMP

105220-5960

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105158-5002

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 22.0{224}

13. NOZZLE-HOLDER 105088-2002

14. NOZZLE

105017-2910

15. NOZZLE SET

Include in #1:

101405-3321 as INJECTION-PUMP ASSEMBLY

106681-4401 as _

Cross reference number

BOSCH F 01G 003 004 f01g003004

ZEXEL 101405-3321 1014053321

KOMATSU 4063493 4063493

Zexel num

Bosch num

Firm num

Name

101405-3321

F 01G 003 004

4063493 KOMATSU

INJECTION-PUMP ASSEMBLY
SAA4D102 K 14BC INJECTION PUMP ASSY PE4A,5A, PE

101405-3321

F 01G 003 004

6737711210 KOMATSU

INJECTION-PUMP ASSEMBLY
SAA4D102 K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-3420

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 255 255 255

Tester oil delivery pressure kgf/cm2 2.6 2.6 2.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 2.7 2.65 2.75

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point A

Rack position 10.4

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 117.5 116.5 118.5

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the lever *

Boost pressure kPa 66.7 66.7

Boost pressure mmHg 500 500

Hydraulic cylinder ON *

Injection quantity adjustment_02

Adjusting point -

Rack position 6.4+-0.5

Pump speed r/min 525 525 525

Average injection quantity mm3/st. 10 9 11

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Hydraulic cylinder ON *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Injection quantity adjustment_03

Adjusting point E

Rack position 10.8++

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 90 85 95

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Hydraulic cylinder OFF *

Rack limit *

Boost compensator adjustment

Pump speed r/min 850 850 850

Rack position (8.5)

Boost pressure kPa 21.3 18.6 24

Boost pressure mmHg 160 140 180

Boost compensator adjustment_02

Pump speed r/min 850 850 850

Rack position R1(10.4)

Boost pressure kPa 53.3 53.3 53.3

Boost pressure mmHg 400 400 400

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Adjust the secondary timing before adjusting the governor. (4)RACK LIMIT (When hydraulic cylinder is OFF) (5)Boost compensator stroke: BCL (6)When hydraulic cylinder ON: P1 (7)Rack difference between N = N1 and N = N2
----------
K=13 BCL=(1.9)mm P1=127+-10kPa(1.3+-0.1kgf/cm2) N1=1100r/min N2=400r/min
----------

Speed control lever angle

F:Full speed I:Idle S:Stop (1)Use the hole at R = aa (2)Rack position = bb, speed = cc (3)Stopper bolt setting
----------
aa=80mm bb=2-0.5mm cc=0r/min
----------
a=11deg+-5deg b=31deg+-3deg c=31deg+-5deg

0000001501 TAMPER PROOF

Tamperproofing-equipped boost compensator cover installation procedure (1)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T1 maximum) (2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T2) (3)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T3)
----------
T1=7.16~9.12N-m(0.73~0.93kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m) T3=2.9~4.4N-m(0.3~0.45kgf-m)
----------

Timing setting

(1)Pump vertical direction (2)Key groove position at No. 1 cylinder's beginning of injection position (at BTDC: aa). (3)Position of the key groove of the No. 1 cylinder at B.T.D.C. bb (fix the governor flyweight at this position for delivery). (4)B.T.D.C.: aa (5)At second timing adjustment, set the camshaft at the * position and tighten the flyweight locknut. (6)Align the flyweight's timing gear position with the lockpin groove and then fully tighten the flyweight to the camshaft. (7)Remove the lock pin and adjust the governor. Reinstall the lock pin to fix the flyweight for delivery.
----------
aa=11deg bb=0deg
----------
a=55deg48min+-3deg b=5deg30min+-30min