101322-0170 ZEXEL F 019 Z10 149 BOSCH INJECTION-PUMP ASSEMBLY f019z10149 1013220170 5156006463


101322-0170 INJECTION-PUMP ASSEMBLY
Rating:
52
Buy INJECTION-PUMP ASSEMBLY 101322-0170 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z10 149 f019z10149
ZEXEL 101322-0170 1013220170
ISUZU 5156006463 5156006463

Service parts 101322-0170 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101032-9041
3. GOVERNOR 105410-3220
4. SUPPLY PUMP 105220-4212
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156635-0320
8. _
9. _
10. NOZZLE AND HOLDER ASSY
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105081-3030
14. NOZZLE 105000-1080
15. NOZZLE SET

Include in #1:

101322-0170 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 019 Z10 149 f019z10149
ZEXEL 101322-0170 1013220170
ISUZU 5156006463 5156006463


Zexel num
Bosch num
Firm num
Name
101322-0170 
F 019 Z10 149 
5156006463  ISUZU
INJECTION-PUMP ASSEMBLY
3AD1 * K 14BA PE1A,2A,3A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-3-2
Pre-stroke mm   1.75 1.7 1.8
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 2
Cyl.1-2
deg.   240 239.5 240.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.5
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   31.9 30.9 32.9
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   7.2+-0.5
Pump speed r/min   385 385 385
Average injection quantity mm3/st.   8 7 9
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 101322-0170
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK CAP: R1
----------
K=10 R1=(17.5)mm
----------

Speed control lever angle

Test data 101322-0170
F:Full speed I:Idle S:Stop
----------

----------
a=8deg+-5deg b=27deg+-5deg c=32deg+-3deg




Have questions with 101322-0170?





Group cross 101322-0170 ZEXEL

Isuzu 

 
5156004923 
INJECTION-PUMP ASSEMBLY
3AA1
F 019 Z10 147 
5156004853 
INJECTION-PUMP ASSEMBLY
3AA1
 
5156004863 
INJECTION-PUMP ASSEMBLY
3AA1
 
5156005662 
INJECTION-PUMP ASSEMBLY
3AA1
9 400 610 339 
5156004873 
INJECTION-PUMP ASSEMBLY
3AA1
 
5156006443 
INJECTION-PUMP ASSEMBLY
3AD1
F 019 Z10 148 
5156006454 
INJECTION-PUMP ASSEMBLY
3AD1
101322-0170  
F 019 Z10 149 
5156006463 
INJECTION-PUMP ASSEMBLY
3AD1
 
5156006474 
INJECTION-PUMP ASSEMBLY
3AD1
9 400 610 125 
5156006483 
INJECTION-PUMP ASSEMBLY
3AD1
Back to top