106873-7901 ZEXEL F 019 Z20 294 BOSCH INJECTION-PUMP ASSEMBLY f019z20294 1068737901 me442587


106873-7901 INJECTION-PUMP ASSEMBLY
Rating:
44
Buy INJECTION-PUMP ASSEMBLY 106873-7901 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z20 294 f019z20294
ZEXEL 106873-7901 1068737901
MITSUBISHI ME442587 me442587

Cross reference number

BOSCH F 019 Z20 294 f019z20294
ZEXEL 106873-7901 1068737901
MITSUBISHI ME442587 me442587


Zexel num
Bosch num
Firm num
Name
106873-7901 
F 019 Z20 294 
ME442587  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC9T K 14CD INJECTION PUMP ASSY PE8P PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-7-3- 4-5-6-8
Pre-stroke mm   3.9 3.85 3.95
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-3
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-5
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cal 1-8
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.3
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   132 129 135
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   61.3 61.3
Boost pressure mmHg   460 460
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.8+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   25 22.4 27.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   R1-0.7
Boost pressure kPa   34.7 33.4 36
Boost pressure mmHg   260 250 270
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   R1(10.3)
Boost pressure kPa   48 41.3 54.7
Boost pressure mmHg   360 310 410
Timer adjustment
Pump speed r/min   900++
Advance angle deg.   0 0 0
Remarks
Do not advance until starting N = 900.
 
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   1 1 1
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106873-7901
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)The torque control spring does not operate. (4)At excess fuel lever operation (at boost pressure 0): L1 (5)Boost compensator stroke (6)Set idle sub-spring
----------
K=12 L1=12+-0.1mm
----------

Speed control lever angle

Test data 106873-7901
F:Full speed I:Idle (1)Set the pump speed at aa. ( At delivery ) (2)Set the pump speed at bb. (3)Stopper bolt setting
----------
aa=910r/min bb=755r/min
----------
a=4deg+-5deg b=26deg+-5deg c=7deg+-5deg

Stop lever angle

Test data 106873-7901
N:Pump normal S:Stop the pump. (1)Right front (2)Right rear (3)Normal
----------

----------
a=19deg+-5deg b=46deg+-5deg c=28deg+-5deg d=53deg+-5deg

0000001101

Test data 106873-7901
N:Normal B:When boosted (1)Rack position = aa (point D) at boost pressure 0.
----------
aa=12+-0.1mm
----------
a=(10deg) b=(13deg)

Timing setting

Test data 106873-7901
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(40deg)




Have questions with 106873-7901?





Group cross 106873-7901 ZEXEL

Mitsubishi 

9 400 613 399 
ME098771 
INJECTION-PUMP ASSEMBLY
8DC9TC
106873-7901  
F 019 Z20 294 
ME442587 
INJECTION-PUMP ASSEMBLY
8DC9T
9 400 618 524 
ME094964 
INJECTION-PUMP ASSEMBLY
8DC92
9 400 618 525 
ME095026 
INJECTION-PUMP ASSEMBLY
8DC92
9 400 618 526 
ME095027 
INJECTION-PUMP ASSEMBLY
8DC91
9 400 618 527 
ME095073 
INJECTION-PUMP ASSEMBLY
8DC9T2
9 400 611 548 
ME095074 
INJECTION-PUMP ASSEMBLY
8DC9T2
9 400 619 813 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 528 
ME095075 
INJECTION-PUMP ASSEMBLY
8DC9T7
9 400 611 549 
ME095028 
INJECTION-PUMP ASSEMBLY
8DC9T2
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 529 
ME163602 
INJECTION-PUMP ASSEMBLY
8M20
9 400 618 530 
ME098773 
INJECTION-PUMP ASSEMBLY
8DC9TC
Back to top