106873-3354 ZEXEL F 01G 09U 0B5 BOSCH INJECTION-PUMP ASSEMBLY f01g09u0b5 1068733354 220008653a


106873-3354 INJECTION-PUMP ASSEMBLY
Rating:
63
Buy INJECTION-PUMP ASSEMBLY 106873-3354 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 09U 0B5 f01g09u0b5
ZEXEL 106873-3354 1068733354
HINO 220008653A 220008653a

Service parts 106873-3354 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106080-5762
3. GOVERNOR 105952-1280
4. SUPPLY PUMP 105237-0080
5. AUTOM. ADVANCE MECHANIS 105683-0430
6. COUPLING PLATE 105664-2170
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-7802
11. Nozzle and Holder 23600-2750A
12. Open Pre:MPa(Kqf/cm2) 14.7{150}/21.6{220}
13. NOZZLE-HOLDER 105030-3591
14. NOZZLE
15. NOZZLE SET 105019-0550

Include in #1:

106873-3354 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 01G 09U 0B5 f01g09u0b5
ZEXEL 106873-3354 1068733354
HINO 220008653A 220008653a


Zexel num
Bosch num
Firm num
Name
106873-3354 
106873-3355 
F 01G 09U 0B5 
220008653A  HINO
INJECTION-PUMP ASSEMBLY
F-3 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8250
Bosch type code   1 688 901 101
Nozzle   105780-0120
Bosch type code   1 688 901 990
Nozzle holder   105780-2190
Opening pressure MPa   20.7
Opening pressure kgf/cm2   211
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-4120
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
RED3 control unit part number   407910-3 960
RED3 rack sensor specifications mm   19
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-8-6-2- 7-5-4-3
Pre-stroke mm   4 3.94 4
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-8
deg.   45 44.75 45.25
Difference between angles 2
Cal 1-6
deg.   90 89.75 90.25
Difference between angles 3
Cyl.1-2
deg.   135 134.75 135.25
Difference between angles 4
Cal 1-7
deg.   180 179.75 180.25
Difference between angles 5
Cal 1-5
deg.   225 224.75 225.25
Difference between angles 6
Cal 1-4
deg.   270 269.75 270.25
Difference between angles 7
Cal 1-3
deg.   315 314.75 315.25
Injection quantity adjustment
Rack position   (13.3)
Vist V   1.85 1.85 1.85
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   134.5 132.5 136.5
Max. variation between cylinders %   0 -3 3
Basic   *
Injection quantity adjustment_02
Rack position   (8.4)
Vist V   2.6 2.5 2.7
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   16.9 13.9 19.9
Max. variation between cylinders %   0 -10 10
Governor adjustment
Pump speed r/min   710--
Advance angle deg.   0 0 0
Load   2/5
Remarks
Q = 80.3 (mm3/st) / N = 700(r/min), beginning of effect
 
Governor adjustment_02
Pump speed r/min   660
Advance angle deg.   0.3
Load   2/5
Remarks
Q=80.3(mm3/st)/N=700(r/min)
 
Governor adjustment_03
Pump speed r/min   (760)
Advance angle deg.   2 1.7 2.3
Load   5/5
Remarks
Q = 159.5 (mm3/st) / N = 1100 (r/min), measure speed
 
Governor adjustment_04
Pump speed r/min   900+50
Advance angle deg.   2 1.7 2.3
Load   4/5
Remarks
Q=147(mm3/st)/N=900 (r/min)
 
Governor adjustment_05
Pump speed r/min   1100-50
Advance angle deg.   5.75 5.45 6.05
Load   5/5
Remarks
Q = 159.5 (mm3/st) / N = 1100 (r/min), end of effect
 

Test data Ex:

Speed control lever angle

Test data 106873-3354
N:Pump normal S:Stop the pump. (1)Rack position = aa (2)Rack position bb
----------
aa=20mm bb=1mm
----------
a=37deg+-5deg b=2.5deg+-5deg

0000000901

Test data 106873-3354
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(80deg)

Stop lever angle

Test data 106873-3354
(Rs) rack sensor specifications (C/U) control unit part number (V) Rack sensor output voltage (R) Rack position (mm) 1. Confirming governor output characteristics (rack 19 mm, span 6 mm) (1)When the output voltages of the rack sensor are V1 and V2, check that the rack positions R1 and R2 in the table above are satisfied.
----------

----------




Have questions with 106873-3354?





Group cross 106873-3354 ZEXEL

Hino 

 
220008650A 
INJECTION-PUMP ASSEMBLY
F-3
 
220008651A 
INJECTION-PUMP ASSEMBLY
F-3
F 01G 09U 0B4 
 
INJECTION-PUMP ASSEMBLY

Hino 

 
220008652A 
INJECTION-PUMP ASSEMBLY
F-3
106873-3354  

106873-3355 
F 01G 09U 0B5 
220008653A 
INJECTION-PUMP ASSEMBLY
F-3
9 400 618 433 
220008653B 
INJECTION-PUMP ASSEMBLY
F-3
Back to top