106871-4162 ZEXEL F 019 Z20 235 BOSCH INJECTION-PUMP ASSEMBLY f019z20235 1068714162


106871-4162 INJECTION-PUMP ASSEMBLY
Rating:
67
Buy INJECTION-PUMP ASSEMBLY 106871-4162 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z20 235 f019z20235
ZEXEL 106871-4162 1068714162

Service parts 106871-4162 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106080-5930
3. GOVERNOR 105489-4810
4. SUPPLY PUMP 105237-4400
5. AUTOM. ADVANCE MECHANIS 105636-2250
6. COUPLING PLATE 105662-1360
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2)
13. NOZZLE-HOLDER
14. NOZZLE
15. NOZZLE SET

Include in #1:

106871-4162 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 019 Z20 235 f019z20235
ZEXEL 106871-4162 1068714162


Zexel num
Bosch num
Firm num
Name
106871-4162 
F 019 Z20 235 
  DPICO
INJECTION-PUMP ASSEMBLY
EF750 Q

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105870-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-0820
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-8-6-2- 7-5-4-3
Pre-stroke mm   4.4 4.34 4.4
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-8
deg.   45 44.75 45.25
Difference between angles 2
Cal 1-6
deg.   90 89.75 90.25
Difference between angles 3
Cyl.1-2
deg.   135 134.75 135.25
Difference between angles 4
Cal 1-7
deg.   180 179.75 180.25
Difference between angles 5
Cal 1-5
deg.   225 224.75 225.25
Difference between angles 6
Cal 1-4
deg.   270 269.75 270.25
Difference between angles 7
Cal 1-3
deg.   315 314.75 315.25
Injection quantity adjustment
Adjusting point   A
Rack position   9.5
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   120 117 123
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   9.6
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   121.8 119.8 123.8
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   10.4
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   145 142 148
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   5.4+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   11.5 8.5 14.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_05
Adjusting point   E
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   140 140 160
Fixing the lever   *
Remarks
After startup boost setting
 
Injection quantity adjustment_06
Adjusting point   F
Rack position   9.4+-0.5
Pump speed r/min   1175 1175 1175
Average injection quantity mm3/st.   126 121 131
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Timer adjustment
Pump speed r/min   850
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   1000
Advance angle deg.   1.7 1.2 2.2
Timer adjustment_03
Pump speed r/min   1100
Advance angle deg.   3.5 3.2 3.8
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106871-4162
N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Tolerance for racks not indicated: +-0.05mm. (4)Excess fuel setting for starting: SXL (N = N1) (5)Damper spring setting
----------
RT=0.8 TH=2.6mm SXL=10.5+0.2mm N1=350r/min
----------

Speed control lever angle

Test data 106871-4162
F:Full speed
----------

----------
a=20deg+-5deg

0000000901

Test data 106871-4162
F:Full load I:Idle (1)Use the hole at R = aa (2)Stopper bolt setting
----------
aa=50mm
----------
a=39deg+-5deg b=39deg+-3deg

Stop lever angle

Test data 106871-4162
N:Pump normal S:Stop the pump. (1)Drive side
----------

----------
a=30deg+-5deg b=64deg+-5deg

Timing setting

Test data 106871-4162
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(80deg)




Have questions with 106871-4162?





Group cross 106871-4162 ZEXEL

Dpico 

F 019 Z10 545 
 
INJECTION-PUMP ASSEMBLY
8DC9
9 400 619 526 
 
INJECTION-PUMP ASSEMBLY

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
EF750
F 019 Z20 232 
 
INJECTION-PUMP ASSEMBLY
EF750
 
 
INJECTION-PUMP ASSEMBLY
9 400 619 561 
 
INJECTION-PUMP ASSEMBLY

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
EF750
F 019 Z20 233 
 
INJECTION-PUMP ASSEMBLY
EF750
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
EF750
F 019 Z20 234 
 
INJECTION-PUMP ASSEMBLY
EF750
 
 

Dpico 

9 400 619 610 
 
INJECTION-PUMP ASSEMBLY
F17F
 
 
INJECTION-PUMP ASSEMBLY

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
EF750
106871-4162  
F 019 Z20 235 
 
INJECTION-PUMP ASSEMBLY
EF750
9 400 619 668 
 
INJECTION-PUMP ASSEMBLY

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
F20C
F 019 Z20 236 
 
INJECTION-PUMP ASSEMBLY
F20C
 
 
INJECTION-PUMP ASSEMBLY
F17F
 
 
INJECTION-PUMP ASSEMBLY
F17E
 
 
INJECTION-PUMP ASSEMBLY
F17E
F 019 Z20 237 
 
INJECTION-PUMP ASSEMBLY
F17E
Back to top