106861-2140 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1068612140 me069052


106861-2140 INJECTION-PUMP ASSEMBLY
Rating:
24
Buy INJECTION-PUMP ASSEMBLY 106861-2140 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106861-2140 1068612140
MITSUBISHI ME069052 me069052

Cross reference number

ZEXEL 106861-2140 1068612140
MITSUBISHI ME069052 me069052


Zexel num
Bosch num
Firm num
Name
106861-2140 
106861-2141 
 
ME069052  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC90PT *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-7-3- 4-5-6-8
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-3
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-5
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cal 1-8
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   A
Rack position   11
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   136.3 133.3 139.3
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   10.4
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   124 120 128
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   5.3+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   18.5 15.9 21.1
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Timer adjustment
Pump speed r/min   900--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   850
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   900
Advance angle deg.   0.8
Timer adjustment_04
Pump speed r/min   -
Advance angle deg.   3 2.5 3.5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106861-2140
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT (3)Setting at shipping (4)Idle sub spring setting: L1.
----------
K=10 L1=5-0.5mm
----------

Speed control lever angle

Test data 106861-2140
F:Full speed I:Idle (1)At shipping (2)Stopper bolt setting
----------

----------
a=3deg+-5deg b=27deg+-5deg c=(2deg)

Stop lever angle

Test data 106861-2140
N:Pump normal S:Stop the pump.
----------

----------
a=19deg+-5deg b=46deg+-5deg

Timing setting

Test data 106861-2140
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(40deg)




Have questions with 106861-2140?





Group cross 106861-2140 ZEXEL

Mitsubishi 

 
 
INJECTION-PUMP ASSEMBLY
8DC9T
 
ME066601 
INJECTION-PUMP ASSEMBLY
8DC9T
 
 
INJECTION-PUMP ASSEMBLY
8DC9T
 
ME066615 
INJECTION-PUMP ASSEMBLY
8DC9T
 
 
INJECTION-PUMP ASSEMBLY
8DC9T
 
ME066616 
INJECTION-PUMP ASSEMBLY
8DC9T
 
ME069053 
INJECTION-PUMP ASSEMBLY
8DC90CT
9 400 617 970 
ME098502 
INJECTION-PUMP ASSEMBLY
8DC90CT
106861-2140  

106861-2141 
 
ME069052 
INJECTION-PUMP ASSEMBLY
8DC90PT
9 400 610 131 
ME098501 
INJECTION-PUMP ASSEMBLY
8DC90PT
 
ME069054 
INJECTION-PUMP ASSEMBLY
8DC90CT
 
 
INJECTION-PUMP ASSEMBLY
8DC90CT
9 400 617 971 
ME098503 
INJECTION-PUMP ASSEMBLY
8DC90CT
 
 
INJECTION-PUMP ASSEMBLY
8DC9T5
9 400 617 972 
ME066694 
INJECTION-PUMP ASSEMBLY
8DC9T5
9 400 617 973 
ME068083 
INJECTION-PUMP ASSEMBLY
8DC9T
 
 
INJECTION-PUMP ASSEMBLY
8DC9T
 
ME066655 
INJECTION-PUMP ASSEMBLY
8DC9T
 
 
INJECTION-PUMP ASSEMBLY
8DC9T0
F 019 Z20 496 
ME066793 
INJECTION-PUMP ASSEMBLY
8DC9T0
Back to top