106861-2131 ZEXEL 9 400 617 970 BOSCH INJECTION-PUMP ASSEMBLY 9400617970 1068612131 me098502

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106861-2131 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 970 9400617970

ZEXEL 106861-2131 1068612131

MITSUBISHI ME098502 me098502

Service parts 106861-2131 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106086-5450

3. GOVERNOR 105408-0320

4. SUPPLY PUMP 105237-1320

5. AUTOM. ADVANCE MECHANIS 105636-0620

6. COUPLING PLATE 105663-0260

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-4972

11. Nozzle and Holder ME066034

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105030-4990

14. NOZZLE

105015-4580

15. NOZZLE SET

Include in #1:

106861-2131 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 970 9400617970

ZEXEL 106861-2131 1068612131

MITSUBISHI ME098502 me098502

Zexel num

Bosch num

Firm num

Name

106861-2131

9 400 617 970

ME098502 MITSUBISHI

INJECTION-PUMP ASSEMBLY
8DC90CT K 14CD INJECTION PUMP ASSY PE8P PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-4620

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-2-7-3- 4-5-6-8

Pre-stroke mm 4.8 4.75 4.85

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cyl.1-2 deg. 45 44.5 45.5

Difference between angles 2
Cal 1-7 deg. 90 89.5 90.5

Difference between angles 3
Cal 1-3 deg. 135 134.5 135.5

Difference between angles 4
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 5
Cal 1-5 deg. 225 224.5 225.5

Difference between angles 6
Cal 1-6 deg. 270 269.5 270.5

Difference between angles 7
Cal 1-8 deg. 315 314.5 315.5

Injection quantity adjustment

Adjusting point A

Rack position 9.6

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 145.5 142.5 148.5

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 6.2+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 19.5 16.9 22.1

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Timer adjustment

Pump speed r/min 900--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 850

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 950

Advance angle deg. 0.8 0.3 1.3

Timer adjustment_04

Pump speed r/min 1100

Advance angle deg. 2 1.5 2.5

Timer adjustment_05

Pump speed r/min -

Advance angle deg. 3 2.5 3.5

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Deliver with the torque spring and the torque control spring not operating. (3)Rack limit (operating at delivery) (4)Main spring setting (5)Set idle sub-spring (6)Setting at shipping
----------
K=7
----------