104746-6605 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047466605 8971923304

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104746-6605 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104746-6605 1047466605

ISUZU 8971923304 8971923304

Cross reference number

ZEXEL 104746-6605 1047466605

ISUZU 8971923304 8971923304

Zexel num

Bosch num

Firm num

Name

104746-6605
104746-6606

8971923304 ISUZU

INJECTION-PUMP ASSEMBLY
4JB1-TC * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Left L

Timer measuring device installation position
Low pressure side LOW PRESSURE SIDE

Injection timing adjustment

Pump speed r/min 500 500 500

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 60.5 60 61

Difference in delivery mm3/st. 5

Basic *

Oil temperature degC 48 46 50

Remarks
NA

Injection timing adjustment_02

Pump speed r/min 800 800 800

Boost pressure kPa 52 50.7 53.3

Boost pressure mmHg 390 380 400

Average injection quantity mm3/st. 67.4 66.9 67.9

Difference in delivery mm3/st. 5.5

Basic *

Oil temperature degC 50 48 52

Remarks
CBS

Injection timing adjustment_03

Pump speed r/min 800 800 800

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 76.8 76.3 77.3

Difference in delivery mm3/st. 6

Basic *

Oil temperature degC 50 48 52

Remarks
Full

Injection timing adjustment_04

Pump speed r/min 500 500 500

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 60.5 59.5 61.5

Difference in delivery mm3/st. 5

Basic *

Oil temperature degC 48 46 50

Remarks
NA

Injection timing adjustment_05

Pump speed r/min 800 800 800

Boost pressure kPa 52 50.7 53.3

Boost pressure mmHg 390 380 400

Average injection quantity mm3/st. 67.4 66.4 68.4

Difference in delivery mm3/st. 5.5

Basic *

Oil temperature degC 50 48 52

Remarks
CBS

Injection timing adjustment_06

Pump speed r/min 800 800 800

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 76.8 75.8 77.8

Difference in delivery mm3/st. 6

Basic *

Oil temperature degC 50 48 52

Remarks
Full

Injection timing adjustment_07

Pump speed r/min 1000 1000 1000

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 83.8 77.3 90.3

Oil temperature degC 50 48 52

Injection timing adjustment_08

Pump speed r/min 1250 1250 1250

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 91.5 85 98

Oil temperature degC 50 48 52

Injection timing adjustment_09

Pump speed r/min 1700 1700 1700

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 105.7 99.2 112.2

Oil temperature degC 50 48 52

Injection quantity adjustment

Pump speed r/min 2075 2075 2075

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 34 31 37

Difference in delivery mm3/st. 7

Basic *

Oil temperature degC 52 50 54

Injection quantity adjustment_02

Pump speed r/min 2075 2075 2075

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 34 31 37

Difference in delivery mm3/st. 7

Basic *

Oil temperature degC 52 50 54

Injection quantity adjustment_03

Pump speed r/min 2300 2300 2300

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 3

Oil temperature degC 52 50 54

Governor adjustment

Pump speed r/min 375 375 375

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 13.9 11.9 15.9

Difference in delivery mm3/st. 2 2 2

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 375 375 375

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 13.9 11.9 15.9

Difference in delivery mm3/st. 2 2 2

Basic *

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 60 60 100

Basic *

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_02

Pump speed r/min 100 100 100

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 60 60 100

Oil temperature degC 48 46 50

Remarks
Full

Speed control lever angle

Pump speed r/min 375 375 375

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 1350 1350 1350

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Overflow quantity cm3/min 1240 1010 1470

Oil temperature degC 50 48 52

Stop lever angle

Pump speed r/min 1350 1350 1350

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Pressure kPa 471 442 500

Pressure kgf/cm2 4.8 4.5 5.1

Basic *

Oil temperature degC 50 48 52

Stop lever angle_02

Pump speed r/min 1020 1020 1020

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Pressure kPa 353 314 392

Pressure kgf/cm2 3.6 3.2 4

Oil temperature degC 50 48 52

Stop lever angle_03

Pump speed r/min 1250 1250 1250

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Pressure kPa 432 393 471

Pressure kgf/cm2 4.4 4 4.8

Oil temperature degC 50 48 52

Stop lever angle_04

Pump speed r/min 1350 1350 1350

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Pressure kPa 471 442 500

Pressure kgf/cm2 4.8 4.5 5.1

Basic *

Oil temperature degC 50 48 52

Stop lever angle_05

Pump speed r/min 1500 1500 1500

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Pressure kPa 510 471 549

Pressure kgf/cm2 5.2 4.8 5.6

Oil temperature degC 50 48 52

Stop lever angle_06

Pump speed r/min 1800 1800 1800

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Pressure kPa 608 569 647

Pressure kgf/cm2 6.2 5.8 6.6

Oil temperature degC 50 48 52

0000001101

Pump speed r/min 1350 1350 1350

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Timer stroke mm 1.8 1.6 2

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 1020 1020 1020

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Timer stroke mm 0.5

Oil temperature degC 50 48 52

_03

Pump speed r/min 1350 1350 1350

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Timer stroke mm 1.8 1.6 2

Basic *

Oil temperature degC 50 48 52

_04

Pump speed r/min 1500 1500 1500

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Timer stroke mm 3 2.6 3.4

Oil temperature degC 50 48 52

_05

Pump speed r/min 1800 1800 1800

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Timer stroke mm 4.5 4.2 4.9

Oil temperature degC 50 48 52

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

Timing setting

K dimension mm 3.6 3.5 3.7

KF dimension mm 7.76 7.66 7.86

MS dimension mm 0.5 0.4 0.6

BCS stroke mm 2.6 2.4 2.8

Pre-stroke mm 0.2 0.18 0.22

Control lever angle alpha deg. 18 14 22

Control lever angle beta deg. 39 34 44

Test data Ex:

0000001601 BOOST COMPENSATOR ADJUSTMENT

BCS adjustment procedure 1. At full boost pressure, set so that the full injection quantity is within the specifications (adjusting point). 2. Perform boost compensator intermediate operation point adjustment (pump speed N1, boost pressure P1). 3. When injection quantity at boost pressure P2 and pump speed N2 is not as specified, loosen nut (A) and adjust position of screw (B) so that injection quantity is as specified. The screw position should be within +-1 turn of initial position. 4. The nut tightening torque is T.
----------
N1=800r/min N2=500r/min P1=52.0kPa(390mmHg) P2=0kPa(0mmHg) T=6~9N-m(0.6~0.9kgf-m)
----------
SW=10mm T=6~9N-m(0.6~0.9kgf-m)

0000001801 POTENTIOMETER ADJUSTMENT

Potentiometer adjusting specifications (oval) N:Pump speed Q:Injection quantity P:Boost pressure V:Output voltage C/L: control lever position I:Idle F:Full lever position B:Adjusting point C:Checking point D:Bracket (shape may differ) Adjusting method (applied voltage Vi, dummy bolt method) 1. Hold the dummy bolt (A) against the control lever at position N = N1 and Q = Q1 and fix using the lock nut. 2. At potentiometer adjustment, with the control lever contacting the dummy bolt, adjust the potentiometer so that the output voltage is V1. 3. After completing adjustment, remove the dummy bolt (A) and confirm that the potentiometer output voltage is within the adjustment specifications when the control lever is in the idle position. (A): Dummy bolt and nut part number 146526-3300 (bolt) corresponding to 42 (mm). Corresponding to 013020-6040 (nut)
----------
N1=1080r/min Q1=27.5+-1.0mm3/st V1=3.56+-0.03V Vi=10V
----------
N1=1080r/min N2=375r/min P1=0kPa(0mmHg) Q1=27.5+-1.0mm3/st Q2=13.9+-2.0mm3/st V1=3.56+-0.03V V2=(0.93+-0.45V) V3=(7.43+-0.83V)