104746-1592 ZEXEL 9 460 610 950 BOSCH INJECTION-PUMP ASSEMBLY 9460610950 1047461592 8971195662


104746-1592 INJECTION-PUMP ASSEMBLY
Rating:
13
Buy INJECTION-PUMP ASSEMBLY 104746-1592 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 610 950 9460610950
ZEXEL 104746-1592 1047461592
ISUZU 8971195662 8971195662

Components :

0. INJECTION-PUMP ASSEMBLY 104746-1592
1. _
2. FUEL INJECTION PUMP 104646-1592
3. NUMBER PLATE 146966-9500
4. _ 146672-1720
5. CAPSULE
6. ADJUSTING DEVICE 146679-2022
7. NOZZLE AND HOLDER ASSY 105158-2311
8. Nozzle and Holder 8-97088-674-0
9. Open Pre:MPa(Kqf/cm2) 14.7{150}
10. NOZZLE-HOLDER 105088-1130
11. NOZZLE 105007-1271

Scheme ###:

1/6. [1] 146601-0700 PACKING RING
6. [1] 146100-0120 SUPPLY PUMP
9. [1] 146103-0000 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0320 DRIVE SHAFT
12/1. [1] 146200-0300 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-4120 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-0020 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146300-0400 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
33. [1] 146603-0700 SHIM
34. [1] 146302-3400 COMPRESSION SPRING
34B. [1] 146302-3300 COMPRESSION SPRING
34C. [1] 146302-3500 COMPRESSION SPRING
34D. [1] 146302-3600 COMPRESSION SPRING
35/1. [0] 146603-0700 SHIM D17.5&7.5T0.60
35/1. [0] 146603-0800 SHIM D17.5&7.5T0.70
35/1. [0] 146603-0900 SHIM D17.5&7.5T0.90
35/1. [0] 146603-1000 SHIM D17.5&7.5T1.00
35/1. [0] 146603-1100 SHIM D17.5&7.5T1.20
35/1. [0] 146603-3600 SHIM D17.5&7.5T2.40
36. [1] 146600-0800 O-RING
37. [1] 146310-0700 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [2] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [2] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [2] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [2] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [2] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [2] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [2] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [2] 146690-1400 SHIM D17&5.2T0.9
48/1. [2] 146690-1500 SHIM D17&5.2T1.1
48/1. [2] 146690-1600 SHIM D17&5.2T1.3
48/1. [2] 146690-1700 SHIM D17&5.2T1.4
48/1. [2] 146690-1800 SHIM D17&5.2T1.6
48/1. [2] 146690-1900 SHIM D17&5.2T1.7
48/1. [2] 146690-5800 SHIM
48/1. [2] 146690-5900 SHIM
48/1. [2] 146690-6000 SHIM
48/1. [2] 146690-6100 SHIM
48/1. [2] 146690-6200 SHIM
48/1. [2] 146690-6300 SHIM
48/1. [2] 146690-6400 SHIM
48/1. [2] 146690-6500 SHIM
48/1. [2] 146690-6600 SHIM
48/1. [2] 146690-6700 SHIM
48/1. [2] 146690-6800 SHIM
48/1. [2] 146690-6900 SHIM
48/1. [2] 146690-7000 SHIM
48/1. [2] 146690-7100 SHIM
48/1. [2] 146690-7200 SHIM
48/1. [2] 146690-7300 SHIM
48/1. [2] 146690-7400 SHIM
48/1. [2] 146690-7500 SHIM
48/1. [2] 146690-7800 SHIM
49. [2] 146234-0020 GUIDE PIN
50. [1] 146403-3720 HYDRAULIC HEAD
50. [1] 146403-3720 HYDRAULIC HEAD
50. [1] 146403-3720 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET
55. [4] 146430-0320 DELIVERY-VALVE ASSEMBLY VE4
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-0120 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
66. [1] 146600-0100 O-RING
67. [1] 146760-1920 MANIFOLD-PRESSURE COMP.
67/1. [1] 146805-7420 GOVERNOR COVER
67/13. [1] 013020-6040 UNION NUT
67/14. [1] 146621-1700 UNION NUT
67/15. [1] 146526-1800 BLEEDER SCREW
67/16. [1] 146526-3000 BLEEDER SCREW
67/23. [1] 146928-5500 BRACKET
67/24. [2] 139006-4500 BLEEDER SCREW
67/31. [1] 146710-0800 BUSHING
67/32. [1] 146711-0000 PLATE
67/33. [1] 139218-0400 UNION NUT
67/34. [1] 146712-0700 BEARING PIN
67/35. [1] 146621-0300 UNION NUT
67/36. [1] 146600-1400 O-RING
67/37. [1] 146710-0100 BUSHING
67/38. [1] 139506-0200 GASKET
67/39. [1] 146620-0300 CAPSULE
67/40. [1] 026512-1540 GASKET
67/41. [1] 146713-4100 ADJUSTING PIN
67/42. [2] 146714-0000 PLATE
67/43. [1] 146715-0000 DIAPHRAGM
67/44. [1] 139306-0100 LOCKING WASHER
67/45. [1] 013030-6040 UNION NUT
67/46. [1] 146716-0000 UNION NUT
67/47. [1] 146717-0300 COILED SPRING
67/48/1. [1] 146720-0000 SPACER BUSHING L3.7
67/48/1. [1] 146720-0100 SPACER BUSHING L3.9
67/48/1. [1] 146720-0200 SPACER BUSHING L4.1
67/48/1. [1] 146720-0300 SPACER BUSHING L4.3
67/48/1. [1] 146720-0400 SPACER BUSHING L4.5
67/48/1. [1] 146720-0500 SPACER BUSHING L4.7
67/48/1. [1] 146720-0600 SPACER BUSHING L4.9
67/48/1. [1] 146720-0700 SPACER BUSHING L5.1
67/48/1. [1] 146720-0800 SPACER BUSHING L5.3
67/48/1. [1] 146720-0900 SPACER BUSHING L2.7
67/48/1. [1] 146720-1000 SPACER BUSHING L2.9
67/48/1. [1] 146720-1100 SPACER BUSHING L3.1
67/48/1. [1] 146720-1200 SPACER BUSHING L3.3
67/48/1. [1] 146720-1300 SPACER BUSHING L3.5
67/48/1. [1] 146720-1400 SPACER BUSHING L2.8
67/48/1. [1] 146720-1500 SPACER BUSHING L3.0
67/48/1. [1] 146720-1600 SPACER BUSHING L3.2
67/48/1. [1] 146720-1700 SPACER BUSHING L3.4
67/48/1. [1] 146720-1800 SPACER BUSHING L3.6
67/48/1. [1] 146720-1900 SPACER BUSHING L3.8
67/48/1. [1] 146720-2000 SPACER BUSHING L4.0
67/48/1. [1] 146720-2100 SPACER BUSHING L4.2
67/48/1. [1] 146720-2200 SPACER BUSHING L4.4
67/48/1. [1] 146720-2300 SPACER BUSHING L4.6
67/48/1. [1] 146720-2400 SPACER BUSHING L4.8
67/48/1. [1] 146720-2500 SPACER BUSHING L5.0
67/48/1. [1] 146720-2600 SPACER BUSHING L5.2
67/48/1. [1] 146720-2700 SPACER BUSHING L5.4
67/48/1. [1] 146720-2800 SPACER BUSHING L5.5
67/48/1. [1] 146720-2900 SPACER BUSHING L5.6
67/48/1. [1] 146720-4500 SPACER BUSHING L1.8
67/48/1. [1] 146720-4600 SPACER BUSHING L1.9
67/48/1. [1] 146720-4700 SPACER BUSHING L2.0
67/48/1. [1] 146720-4800 SPACER BUSHING L2.1
67/48/1. [1] 146720-4900 SPACER BUSHING L2.2
67/48/1. [1] 146720-5000 SPACER BUSHING L2.3
67/48/1. [1] 146720-5100 SPACER BUSHING L2.4
67/48/1. [1] 146720-5200 SPACER BUSHING L2.5
67/48/1. [1] 146720-5300 SPACER BUSHING L2.6
67/48/1. [1] 146725-2500 SPACER BUSHING L5.7
67/48/1. [1] 146725-2600 SPACER BUSHING L5.8
67/48/1. [1] 146725-2700 SPACER BUSHING L5.9
67/48/1. [1] 146725-2800 SPACER BUSHING L6.0
67/48/1. [1] 146725-2900 SPACER BUSHING L6.1
67/48/1. [1] 146725-3000 SPACER BUSHING L6.2
67/48/1. [1] 146725-3100 SPACER BUSHING L6.3
67/48/1. [1] 146725-3200 SPACER BUSHING L6.4
67/48/1. [1] 146725-3300 SPACER BUSHING L6.5
67/48/1. [1] 146725-3400 SPACER BUSHING L6.6
67/48/1. [1] 146725-3500 SPACER BUSHING L6.7
67/48/1. [1] 146725-3600 SPACER BUSHING L6.8
67/48/1. [1] 146725-3700 SPACER BUSHING L6.9
67/48/1. [1] 146725-3800 SPACER BUSHING L7.0
67/48/1. [1] 146725-3900 SPACER BUSHING L7.1
67/48/1. [1] 146725-4000 SPACER BUSHING L7.2
67/48/1. [1] 146725-4100 SPACER BUSHING L7.3
67/48/1. [1] 146725-4200 SPACER BUSHING L7.4
67/48/1. [1] 146725-4300 SPACER BUSHING L7.5
67/49. [1] 146721-3020 COVER
67/54. [3] 139006-4500 BLEEDER SCREW
67/55. [1] 139006-4700 BLEEDER SCREW
67/56. [1] 146723-0920 CONTROL LEVER
67/57. [1] 146712-0100 BEARING PIN
67/58. [2] 146620-0600 CAPSULE
67/59. [2] 026506-1040 GASKET
67/60. [1] 146724-0300 ELEMENT
67/61. [1] 146724-0600 CAPSULE
67/64. [1] 146933-4400 BRACKET
67/68. [1] 139006-4400 BLEEDER SCREW
67/78. [1] 146600-4400 SEAL RING
67/100. [1] 146928-5700 BRACKET
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3400 THREADED PIN L53.00
67/201B. [1] 146545-3500 THREADED PIN L55.00
67/201C. [1] 146545-3600 THREADED PIN L57.00
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
68. [1] 146514-3521 CONTROL SHAFT
69. [1] 139310-0200 PLAIN WASHER
72. [1] 146539-5701 CONTROL LEVER STAMP 957A
72B. [1] 146539-5801 CONTROL LEVER STAMP 958A
73. [1] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
75. [1] 013020-6040 UNION NUT
95. [1] 146861-2320 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1.0
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0420 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER
115. [1] 146875-8000 SLIDING SLEEVE
116. [1] 146576-0200 CAP
117/1. [1] 146577-1800 PLUG L2.10
117/1. [1] 146577-1900 PLUG L2.30
117/1. [1] 146577-2000 PLUG L2.50
117/1. [1] 146577-2100 PLUG L2.70
117/1. [1] 146577-2200 PLUG L2.90
117/1. [1] 146577-2300 PLUG L3.10
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-3200 PLUG L4.90
117/1. [1] 146577-3300 PLUG L5.10
117/1. [1] 146577-6700 PLUG L2.2
117/1. [1] 146577-6800 PLUG L2.4
117/1. [1] 146577-6900 PLUG L2.6
117/1. [1] 146577-7000 PLUG L2.8
117/1. [1] 146577-7100 PLUG L3.0
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
117/1. [1] 146577-8000 PLUG L4.8
117/1. [1] 146577-8100 PLUG L5.0
117/1. [1] 146877-0000 PLUG L5.2
117/1. [1] 146877-0100 PLUG L5.3
117/1. [1] 146877-0200 PLUG L5.4
117/1. [1] 146877-0300 PLUG L5.5
117/1. [1] 146877-4700 PLUG
117/1. [1] 146877-4800 PLUG
117/1. [1] 146877-4900 PLUG
117/1. [1] 146877-5000 PLUG
123. [4] 146620-0500 HEX-SOCKET-HEAD CAP SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1.0
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0920 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146120-1520 OVER FLOW VALVE
137. [2] 139512-0500 GASKET
138. [1] 146667-3120 INLET UNION
160. [1] 146625-8020 PLATE
200. [1] 146206-0100 COILED SPRING
205. [1] 029470-4030 WOODRUFF KEY
217. [1] 146541-2900 SLOTTED WASHER
218. [1] 146592-4300 COILED SPRING
219. [1] 146541-3000 BUSHING
220. [1] 146592-4400 COILED SPRING
230. [1] 146932-8521 BRACKET
231. [1] 139006-4700 BLEEDER SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146688-0120 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
242. [1] 146662-5521 CONTROL UNIT
243. [1] 146621-4900 UNION NUT
245. [2] 139512-0500 GASKET
246. [1] 027412-2440 EYE BOLT
247. [1] 146609-4620 INLET UNION
280. [1] 146361-0523 START ADVANCE ASSY
281. [1] 146600-0800 O-RING
282. [2] 010206-1240 HEX-SOCKET-HEAD CAP SCREW
287. [1] 020306-4040 O-RING
310. [1] 146683-4721 POTENTCIOMETER
310/1. [1] 146684-5500 POTENTCIOMETER
310/2. [2] 139104-0400 FLAT-HEAD SCREW
310/3. [1] 146648-9200 JOINT CONNECTION
310/3B. [1] 146648-9300 JOINT CONNECTION
310/3C. [1] 146648-9400 JOINT CONNECTION
310/3D. [1] 146648-9500 JOINT CONNECTION
310/3E. [1] 146648-9600 JOINT CONNECTION
310/3F. [1] 146648-9700 JOINT CONNECTION
310/3G. [1] 146648-9800 JOINT CONNECTION
310/3H. [1] 146648-9900 JOINT CONNECTION
310/3I. [1] 146649-0000 JOINT CONNECTION
310/3J. [1] 146649-0100 JOINT CONNECTION
310/3K. [1] 146649-0200 JOINT CONNECTION
310/3L. [1] 146649-0300 JOINT CONNECTION
310/4. [1] 146661-0601 BOOT
312. [1] 146933-4520 PLATE
314. [1] 139006-4400 BLEEDER SCREW
360. [1] 146663-1700 BUSHING
361. [1] 146649-8900 CAP
362. [2] 146620-8402 BLEEDER SCREW
800S. [1] 146018-1320 PUMP HOUSING
800S/1/6. [1] 146601-0700 PACKING RING
804S. [1] 146232-0320 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
812S. [1] 146600-1920 PARTS SET
821S. [1] 146210-5720 ROLLER SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
847S. [1] 146683-4710 POTENTCIOMETER
903. [1] 146672-1720 PULSE GENERATOR
903/2. [1] 146600-1300 O-RING
905. [1] 146679-2022 ADJUSTING DEVICE
906. [1] 146966-9500 NAMEPLATE
912. [1] 139006-4600 BLEEDER SCREW
913. [1] 139006-4700 BLEEDER SCREW

Include in #2:

104746-1592 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 610 950 9460610950
ZEXEL 104746-1592 1047461592
ISUZU 8971195662 8971195662


Zexel num
Bosch num
Firm num
Name
104746-1592 
9 460 610 950 
8971195662  ISUZU
INJECTION-PUMP ASSEMBLY
4JG2-TC K 11CJ INJECTION PUMP ASSY VE4 VE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSEAJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Pump speed r/min   600 600 600
Boost pressure kPa   30 28.7 31.3
Boost pressure kgf/cm2   0.31 0.296 0.324
Boost pressure mmHg   225 215 235
Average injection quantity mm3/st.   73 72.5 73.5
Difference in delivery mm3/st.   4.5
Basic   *
Oil temperature degC   50 48 52
Remarks
CBS
 
Injection timing adjustment_02
Pump speed r/min   1000 1000 1000
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Average injection quantity mm3/st.   74.9 74.4 75.4
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Remarks
Full
 
Injection timing adjustment_03
Pump speed r/min   600 600 600
Boost pressure kPa   30 28.7 31.3
Boost pressure kgf/cm2   0.31 0.296 0.324
Boost pressure mmHg   225 215 235
Average injection quantity mm3/st.   73 72 74
Difference in delivery mm3/st.   4.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   750 750 750
Boost pressure kPa   0 0 0
Boost pressure kgf/cm2   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   59.6 56.6 62.6
Oil temperature degC   50 48 52
Injection timing adjustment_05
Pump speed r/min   1000 1000 1000
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Average injection quantity mm3/st.   74.9 73.9 75.9
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_06
Pump speed r/min   1000 1000 1000
Boost pressure kPa   0 0 0
Boost pressure kgf/cm2   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   58.2 54.7 61.7
Oil temperature degC   50 48 52
Injection timing adjustment_07
Pump speed r/min   1800 1800 1800
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Average injection quantity mm3/st.   72.6 69.1 76.1
Oil temperature degC   50 48 52
Injection quantity adjustment
Pump speed r/min   2300 2300 2300
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Average injection quantity mm3/st.   34.6 31.6 37.6
Difference in delivery mm3/st.   5.5
Basic   *
Oil temperature degC   52 50 54
Injection quantity adjustment_02
Pump speed r/min   2550 2550 2550
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Average injection quantity mm3/st.   5
Oil temperature degC   55 52 58
Injection quantity adjustment_03
Pump speed r/min   2300 2300 2300
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Average injection quantity mm3/st.   34.6 31.6 37.6
Difference in delivery mm3/st.   5.5
Basic   *
Oil temperature degC   52 50 54
Governor adjustment
Pump speed r/min   360 360 360
Boost pressure kPa   0 0 0
Boost pressure kgf/cm2   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   15.8 13.8 17.8
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   360 360 360
Boost pressure kPa   0 0 0
Boost pressure kgf/cm2   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   15.8 13.8 17.8
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Boost pressure kPa   0 0 0
Boost pressure kgf/cm2   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   75 65 85
Oil temperature degC   48 46 50
Remarks
IDLE
 
Timer adjustment_02
Pump speed r/min   100 100 100
Boost pressure kPa   0 0 0
Boost pressure kgf/cm2   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   75 65 85
Oil temperature degC   48 46 50
Speed control lever angle
Pump speed r/min   360 360 360
Boost pressure kPa   0 0 0
Boost pressure kgf/cm2   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
IDLE
 
0000000901
Pump speed r/min   1250 1250 1250
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Overflow quantity cm3/min   650 520 780
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   1250 1250 1250
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Pressure kPa   490 470 510
Pressure kgf/cm2   5 4.8 5.2
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_02
Pump speed r/min   1250 1250 1250
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Pressure kPa   490 470 510
Pressure kgf/cm2   5 4.8 5.2
Basic   *
Oil temperature degC   50 48 52
0000001101
Pump speed r/min   1250 1250 1250
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Timer stroke mm   3.3 3.1 3.5
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   675 675 675
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Timer stroke mm   0.5 0.1 1
Oil temperature degC   50 48 52
_03
Pump speed r/min   1250 1250 1250
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Timer stroke mm   3.3 3.1 3.5
Basic   *
Oil temperature degC   50 48 52
_04
Pump speed r/min   1500 1500 1500
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Timer stroke mm   4.5 4.1 4.9
Oil temperature degC   50 48 52
_05
Pump speed r/min   2000 2000 2000
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Timer stroke mm   6.6 6.3 7
Oil temperature degC   50 48 52
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001401
Pump speed r/min   1250 1250 1250
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Average injection quantity mm3/st.   55.4 54.4 56.4
Timer stroke TA mm   2.4 2.2 2.6
Timer stroke variation dT mm   0.9 0.9 0.9
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   1250 1250 1250
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Average injection quantity mm3/st.   55.4 53.9 56.9
Timer stroke TA mm   24 23.6 24.4
Basic   *
Oil temperature degC   50 48 52
_03
Pump speed r/min   1250 1250 1250
Boost pressure kPa   73.3 72 74.6
Boost pressure kgf/cm2   0.75 0.736 0.764
Boost pressure mmHg   550 540 560
Average injection quantity mm3/st.   38.8 37.3 40.3
Timer stroke TA mm   1.4 0.8 2
Oil temperature degC   50 48 52
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   5.8 5.7 5.9
MS dimension mm   0.7 0.6 0.8
Control lever angle alpha deg.   24 20 28
Control lever angle beta deg.   45 40 50

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

Test data 104746-1592
Adjusting method [applied voltage Vi, dummy bolt (C)] 1. Hold the dummy bolt (C) against the control lever at position N = N1, Q = Q1. Fix using the lock nut. 2. When adjusting the potentiometer, position the control lever against the dummy bolt (C) and adjust the potentiometer so that the output voltage is V1 (V). 3. Remove the dummy bolt (C) after the completion of adjustment. Confirm that the potentiometer output voltage is within the above mentioned standards between the control lever's adjusting point and the idling position. N:Pump speed V:Output voltage Q:Injection quantity P:Boost pressure A:Adjusting point B:Checking point Q2:Idle Q3:Full speed (C): Dummy bolt (D): Bracket for mounting the dummy bolt (E): Part numbers of the dummy bolt and the nut 146526-3300 (bolt) 42L 013020-6040 (nut)
----------
N1=750r/min V1=2.80+-0.03V Q1=16.0+-1.0cm3/1,000st Vi=10V
----------
N1=750r/min N2=360r/min V1=2.80+-0.03V V2=0.62+-0.45V V3=-V Q1=16.0+-1.0cm3/1,000st Q2=15.8+-2.0 Idle cm3/1,000st Q3=-cm3/1,000st P1=73.3kPa P2=550mmHg

0000001901 W-CSD ADJUSTMENT

Test data 104746-1592
Adjustment of the W-CSD 1. Determine the timer advance angle using the graph. 2. Adjust with the screw (A) so that the timer advance angle determined in item 1 is obtained. Y:Time lift TA (mm) X:Temperature t (deg C) (B): Timer stroke TA (mm)
----------

----------
(B):TA=-0.0216t+1.21

0000002001 V-FICD ADJUSTMENT

Test data 104746-1592
Adjustment of the V-FICD 1. Mount the V-FICD after the completion of potentiometer adjustment. 2. Confirm that the clearance between the control lever (B) and the actuator rod (A) is at least L1. 3. Insert the L2 shim between the control lever (D) and the idle set screw (C). 4. Adjust the stroke adjusting screw (E) so that the actuator moves through its full stroke, then fix using nut (F). Note When adjustment is not possible using the stroke adjusting screw (E), move the actuator rod position using (G), (H) and (I). Adjust again the stroke with (E) and (F). 5. Apply negative pressure P1 {P2} to the actuator and confirm that it moves through its full stroke. 6. After releasing negative pressure, re-confirm that the clearance between (A) and (B) is at least L1.
----------
L1=1(mm) L2=2.60+-0.1(mm) P1=-53.3(kPa) P2=-400(mmHg)
----------
L1=1++mm L2=2.60+-0.1mm T1=3.4~4.9Nm(0.35~0.50kgfm) T2=1.4~2.0Nm(0.14~0.20kgfm)




Have questions with 104746-1592?





Group cross 104746-1592 ZEXEL

Isuzu 

9 460 612 340 
8971174360 
INJECTION-PUMP ASSEMBLY
4JB1-T
9 460 611 699 
8971192690 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 611 700 
8971192700 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 611 701 
8971192710 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 611 702 
8971192720 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 610 743 
8971175150 
INJECTION-PUMP ASSEMBLY
4JB1-TC
9 460 611 703 
8971186940 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 610 946 
8971195660 
INJECTION-PUMP ASSEMBLY
4JG2-TC
9 460 610 947 
8971195661 
INJECTION-PUMP ASSEMBLY
4JG2-TC
104746-1592  
9 460 610 950 
8971195662 
INJECTION-PUMP ASSEMBLY
4JG2-TC
Back to top