104745-9001 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047459001


104745-9001 INJECTION-PUMP ASSEMBLY
Rating:
42
Buy INJECTION-PUMP ASSEMBLY 104745-9001 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104745-9001 1047459001

Cross reference number

ZEXEL 104745-9001 1047459001


Zexel num
Bosch num
Firm num
Name
104745-9001 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   49.9 49.4 50.4
Difference in delivery mm3/st.   4
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   41.3 38.8 43.8
Oil temperature degC   48 46 50
Injection timing adjustment_03
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   49.9 48.9 50.9
Difference in delivery mm3/st.   4.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   2150 2150 2150
Average injection quantity mm3/st.   46.3 43.8 48.8
Oil temperature degC   52 50 54
Injection quantity adjustment
Pump speed r/min   2550 2550 2550
Average injection quantity mm3/st.   10.9 8.9 12.9
Difference in delivery mm3/st.   3
Basic   *
Oil temperature degC   55 52 58
Injection quantity adjustment_02
Pump speed r/min   2700 2700 2700
Average injection quantity mm3/st.   5
Oil temperature degC   55 52 58
Injection quantity adjustment_03
Pump speed r/min   2350 2350 2350
Average injection quantity mm3/st.   39.7 39.7 39.7
Oil temperature degC   52 50 54
Injection quantity adjustment_04
Pump speed r/min   2550 2550 2550
Average injection quantity mm3/st.   10.9 8.4 13.4
Basic   *
Oil temperature degC   55 52 58
Governor adjustment
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   7.7 5.7 9.7
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   7.7 5.2 10.2
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   60 45 80
Basic   *
Oil temperature degC   48 46 50
Remarks
Full
 
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   60 45 80
Oil temperature degC   48 46 50
Remarks
Full
 
Speed control lever angle
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position
 
0000000901
Pump speed r/min   1100 1100 1100
Overflow quantity cm3/min   390 260 520
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   1100 1100 1100
Pressure kPa   431 402 460
Pressure kgf/cm2   4.4 4.1 4.7
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_02
Pump speed r/min   1100 1100 1100
Pressure kPa   431 392 470
Pressure kgf/cm2   4.4 4 4.8
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_03
Pump speed r/min   1700 1700 1700
Pressure kPa   559 520 598
Pressure kgf/cm2   5.7 5.3 6.1
Oil temperature degC   50 48 52
0000001101
Pump speed r/min   1100 1100 1100
Timer stroke mm   1.9 1.7 2.1
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   850 850 850
Timer stroke mm   0.5 0 1
Oil temperature degC   50 48 52
_03
Pump speed r/min   1100 1100 1100
Timer stroke mm   1.9 1.6 2.2
Basic   *
Oil temperature degC   50 48 52
_04
Pump speed r/min   1700 1700 1700
Timer stroke mm   4.4 3.9 4.9
Oil temperature degC   50 48 52
_05
Pump speed r/min   2300 2300 2300
Timer stroke mm   6.1 5.6 6.5
Oil temperature degC   52 50 54
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001401
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   31 30.5 31.5
Timer stroke TA mm   1.2 1 1.4
Timer stroke variation dT mm   0.7 0.7 0.7
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   31 30 32
Timer stroke TA mm   1.2 0.9 1.5
Basic   *
Oil temperature degC   50 48 52
_03
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   22 19.5 24.5
Timer stroke TA mm   0.6 0.1 1.1
Oil temperature degC   50 48 52
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   5.8 5.7 5.9
MS dimension mm   0.9 0.8 1
Pre-stroke mm   0.1 0.08 0.12
Control lever angle alpha deg.   25 23 27
Control lever angle beta deg.   36 31 41

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

Test data 104745-9001
Potentiometer adjustment 1. Applied voltage: Vi 2. Boost pressure = P1kPa {P2 mmHg} 3. Set the control lever at the adjusting point. Position the dummy bolt against the lever and fix. 4. Assemble the potentiometer to obtain output voltage V1 (V) at the fixed position. 5. After mounting the potentiometer, remove the dummy bolt. At TCV duty 100% A:Adjusting point B:Performance standards C:Control lever angle N:Pump speed V:Output voltage Q:Injection quantity C1:Idle C2:Full speed
----------

----------
N1=-r/min Q1=-cm3/1,000st V1=1.6+-0.03V V2=7.6+-1.1V V3=-V V4=-V V5=-V C3=(4.9+-2.5)deg C4=(19.4+-4)deg P1=-kPa P2=-mmHg Vi=10V




Have questions with 104745-9001?





Group cross 104745-9001 ZEXEL

Nissan-Diesel 

 
167006T002 
INJECTION-PUMP ASSEMBLY
TD27
104745-9001  
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 460 611 656 
167006T006 
INJECTION-PUMP ASSEMBLY

Nissan 

9 460 611 962 
167006T016 
INJECTION-PUMP ASSEMBLY
TD27

Nissan-Diesel 

9 460 611 962 
167006T016 
INJECTION-PUMP ASSEMBLY
TD27
Back to top