101607-9801 ZEXEL 9 400 615 763 BOSCH INJECTION-PUMP ASSEMBLY 9400615763 1016079801 16714z6017


101607-9801 INJECTION-PUMP ASSEMBLY
Rating:
68
Buy INJECTION-PUMP ASSEMBLY 101607-9801 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 763 9400615763
ZEXEL 101607-9801 1016079801
NISSAN-DIESEL 16714Z6017 16714z6017

Include in #2:

Cross reference number

BOSCH 9 400 615 763 9400615763
ZEXEL 101607-9801 1016079801
NISSAN-DIESEL 16714Z6017 16714z6017


Zexel num
Bosch num
Firm num
Name
101607-9801 
9 400 615 763 
16714Z6017  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
MD92 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8260
Bosch type code   9 430 610 133
Nozzle   105780-0120
Bosch type code   1 688 901 990
Nozzle holder   105780-2190
Opening pressure MPa   18
Opening pressure kgf/cm2   184
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-8921
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.7 3.65 3.75
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.8
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   95 93.4 96.6
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   Z
Rack position   9.5+-0.5
Pump speed r/min   280 280 280
Average injection quantity mm3/st.   12 11 13
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(11.8)
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   95 94 96
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1+0.9
Pump speed r/min   1450 1450 1450
Average injection quantity mm3/st.   100.5 96.5 104.5
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   125 125 135
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   970--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   920
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   (1000)
Advance angle deg.   1.5 1 2
Timer adjustment_04
Pump speed r/min   1160
Advance angle deg.   1.5 1 2
Timer adjustment_05
Pump speed r/min   1450
Advance angle deg.   7 6.5 7.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101607-9801
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=M00
----------

Speed control lever angle

Test data 101607-9801
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=36mm
----------
a=6.5deg+-5deg b=(42.5deg)+-3deg

Stop lever angle

Test data 101607-9801
N:Pump normal S:Stop the pump. (1)Use the pin at R = aa
----------
aa=42mm
----------
a=5deg+-5deg b=40deg+-5deg

Timing setting

Test data 101607-9801
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(80deg)




Have questions with 101607-9801?





Group cross 101607-9801 ZEXEL

Nissan-Diesel 

9 400 610 737 
16713Z6562 
INJECTION-PUMP ASSEMBLY
MD92
101607-9801  
9 400 615 763 
16714Z6017 
INJECTION-PUMP ASSEMBLY
MD92
F 01G 09U 0HW 
16713Z6566 
INJECTION-PUMP ASSEMBLY
FE6E
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

F 019 Z10 117 
16713Z6904 
INJECTION-PUMP ASSEMBLY
FE6E
F 01G 09U 05V 
16713Z6967 
INJECTION-PUMP ASSEMBLY
FE6E
9 400 615 764 
16714Z5604 
INJECTION-PUMP ASSEMBLY
FE6E
 
16713Z6567 
INJECTION-PUMP ASSEMBLY
FE6E
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

F 01G 09U 05W 
16713Z6905 
INJECTION-PUMP ASSEMBLY
FE6E
F 01G 09U 05X 
16713Z6968 
INJECTION-PUMP ASSEMBLY
FE6E
F 01G 09U 05Y 
16714Z5605 
INJECTION-PUMP ASSEMBLY
FE6E
 
16713Z6568 
INJECTION-PUMP ASSEMBLY
FE6E
F 01G 09U 05Z 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

F 01G 09U 0HX 
16713Z6569 
INJECTION-PUMP ASSEMBLY
FE6E
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
16713Z6810 
INJECTION-PUMP ASSEMBLY
FE6E
9 400 619 914 
16713Z6906 
INJECTION-PUMP ASSEMBLY
FE6E
F 01G 09U 060 
16714Z5606 
INJECTION-PUMP ASSEMBLY
FE6E

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
KH
 
 
INJECTION-PUMP ASSEMBLY
KH
 
 
INJECTION-PUMP ASSEMBLY
KH

Mitsubishi 

F 019 Z10 118 
 
INJECTION-PUMP ASSEMBLY
6D17-2

Nissan-Diesel 

9 400 610 738 
16700Z5767 
INJECTION-PUMP ASSEMBLY
FE6B
Back to top