101602-7260 ZEXEL 9 400 614 887 BOSCH INJECTION-PUMP ASSEMBLY 9400614887 1016027260 1156025630


101602-7260 INJECTION-PUMP ASSEMBLY
Rating:
8
Buy INJECTION-PUMP ASSEMBLY 101602-7260 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 887 9400614887
ZEXEL 101602-7260 1016027260
ISUZU 1156025630 1156025630

Service parts 101602-7260 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-8450
3. GOVERNOR 105419-0190
4. SUPPLY PUMP 105220-7260
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156636-5620
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-5421
11. Nozzle and Holder 1-15300-199-2
12. Open Pre:MPa(Kqf/cm2) 14.7{150}
13. NOZZLE-HOLDER 105030-3391
14. NOZZLE 105015-7070
15. NOZZLE SET

Include in #1:

101602-7260 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 614 887 9400614887
ZEXEL 101602-7260 1016027260
ISUZU 1156025630 1156025630


Zexel num
Bosch num
Firm num
Name
101602-7260 
9 400 614 887 
1156025630  ISUZU
INJECTION-PUMP ASSEMBLY
6BD1 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.6
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   56.4 55.4 57.4
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.8+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   9.4 8.1 10.7
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 101602-7260
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)Set idle sub-spring (4)Main spring setting
----------
K=10 RAL=12+-0.1mm
----------

Speed control lever angle

Test data 101602-7260
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=6deg+-5deg b=20deg+-5deg

Stop lever angle

Test data 101602-7260
N:Pump normal S:Stop the pump.
----------

----------
a=12deg+-5deg b=46deg+-5deg

Timing setting

Test data 101602-7260
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=18deg
----------
a=(90deg)




Have questions with 101602-7260?





Group cross 101602-7260 ZEXEL

Isuzu 

9 400 614 883 
1156024940 
INJECTION-PUMP ASSEMBLY
6BG1-TPB
9 400 614 884 
1156024950 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 619 720 
1156025480 
INJECTION-PUMP ASSEMBLY
6BG1-T
 
1156025490 
INJECTION-PUMP ASSEMBLY
6BG1-T
9 400 614 885 
1156025620 
INJECTION-PUMP ASSEMBLY
6BB1
9 400 614 886 
1156025790 
INJECTION-PUMP ASSEMBLY
6BD1-T
101602-7260  
9 400 614 887 
1156025630 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156025880 
INJECTION-PUMP ASSEMBLY
6BB1
9 400 614 888 
1156025970 
INJECTION-PUMP ASSEMBLY
6BD1-TQF
 
1156026220 
INJECTION-PUMP ASSEMBLY
6BD1
Back to top