101602-1240 ZEXEL 9 400 614 725 BOSCH INJECTION-PUMP ASSEMBLY 9400614725 1016021240 me070934


101602-1240 INJECTION-PUMP ASSEMBLY
Rating:
46
Buy INJECTION-PUMP ASSEMBLY 101602-1240 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 725 9400614725
ZEXEL 101602-1240 1016021240
MITSUBISHI ME070934 me070934

Service parts 101602-1240 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101061-8780
3. GOVERNOR 105412-2150
4. SUPPLY PUMP 105210-4661
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156637-6920
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-5540
11. Nozzle and Holder ME047437
12. Open Pre:MPa(Kqf/cm2) 17.7{180}
13. NOZZLE-HOLDER 105031-3900
14. NOZZLE 105015-6230
15. NOZZLE SET

Include in #1:

101602-1240 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 725 9400614725
ZEXEL 101602-1240 1016021240
MITSUBISHI ME070934 me070934


Zexel num
Bosch num
Firm num
Name
101602-1240 
9 400 614 725 
ME070934  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D16T K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.2 4.15 4.25
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.9
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   88.2 87.2 89.2
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8.7+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   10.7 9.2 12.2
Max. variation between cylinders %   0 -15 15
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101602-1240
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Supplied with torque spring not set. (3)At shipping (4)Rack difference between N = N1 and N = N2 (5)Idle sub spring setting: L1.
----------
K=8 N1=1100r/min N2=750r/min L1=7.4-0.5mm
----------

Speed control lever angle

Test data 101602-1240
F:Full speed I:Idle (1)Stopper bolt setting (2)At shipping
----------

----------
a=19deg+-5deg b=(2deg) c=6deg+-5deg

Stop lever angle

Test data 101602-1240
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=26deg+-5deg b=53deg+-5deg

Timing setting

Test data 101602-1240
(1)Pump vertical direction (2)Position of coupling's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(1deg)




Have questions with 101602-1240?





Group cross 101602-1240 ZEXEL

Mitsubishi 

9 400 614 721 
ME070913 
INJECTION-PUMP ASSEMBLY
6D16
9 400 614 722 
ME070887 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 619 653 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 614 723 
ME070932 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 614 724 
ME070933 
INJECTION-PUMP ASSEMBLY
6D16T
101602-1240  
9 400 614 725 
ME070934 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 614 726 
ME070854 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 610 568 
ME043033 
INJECTION-PUMP ASSEMBLY
6D15T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 114 
ME047566 
INJECTION-PUMP ASSEMBLY
6D14T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 614 727 
ME047567 
INJECTION-PUMP ASSEMBLY
6D15T
9 400 610 378 
ME047581 
INJECTION-PUMP ASSEMBLY
6D15T
Back to top