146577-2800 ZEXEL 9 461 610 393 BOSCH PLUG 9461610393 1465772800 8944085300


 

Information plug

BOSCH 9 461 610 393 9461610393
ZEXEL 146577-2800 1465772800
ISUZU 8944085300 8944085300
146577-2800 PLUG
Rating:
21
Buy PLUG 146577-2800 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
146577-2800 
9 461 610 393 
8944085300  ISUZU
PLUG
C 11FV CLOSING PLUG parts(VE) Others
146577-2800 
9 461 610 393 
ME741170  MITSUBISHI
PLUG
C 11FV CLOSING PLUG parts(VE) Others
146577-2800 
9 461 610 393 
19207W1701  NISSAN
PLUG
C 11FV CLOSING PLUG parts(VE) Others
146577-2800 
9 461 610 393 
19207W1701  NISSAN-DIESEL
PLUG
C 11FV CLOSING PLUG parts(VE) Others
146577-2800 
9 461 610 393 
S21024242  MAZDA
PLUG
C 11FV CLOSING PLUG parts(VE) Others




Information:

1. Disconnect air line (1) at fitting. Remove two bolts (2). Pull up and toward the front of the engine to remove the bolt of the fuel ratio from the groove (slot) in the collar for the governor. Remove fuel ratio control (3). Remove gasket from fuel ratio control.2. Install a new gasket on fuel ratio control. Install fuel ratio control (3). Make sure bolt engages with stop collar in governor control.3. Install two bolts (2). Connect air line (1) at fitting.4. Make sure the fuel ratio control is in correct adjustment. See Systems Operation Testing & Adjusting Manual for this procedure.5. Install a new governor seal.Disassemble Fuel Ratio Control
Start By:a. remove fuel ratio control 1. Remove two bolts (1) and the housing (2). 2. Remove valve assembly (3).3. Remove seal (4) and O-ring seal from valve.4. Remove the retainer (5) and two springs (6). 5. Remove three bolts (9) and cover (10).6. Remove valve (7), diaphragm (8), retainer and spring. 7. Remove pin (12) from valve (7).8. Remove cover (11) from the valve.9. Remove the seal from the cover (11).Assemble Fuel Ratio Control
1. Put clean engine oil on lip of seal. Install the seal (1) in cover (2). Install seal so lip of seal is toward the inside of the cover. 2. Install the valve (3) into cover (2).3. Install the pin that holds cover on valve. 4. Install spring (7) and the retainer (6) in cover (8).5. Install diaphragm (5) on the valve assembly (4) and in the cover. 6. Install cover and three bolts (11) that hold covers together.7. Put clean engine oil on seal and ring seal. Install the seals (10) on valve.8. Install the two springs (13), retainer and valve assembly (12).9. Install housing (9) and two bolts.
Correct adjustment must be made to fuel ratio control before installation. See Systems Operation Testing & Adjusting for this procedure.
End By:a. install fuel ratio control

Have questions with 146577-2800?





Group cross 146577-2800 ZEXEL

Isuzu 

146577-2800  
9 461 610 393 
8944085300 
PLUG

Mitsubishi 

146577-2800  
9 461 610 393 
ME741170 
PLUG

Nissan 

146577-2800  
9 461 610 393 
19207W1701 
PLUG

Nissan-Diesel 

146577-2800  
9 461 610 393 
19207W1701 
PLUG

Mazda 

146577-2800  
9 461 610 393 
S21024242 
PLUG
Back to top