106971-0263 ZEXEL 9 400 618 619 BOSCH INJECTION-PUMP ASSEMBLY 9400618619 1069710263 1671397068


106971-0263 INJECTION-PUMP ASSEMBLY
Rating:
62
Buy INJECTION-PUMP ASSEMBLY 106971-0263 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 618 619 9400618619
ZEXEL 106971-0263 1069710263
NISSAN-DIESEL 1671397068 1671397068

Service parts 106971-0263 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106097-5450
3. GOVERNOR 105487-0984
4. SUPPLY PUMP 105217-1850
5. AUTOM. ADVANCE MECHANIS 105636-2810
6. COUPLING PLATE 105662-1150
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5840
11. Nozzle and Holder 1660097019
12. Open Pre:MPa(Kqf/cm2) 19.6(200)
13. NOZZLE-HOLDER 105031-4210
14. NOZZLE 105015-5450
15. NOZZLE SET

Include in #1:

106971-0263 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 618 619 9400618619
ZEXEL 106971-0263 1069710263
NISSAN-DIESEL 1671397068 1671397068


Zexel num
Bosch num
Firm num
Name
106971-0263 
9 400 618 619 
1671397068  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
RE10 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   10-9-4-3 -6-5-8-7 -2-1
Pre-stroke mm   3.65 3.6 3.7
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 10-9
deg.   45 44.5 45.5
Difference between angles 2
Cal 10-4
deg.   72 71.5 72.5
Difference between angles 3
Cal 10-3
deg.   117 116.5 117.5
Difference between angles 4
Cal 10-6
deg.   144 143.5 144.5
Difference between angles 5
Cal 10-5
deg.   189 188.5 189.5
Difference between angles 6
Cal 10-8
deg.   216 215.5 216.5
Difference between angles 7
Cal 10-7
deg.   261 260.5 261.5
Difference between angles 8
Cal 10-2
deg.   288 287.5 288.5
Difference between angles 9
Cal 10-1
deg.   333 332.5 333.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.3
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   107.2 106.2 108.2
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.7+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   11.9 9.9 13.9
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   550
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   1 0.5 1.5
Timer adjustment_03
Pump speed r/min   1150
Advance angle deg.   5.5 5 6
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106971-0263
N:Pump speed R:Rack position (mm) (1)Rack limit using the stop lever: R1 (2)Beginning of damper spring operation: DL (3)Variable speed specification: idling adjustment (4)Main spring setting (5)Set idle sub-spring
----------
R1=10.6+0.2mm DL=5.7-0.2mm
----------

Speed control lever angle

Test data 106971-0263
F:Full speed I:Idle
----------

----------
a=9.5deg+-5deg b=10deg+-5deg

0000000901

Test data 106971-0263
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=24.5deg+-5deg b=33deg+-3deg

Stop lever angle

Test data 106971-0263
N:Pump normal S:Stop the pump. (1)Rack position = aa (2)Use the hole at R = bb
----------
aa=10.6+0.2mm bb=32mm
----------
a=27.5deg+-5deg b=2deg+-5deg

Timing setting

Test data 106971-0263
(1)Pump vertical direction (2)Position of the coupling's key groove at the start of injection for the No. 10 cylinder. (3)- (4)-
----------

----------
a=(90deg)




Have questions with 106971-0263?





Group cross 106971-0263 ZEXEL

Nissan-Diesel 

 
1679097009 
INJECTION-PUMP ASSEMBLY
RD10T04
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 619 739 
1679097013 
INJECTION-PUMP ASSEMBLY
RD10T04
9 400 618 617 
1679097062 
INJECTION-PUMP ASSEMBLY
RD10T04
 
1679097010 
INJECTION-PUMP ASSEMBLY
RD10T06
 
1679097014 
INJECTION-PUMP ASSEMBLY
RD10T06
 
1679097011 
INJECTION-PUMP ASSEMBLY
RD10TA06
9 400 610 377 
1679097015 
INJECTION-PUMP ASSEMBLY
RD10TA06
 
1671397061 
INJECTION-PUMP ASSEMBLY
RD10T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671397062 
INJECTION-PUMP ASSEMBLY
RD10T04
 
1670097071 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 618 
1670097074 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY
F 019 Z10 550 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

106971-0263  
9 400 618 619 
1671397068 
INJECTION-PUMP ASSEMBLY
RE10
 
 
INJECTION-PUMP ASSEMBLY
RD10
 
 
INJECTION-PUMP ASSEMBLY
F 019 Z10 551 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 620 
1671397067 
INJECTION-PUMP ASSEMBLY
RD10
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671297020 
INJECTION-PUMP ASSEMBLY
RD10T
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671397071 
INJECTION-PUMP ASSEMBLY
RD10T
Back to top