106961-0101 ZEXEL 9 400 618 567 BOSCH INJECTION-PUMP ASSEMBLY 9400618567 1069610101 1679097012


106961-0101 INJECTION-PUMP ASSEMBLY
Rating:
54
Buy INJECTION-PUMP ASSEMBLY 106961-0101 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 618 567 9400618567
ZEXEL 106961-0101 1069610101
NISSAN-DIESEL 1679097012 1679097012

Service parts 106961-0101 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106096-5210
3. GOVERNOR 105407-2230
4. SUPPLY PUMP 105217-6010
5. AUTOM. ADVANCE MECHANIS 105636-5030
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-4680
11. Nozzle and Holder 16600-97003
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-4210
14. NOZZLE 105015-3360
15. NOZZLE SET

Include in #1:

106961-0101 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 618 567 9400618567
ZEXEL 106961-0101 1069610101
NISSAN-DIESEL 1679097012 1679097012


Zexel num
Bosch num
Firm num
Name
106961-0101 
9 400 618 567 
1679097012  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
RD10 K 14CE INJECTION PUMP ASSY PE10P PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle   105015-2780
Bosch type code   DLLA166S374NP6
Nozzle holder   105031-4190
Opening pressure MPa   19.6
Opening pressure kgf/cm2   200
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-1050
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   10-9-4-3 -6-5-8-7 -2-1
Pre-stroke mm   3.65 3.6 3.7
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 10-9
deg.   45 44.5 45.5
Difference between angles 2
Cal 10-4
deg.   72 71.5 72.5
Difference between angles 3
Cal 10-3
deg.   117 116.5 117.5
Difference between angles 4
Cal 10-6
deg.   144 143.5 144.5
Difference between angles 5
Cal 10-5
deg.   189 188.5 189.5
Difference between angles 6
Cal 10-8
deg.   216 215.5 216.5
Difference between angles 7
Cal 10-7
deg.   261 260.5 261.5
Difference between angles 8
Cal 10-2
deg.   288 287.5 288.5
Difference between angles 9
Cal 10-1
deg.   333 332.5 333.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.2
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   103 102 104
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   10.2
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   97 94 100
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   10.2
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   93.5 89.5 97.5
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   6+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   20 18 22
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   300+100
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   3 2.5 3.5
Timer adjustment_03
Pump speed r/min   1000
Advance angle deg.   5.6 5.1 6.1
Timer adjustment_04
Pump speed r/min   1250+50
Advance angle deg.   8 7.5 8.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106961-0101
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)Beginning of damper spring operation: DL
----------
K=15 RAL=10.9+-0.1mm DL=6-0.5mm
----------

Speed control lever angle

Test data 106961-0101
F:Full speed I:Idle S:Stop
----------

----------
a=18deg+-5deg b=32deg+-3deg c=33deg+-5deg

Stop lever angle

Test data 106961-0101
N:Pump normal S:Stop the pump.
----------

----------
a=10.5deg+-5deg b=42.5deg+-5deg




Have questions with 106961-0101?





Group cross 106961-0101 ZEXEL

Nissan-Diesel 

 
1679097000 
INJECTION-PUMP ASSEMBLY
RD10
106961-0101  
9 400 618 567 
1679097012 
INJECTION-PUMP ASSEMBLY
RD10
 
1671797000 
INJECTION-PUMP ASSEMBLY
RD10
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671797008 
INJECTION-PUMP ASSEMBLY
RD10
 
1671397001 
INJECTION-PUMP ASSEMBLY
RD10
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1670097013 
INJECTION-PUMP ASSEMBLY
RD10
 
1671397003 
INJECTION-PUMP ASSEMBLY
RD10
 
1671797001 
INJECTION-PUMP ASSEMBLY
RD10
 
1671397004 

RD10
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671797004 
INJECTION-PUMP ASSEMBLY
RD10
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 568 
1671397007 
INJECTION-PUMP ASSEMBLY
RD10
 
1679097003 

RD10
Back to top