106871-5541 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1068715541


106871-5541 INJECTION-PUMP ASSEMBLY
Rating:
33
Buy INJECTION-PUMP ASSEMBLY 106871-5541 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106871-5541 1068715541

Cross reference number

ZEXEL 106871-5541 1068715541


Zexel num
Bosch num
Firm num
Name
106871-5541 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8250
Bosch type code   1 688 901 101
Nozzle   105780-0120
Bosch type code   1 688 901 990
Nozzle holder   105780-2190
Opening pressure MPa   20.7
Opening pressure kgf/cm2   211
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131425-0120
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
RED3 control unit part number   407910-3 960
RED3 rack sensor specifications mm   19
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-8-7-5- 4-3-6-2
Pre-stroke mm   3.9 3.87 3.93
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-8
deg.   45 44.75 45.25
Difference between angles 2
Cal 1-7
deg.   90 89.75 90.25
Difference between angles 3
Cal 1-5
deg.   135 134.75 135.25
Difference between angles 4
Cal 1-4
deg.   180 179.75 180.25
Difference between angles 5
Cal 1-3
deg.   225 224.75 225.25
Difference between angles 6
Cal 1-6
deg.   270 269.75 270.25
Difference between angles 7
Cyl.1-2
deg.   315 314.75 315.25
Injection quantity adjustment
Rack position   (13.7)
Vist V   1.8 1.8 1.8
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   141.5 139.5 143.5
Max. variation between cylinders %   0 -4 4
Basic   *
Injection quantity adjustment_02
Rack position   (9)
Vist V   2.5 2.4 2.6
Pump speed r/min   330 330 330
Average injection quantity mm3/st.   16 14 18
Max. variation between cylinders %   0 -10 10

Test data Ex:

Governor adjustment

Test data 106871-5541
(1)Adjusting range (2)Step response time (N): Speed of the pump (L): Load (theta) Advance angle (Srd1) Step response time 1 (Srd2) Step response time 2 1. Adjusting conditions for the variable timer (1)Adjust the clearance between the pickup and the protrusion to L.
----------
L=1-0.2mm N2=800r/min C2=(9)deg t1=1.7--sec. t2=1.7--sec.
----------
N1=1000++r/min P1=0kPa(0kgf/cm2) P2=392kPa(4kgf/cm2) C1=9+-0.3deg R01=0/4load R02=4/4load

Speed control lever angle

Test data 106871-5541
N:Pump normal S:Stop the pump. (1)Rack position = aa (2)Rack position bb
----------
aa=20mm bb=1mm
----------
a=27deg+-5deg b=37deg+-5deg

0000000901

Test data 106871-5541
(1)Pump vertical direction (2)Position of the coupling's key groove at the beginning of injection of the No. 8 cylinder. (3)- (4)-
----------

----------
a=(90deg)

Stop lever angle

Test data 106871-5541
(Rs) rack sensor specifications (C/U) control unit part number (V) Rack sensor output voltage (R) Rack position (mm) 1. Confirming governor output characteristics (rack 19 mm, span 6 mm) (1)When the output voltages of the rack sensor are V1 and V2, check that the rack positions R1 and R2 in the table above are satisfied.
----------

----------




Have questions with 106871-5541?





Group cross 106871-5541 ZEXEL

Nissan-Diesel 

9 400 611 019 
1680197563 
INJECTION-PUMP ASSEMBLY
RG8
9 400 611 020 
1680197564 
INJECTION-PUMP ASSEMBLY
RH8
9 400 618 170 
1680197566 
INJECTION-PUMP ASSEMBLY
RG8
F 01G 09U 09Z 
 
INJECTION-PUMP ASSEMBLY
F 01G 09U 0A0 
 
INJECTION-PUMP ASSEMBLY
F 01G 09U 0A1 
 
INJECTION-PUMP ASSEMBLY
RF8

Nissan-Diesel 

9 400 618 171 
1680197568 
INJECTION-PUMP ASSEMBLY
RF8
 
1680197573 
INJECTION-PUMP ASSEMBLY
RF8TA
106871-5541  
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 172 
1680197579 
INJECTION-PUMP ASSEMBLY
RF8TA
F 01G 09U 0A2 
 
INJECTION-PUMP ASSEMBLY
F 01G 09U 0A3 
 
INJECTION-PUMP ASSEMBLY
F 01G 09U 0A4 
 
INJECTION-PUMP ASSEMBLY
RG8

Nissan-Diesel 

9 400 618 173 
1680197569 
INJECTION-PUMP ASSEMBLY
RG8
 
1680197570 
INJECTION-PUMP ASSEMBLY
RG8
F 01G 09U 0A5 
 
INJECTION-PUMP ASSEMBLY
F 01G 09U 0A6 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 618 174 
1680197578 
INJECTION-PUMP ASSEMBLY
RG8
F 01G 09U 0A7 
 
INJECTION-PUMP ASSEMBLY
F 01G 09U 0A8 
 
INJECTION-PUMP ASSEMBLY
F 01G 09U 0A9 
 
INJECTION-PUMP ASSEMBLY
RH8

Nissan-Diesel 

9 400 618 175 
1680197571 
INJECTION-PUMP ASSEMBLY
RH8
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
9 400 619 880 
 
INJECTION-PUMP ASSEMBLY
RF8

Nissan-Diesel 

9 400 618 176 
1680197574 
INJECTION-PUMP ASSEMBLY
RF8
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
F 01G 09U 0AA 
 
INJECTION-PUMP ASSEMBLY
RG8

Nissan-Diesel 

9 400 618 177 
1680197575 
INJECTION-PUMP ASSEMBLY
RG8
Back to top