106871-3861 ZEXEL 9 400 618 118 BOSCH INJECTION-PUMP ASSEMBLY 9400618118 1068713861 220004851a


106871-3861 INJECTION-PUMP ASSEMBLY
Rating:
10
Buy INJECTION-PUMP ASSEMBLY 106871-3861 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 618 118 9400618118
ZEXEL 106871-3861 1068713861
HINO 220004851A 220004851a

Cross reference number

BOSCH 9 400 618 118 9400618118
ZEXEL 106871-3861 1068713861
HINO 220004851A 220004851a


Zexel num
Bosch num
Firm num
Name
106871-3861 
9 400 618 118 
220004851A  HINO
INJECTION-PUMP ASSEMBLY
EF750 A * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-0820
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-8-6-2- 7-5-4-3
Pre-stroke mm   4.8 4.74 4.8
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-8
deg.   45 44.75 45.25
Difference between angles 2
Cal 1-6
deg.   90 89.75 90.25
Difference between angles 3
Cyl.1-2
deg.   135 134.75 135.25
Difference between angles 4
Cal 1-7
deg.   180 179.75 180.25
Difference between angles 5
Cal 1-5
deg.   225 224.75 225.25
Difference between angles 6
Cal 1-4
deg.   270 269.75 270.25
Difference between angles 7
Cal 1-3
deg.   315 314.75 315.25
Injection quantity adjustment
Adjusting point   A
Rack position   7.7
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   123 121 125
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8.2+-0.5
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   141 138 144
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   8.1
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   142 136 148
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   -
Rack position   5.1+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   12.6 9.6 15.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_05
Adjusting point   E
Rack position   7.9
Pump speed r/min   1175 1175 1175
Average injection quantity mm3/st.   131 128 134
Fixing the lever   *
Injection quantity adjustment_06
Adjusting point   I
Rack position   10.3+-0. 5
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   155 150 160
Fixing the lever   *
Rack limit   *
Injection quantity adjustment_07
Adjusting point   H
Rack position   7.7
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   124 118 130
Fixing the lever   *
Timer adjustment
Pump speed r/min   (860)
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1100
Advance angle deg.   4.75 4.45 5.05
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106871-3861
N:Pump speed R:Rack position (mm) (1)RACK LIMIT (2)Damper spring setting: DL
----------
DL=3.8-0.5mm
----------

Speed control lever angle

Test data 106871-3861
F:Full speed
----------

----------
a=22deg+-5deg

0000000901

Test data 106871-3861
F:Full load I:Idle (1)Use the hole at R = aa (2)Stopper bolt setting
----------
aa=50mm
----------
a=36deg+-3deg b=39deg+-5deg

Stop lever angle

Test data 106871-3861
N:Engine manufacturer's normal use S:Stop the pump. (1)Rack position = aa (2)Rack position bb (3)Set the stopper bolt (apply red paint). (4)Free (at shipping)
----------
aa=12mm bb=3mm
----------
a=(15deg) b=48deg+-5deg c=26deg+-5deg

Timing setting

Test data 106871-3861
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(80deg)




Have questions with 106871-3861?





Group cross 106871-3861 ZEXEL

Hino 

 
220004760A 
INJECTION-PUMP ASSEMBLY
EF750
9 400 618 114 
220004761A 
INJECTION-PUMP ASSEMBLY
EF750
 
220004770A 
INJECTION-PUMP ASSEMBLY
EF750
9 400 618 115 
220004771A 
INJECTION-PUMP ASSEMBLY
EF750
 
220004800A 
INJECTION-PUMP ASSEMBLY
EF750
9 400 618 116 
220004801A 
INJECTION-PUMP ASSEMBLY
EF750
 
220801290A 
INJECTION-PUMP ASSEMBLY
EF750
 
220801291A 
INJECTION-PUMP ASSEMBLY
EF750
9 400 618 117 
220801292A 
INJECTION-PUMP ASSEMBLY
EF750
 
220202750A 
INJECTION-PUMP ASSEMBLY
EF750
 
220202760A 
INJECTION-PUMP ASSEMBLY
EF750T
 
220004850A 
INJECTION-PUMP ASSEMBLY
EF750
106871-3861  
9 400 618 118 
220004851A 
INJECTION-PUMP ASSEMBLY
EF750
 
220004860A 
INJECTION-PUMP ASSEMBLY
EF750
9 400 618 119 
220004861A 
INJECTION-PUMP ASSEMBLY
EF750
 
220004870A 
INJECTION-PUMP ASSEMBLY
EF750
9 400 618 120 
220004871A 
INJECTION-PUMP ASSEMBLY
EF750
 
220004880A 
INJECTION-PUMP ASSEMBLY
EF750
 
220004881A 
INJECTION-PUMP ASSEMBLY
EF750
9 400 618 121 
220004882A 
INJECTION-PUMP ASSEMBLY
EF750
Back to top