106861-2630 ZEXEL 9 400 612 674 BOSCH INJECTION-PUMP ASSEMBLY 9400612674 1068612630 me441179


106861-2630 INJECTION-PUMP ASSEMBLY
Rating:
10
Buy INJECTION-PUMP ASSEMBLY 106861-2630 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 674 9400612674
ZEXEL 106861-2630 1068612630
MITSUBISHI ME441179 me441179

Service parts 106861-2630 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106086-5730
3. GOVERNOR 105407-7980
4. SUPPLY PUMP 105237-0280
5. AUTOM. ADVANCE MECHANIS 105681-2800
6. COUPLING PLATE 105663-0390
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4972
11. Nozzle and Holder ME066034
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105030-4990
14. NOZZLE 105015-4580
15. NOZZLE SET

Include in #1:

106861-2630 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 612 674 9400612674
ZEXEL 106861-2630 1068612630
MITSUBISHI ME441179 me441179


Zexel num
Bosch num
Firm num
Name
106861-2630 
106861-2631 
9 400 612 674 
ME441179  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC9TL * K 14CD PE8P PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-8020
Overflow valve opening pressure kPa   255 255 255
Overflow valve opening pressure kgf/cm2   2.6 2.6 2.6
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-7-3- 4-5-6-8
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-3
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-5
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cal 1-8
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.2
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   145 142 148
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   4.9+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   15.5 12.9 18.1
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   D
Rack position   11.4++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   135 135 145
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   850++
Advance angle deg.   0 0 0
Remarks
Do not advance until starting N = 850.
 
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   3 3 3
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106861-2630
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Rack difference between N = N1 and N = N2 (5)Set idle sub-spring
----------
K=9 N1=850r/min N2=500r/min
----------

Speed control lever angle

Test data 106861-2630
F:Full speed I:Idle (1)Set the pump speed at aa (2)Set the pump speed at bb. (3)Stopper bolt setting
----------
aa=907r/min bb=753r/min
----------
a=(6deg)+-5deg b=(29.5deg)+-5deg c=(0.5deg)+-5deg

Stop lever angle

Test data 106861-2630
N:Pump normal S:Stop the pump. A:Right front B:Right rear (1)Normal
----------

----------
a=19deg+-5deg b=46deg+-5deg c=28deg+-5deg d=53deg+-5deg

Timing setting

Test data 106861-2630
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(40deg)




Have questions with 106861-2630?





Group cross 106861-2630 ZEXEL

9 400 619 666 
 
INJECTION-PUMP ASSEMBLY
F 01G 09U 09G 
 
INJECTION-PUMP ASSEMBLY
8DC9T

Mitsubishi 

9 400 618 001 
ME098786 
INJECTION-PUMP ASSEMBLY
8DC9T
9 400 618 002 
ME098787 
INJECTION-PUMP ASSEMBLY
8DC9T
9 400 612 507 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 227 
ME440739 
INJECTION-PUMP ASSEMBLY
8DC9T
106861-2630  

106861-2631 
9 400 612 674 
ME441179 
INJECTION-PUMP ASSEMBLY
8DC9TL
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 228 
ME442511 
INJECTION-PUMP ASSEMBLY
8DC9TL
9 400 618 003 
ME441199 
INJECTION-PUMP ASSEMBLY
8DC9T
9 400 618 004 
ME441817 
INJECTION-PUMP ASSEMBLY
8DC9T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z20 229 
ME442512 
INJECTION-PUMP ASSEMBLY
8DC9T
F 019 Z10 232 
ME442876 
INJECTION-PUMP ASSEMBLY
8DC9TL
Back to top