Fuel injectors
  1. Home
  2. injection
  3. #1066921060

106692-1060 ZEXEL 9 400 610 316 BOSCH INJECTION-PUMP ASSEMBLY 9400610316 1066921060 1156010351


106692-1060 INJECTION-PUMP ASSEMBLY
Rating:
83
Buy INJECTION-PUMP ASSEMBLY 106692-1060 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 316 9400610316
ZEXEL 106692-1060 1066921060
ISUZU 1156010351 1156010351

Service parts 106692-1060 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106069-1151
3. GOVERNOR 105407-1480
4. SUPPLY PUMP 105237-1331
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105662-0350
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-4891
11. Nozzle and Holder 1-15300-041-2
12. Open Pre:MPa(Kqf/cm2) 22.1{225}
13. NOZZLE-HOLDER 105031-4171
14. NOZZLE 105015-3520
15. NOZZLE SET

Include in #1:

106692-1060 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 316 9400610316
ZEXEL 106692-1060 1066921060
ISUZU 1156010351 1156010351


Zexel num
Bosch num
Firm num
Name
106692-1060 
9 400 610 316 
1156010351  ISUZU
INJECTION-PUMP ASSEMBLY
E120 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   6.9
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   95.2 93.2 97.2
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.2+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   14.1 10.9 17.3
Max. variation between cylinders %   0 -13 13
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 106692-1060
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Idle sub spring setting: L1.
----------
K=16 L1=6-0.3mm
----------

Speed control lever angle

Test data 106692-1060
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=7deg+-5deg b=24deg+-5deg

Stop lever angle

Test data 106692-1060
N:Pump normal S:Stop the pump.
----------

----------
a=3deg+-5deg b=46deg+-5deg




Have questions with 106692-1060?





Group cross 106692-1060 ZEXEL

Isuzu 

106692-1000  

106692-1021 
 
1156001312 
INJECTION-PUMP ASSEMBLY
E120
106692-1021  
 
1156007390 
INJECTION-PUMP ASSEMBLY
E120
106692-1031  
 
1156007410 
INJECTION-PUMP ASSEMBLY
E120
106692-1040  
 
1156009311 
INJECTION-PUMP ASSEMBLY
E120
106692-1050  
9 400 610 254 
1156009361 
INJECTION-PUMP ASSEMBLY
E120
106692-1060  
9 400 610 316 
1156010351 
INJECTION-PUMP ASSEMBLY
E120
106692-1070  
 
1156010610 
INJECTION-PUMP ASSEMBLY
E120
106692-1080  
9 400 617 804 
1156010591 
INJECTION-PUMP ASSEMBLY
6RB1-T
106692-1090  
 
1156011720 
INJECTION-PUMP ASSEMBLY
E120
Back to top