Fuel injectors
  1. Home
  2. injection
  3. #1066921000

106692-1000 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066921000 1156001312


106692-1000 INJECTION-PUMP ASSEMBLY
Rating:
78
Buy INJECTION-PUMP ASSEMBLY 106692-1000 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106692-1000 1066921000
ISUZU 1156001312 1156001312

Cross reference number

ZEXEL 106692-1000 1066921000
ISUZU 1156001312 1156001312


Zexel num
Bosch num
Firm num
Name
106692-1000 
106692-1021 
 
1156001312  ISUZU
INJECTION-PUMP ASSEMBLY
E120 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   7.1
Pump speed r/min   875 875 875
Average injection quantity mm3/st.   101.8 98 105.6
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   7.1
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   101.8 98 105.6
Max. variation between cylinders %   0 -3 3
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   5.5+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   25 21.8 28.2
Max. variation between cylinders %   0 -13 13
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 106692-1000
N:Pump speed R:Rack position (mm) (1)Target notch: K
----------
K=10
----------

Speed control lever angle

Test data 106692-1000
F:Full speed I:Idle S:Stop
----------

----------
a=5deg+-5deg b=20deg+-5deg c=32deg+-3deg




Have questions with 106692-1000?





Group cross 106692-1000 ZEXEL

Isuzu 

106692-1000  

106692-1021 
 
1156001312 
INJECTION-PUMP ASSEMBLY
E120
106692-1021  
 
1156007390 
INJECTION-PUMP ASSEMBLY
E120
106692-1031  
 
1156007410 
INJECTION-PUMP ASSEMBLY
E120
106692-1040  
 
1156009311 
INJECTION-PUMP ASSEMBLY
E120
106692-1050  
9 400 610 254 
1156009361 
INJECTION-PUMP ASSEMBLY
E120
106692-1060  
9 400 610 316 
1156010351 
INJECTION-PUMP ASSEMBLY
E120
106692-1070  
 
1156010610 
INJECTION-PUMP ASSEMBLY
E120
106692-1080  
9 400 617 804 
1156010591 
INJECTION-PUMP ASSEMBLY
6RB1-T
106692-1090  
 
1156011720 
INJECTION-PUMP ASSEMBLY
E120
Back to top