106691-0442 ZEXEL 9 400 612 926 BOSCH INJECTION-PUMP ASSEMBLY 9400612926 1066910442 1671396868

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106691-0442 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 926 9400612926

ZEXEL 106691-0442 1066910442

NISSAN-DIESEL 1671396868 1671396868

Service parts 106691-0442 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106069-5910

3. GOVERNOR 105487-5210

4. SUPPLY PUMP 105227-6010

5. AUTOM. ADVANCE MECHANIS 105681-2110

6. COUPLING PLATE 105662-1200

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-7950

11. Nozzle and Holder 16600-96572

12. Open Pre:MPa(Kqf/cm2) 14.7{150}/19.6{200}

13. NOZZLE-HOLDER 105030-4210

14. NOZZLE 105015-8420

15. NOZZLE SET

Include in #1:

106691-0442 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 612 926 9400612926

ZEXEL 106691-0442 1066910442

NISSAN-DIESEL 1671396868 1671396868

Zexel num

Bosch num

Firm num

Name

106691-0442

9 400 612 926

1671396868 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
PF6H K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.65 3.6 3.7

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 7.6

Pump speed r/min 650 650 650

Average injection quantity mm3/st. 123.8 121.8 125.8

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point C

Rack position 4.9+-0.5

Pump speed r/min 225 225 225

Average injection quantity mm3/st. 8 6.7 9.3

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Injection quantity adjustment_03

Adjusting point E

Rack position R1(9.4)+ -0.1

Pump speed r/min 40 40 40

Average injection quantity mm3/st. 91 91 101

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min 950

Remarks
Measure the actual advance angle.

Timer adjustment_02

Pump speed r/min 1050

Advance angle deg. 5 4.5 5.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Tolerance for racks not indicated: +-0.05mm. (4)Rack limit using stop lever: RA (5)Excess fuel setting for starting: SXL (6)Damper spring setting
----------
RT=1 TH=1.8mm RA=R1(9.4)+-0.1mm SXL=8.4+-0.1mm
----------

Speed control lever angle

F:Full speed
----------

----------
a=16deg+-5deg

0000000901

F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=15deg+-5deg b=24deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)R = aa (2)Drive side (3)Rack position bb
----------
aa=50mm bb=R1(9.4)+-0.1mm
----------
a=22deg+-5deg b=24deg+-5deg