106691-0191 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066910191

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106691-0191 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106691-0191 1066910191

Service parts 106691-0191 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106069-5780

3. GOVERNOR 105487-1992

4. SUPPLY PUMP 105217-6010

5. AUTOM. ADVANCE MECHANIS 105681-4051

6. COUPLING PLATE 105662-0751

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-6170

11. Nozzle and Holder 16600-96511

12. Open Pre:MPa(Kqf/cm2) 22.6{230}

13. NOZZLE-HOLDER 105031-4370

14. NOZZLE 105015-5800

15. NOZZLE SET

Include in #1:

106691-0191 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106691-0191 1066910191

Zexel num

Bosch num

Firm num

Name

106691-0191

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.65 3.6 3.7

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 11.1

Pump speed r/min 650 650 650

Average injection quantity mm3/st. 162 160 164

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Boost pressure kPa 30.7 30.7

Boost pressure mmHg 230 230

Injection quantity adjustment_02

Adjusting point B

Rack position 10.8+-0. 5

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 162.2 159.2 165.2

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Boost pressure kPa 30.7 30.7

Boost pressure mmHg 230 230

Injection quantity adjustment_03

Adjusting point C

Rack position 6+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 13.2 12.2 14.2

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_04

Adjusting point D

Rack position R1(9.5)

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 112 109 115

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_05

Adjusting point F

Rack position R1+0.5++

Pump speed r/min 40 40 40

Average injection quantity mm3/st. 110 110

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 300 300 300

Rack position R1(9.5)

Boost pressure kPa 6.7 4 6.7

Boost pressure mmHg 50 30 50

Boost compensator adjustment_02

Pump speed r/min 300 300 300

Rack position 11.7

Boost pressure kPa 24

Boost pressure mmHg 180

Timer adjustment

Pump speed r/min 200+100

Advance angle deg. 1.6 1.1 2.1

Remarks
Start

Timer adjustment_02

Pump speed r/min 500-150

Advance angle deg. 0 0 0

Timer adjustment_03

Pump speed r/min 910+80

Advance angle deg. 0 0 0

Timer adjustment_04

Pump speed r/min (1050)

Advance angle deg. 2 1.5 2.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Damper spring setting: DL (4)Boost compensator stroke: BCL (5)Rack limit using the stop lever: R1 (6)Variable speed specification. (7)Main spring setting (8)Set idle sub-spring
----------
RT=1 TH=2.2mm DL=5-0.2mm BCL=(2.2)mm R1=11.7+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=10deg+-5deg b=26deg+-5deg

0000000901

F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=20.5deg+-5deg b=35deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Rack position = aa, speed = bb. (2)Rack position = cc
----------
aa=1+0.5mm bb=0r/min cc=11.7mm
----------
a=28deg+-5deg b=30deg+-3deg