106691-0150 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066910150


106691-0150 INJECTION-PUMP ASSEMBLY
Rating:
84
Buy INJECTION-PUMP ASSEMBLY 106691-0150 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106691-0150 1066910150

Cross reference number

ZEXEL 106691-0150 1066910150


Zexel num
Bosch num
Firm num
Name
106691-0150 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.65 3.6 3.7
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   160.8 158.8 162.8
Max. variation between cylinders %   0 -4 4
Basic   *
Fixing the lever   *
Boost pressure kPa   30.7 30.7
Boost pressure mmHg   230 230
Injection quantity adjustment_02
Adjusting point   B
Rack position   10.7
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   161 158 164
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Boost pressure kPa   30.7 30.7
Boost pressure mmHg   230 230
Injection quantity adjustment_03
Adjusting point   C
Rack position   6+-0.5
Pump speed r/min   225 225 225
Average injection quantity mm3/st.   15 14 16
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_04
Adjusting point   D
Rack position   8.7+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   85.5 82.5 88.5
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_05
Adjusting point   E
Rack position   11.7
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   180 178 182
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Boost pressure kPa   30.7 30.7
Boost pressure mmHg   230 230
Boost compensator adjustment
Pump speed r/min   300 300 300
Rack position   (8.7)
Boost pressure kPa   6.7 4 6.7
Boost pressure mmHg   50 30 50
Boost compensator adjustment_02
Pump speed r/min   300 300 300
Rack position   11.7
Boost pressure kPa   24
Boost pressure mmHg   180
Timer adjustment
Pump speed r/min   200+100
Advance angle deg.   1.6 1.1 2.1
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   500-150
Advance angle deg.   0 0 0
Timer adjustment_03
Pump speed r/min   910+80
Advance angle deg.   0 0 0
Timer adjustment_04
Pump speed r/min   (1050)
Advance angle deg.   2 1.5 2.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106691-0150
N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Damper spring setting: DL (4)Boost compensator stroke: BCL (5)Rack limit using stop lever (6)Rack difference between N = N1 and N = N2 (7)Variable speed specification. (8)Main spring setting (9)Set idle sub-spring
----------
RT=1 TH=1.6mm DL=4-0.2mm BCL=(3)mm N1=1100r/min N2=650r/min
----------

Speed control lever angle

Test data 106691-0150
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=10deg+-5deg b=26deg+-5deg

0000000901

Test data 106691-0150
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=32.5deg+-5deg b=31.5deg+-3deg

Stop lever angle

Test data 106691-0150
N:Pump normal S:Stop the pump. (1)Rack position = aa, speed = bb. (2)Rack position = cc
----------
aa=1+0.5mm bb=0r/min cc=11.7mm
----------
a=28deg+-5deg b=30deg+-3deg

Timing setting

Test data 106691-0150
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(30deg)




Have questions with 106691-0150?





Group cross 106691-0150 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1680096509 
INJECTION-PUMP ASSEMBLY
PE6TA
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1679096012 
INJECTION-PUMP ASSEMBLY
PD6T
 
 
INJECTION-PUMP ASSEMBLY
PE6TA
 
 
INJECTION-PUMP ASSEMBLY
PE6TA
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1680096510 
INJECTION-PUMP ASSEMBLY
PE6TA
 
 
INJECTION-PUMP ASSEMBLY
PE6TA
 
 
INJECTION-PUMP ASSEMBLY
PE6TA
106691-0150  
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671396666 
INJECTION-PUMP ASSEMBLY
PE6T
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671396667 
INJECTION-PUMP ASSEMBLY
PE6T
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671396668 
INJECTION-PUMP ASSEMBLY
PE6T
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1671396669 
INJECTION-PUMP ASSEMBLY
PE6T
 
1671396670 
INJECTION-PUMP ASSEMBLY
PE6T
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 617 748 
1671396673 
INJECTION-PUMP ASSEMBLY
PE6T
Back to top