106684-4470 ZEXEL 9 400 617 686 BOSCH INJECTION-PUMP ASSEMBLY 9400617686 1066844470 3266500120

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106684-4470 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 686 9400617686

ZEXEL 106684-4470 1066844470

MITSUBISHI-HEAV 3266500120 3266500120

Service parts 106684-4470 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106068-4070

3. GOVERNOR

4. SUPPLY PUMP 105237-1690

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105664-0670

7. COUPLING PLATE 156643-6420

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-6000

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 29.4{300}

13. NOZZLE-HOLDER 105040-5020

14. NOZZLE 105025-2680

15. NOZZLE SET

Include in #1:

106684-4470 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 686 9400617686

ZEXEL 106684-4470 1066844470

MITSUBISHI-HEAV 3266500120 3266500120

Zexel num

Bosch num

Firm num

Name

106684-4470

9 400 617 686

3266500120 MITSUBISHI-HEAV

INJECTION-PUMP ASSEMBLY
S12A2 K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8130

Bosch type code EFEP215A

Nozzle 105780-0050

Bosch type code DN6TD119NP1T

Nozzle holder 105780-2090

Bosch type code EFEP215

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-4-1000

Overflow valve 131424-3420

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 255 255 255

Tester oil delivery pressure kgf/cm2 2.6 2.6 2.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3 2.95 3.05

Beginning of injection position
Opposite to the driving side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 10.9

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 350 341 359

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the rack *

Rack limit *

Injection quantity adjustment_02

Adjusting point -

Rack position 6.1+-0.5

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 24.5 21.5 27.5

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Test data Ex:

0000001501 RACK SENSOR

Nut A (B) Nut (C) Injection quantity decrease direction 1. Driven side rack limit mechanism adjustment procedure (for row R) (1)Set the rack limit at adjusting point A using the two nuts (A) and (B) on the driven side end of the rack.
----------

----------