106684-4480 ZEXEL 9 400 617 687 BOSCH INJECTION-PUMP ASSEMBLY 9400617687 1066844480 3266500130


106684-4480 INJECTION-PUMP ASSEMBLY
Rating:
79
Buy INJECTION-PUMP ASSEMBLY 106684-4480 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 687 9400617687
ZEXEL 106684-4480 1066844480
MITSUBISHI-HEAV 3266500130 3266500130

Service parts 106684-4480 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106068-4080
3. GOVERNOR
4. SUPPLY PUMP 105237-1690
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105664-0670
7. COUPLING PLATE 156643-6420
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-6000
11. Nozzle and Holder 35A6101030
12. Open Pre:MPa(Kqf/cm2) 29.4{300}
13. NOZZLE-HOLDER 105040-5020
14. NOZZLE 105025-2680
15. NOZZLE SET

Include in #1:

106684-4480 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 687 9400617687
ZEXEL 106684-4480 1066844480
MITSUBISHI-HEAV 3266500130 3266500130


Zexel num
Bosch num
Firm num
Name
106684-4480 
106684-4481 
9 400 617 687 
3266500130  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S12A2 * K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-4-1000
Overflow valve   131424-3420
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   255 255 255
Tester oil delivery pressure kgf/cm2   2.6 2.6 2.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Opposite to the driving side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.9
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   350 341 359
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Rack limit   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   6.1+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   24.5 21.5 27.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

0000001501 RACK SENSOR

Test data 106684-4480
Plate A (B) Nut (C) Injection quantity increase direction 1. Drive side rack limit mechanism adjustment procedure (for row L) (1)Set the rack limit at adjusting point A using the plate (A) above the drive side rack and the nut (B).
----------

----------

Timing setting

Test data 106684-4480
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(20deg)




Have questions with 106684-4480?





Group cross 106684-4480 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
SAA12V14
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 680 
6215712220 
INJECTION-PUMP ASSEMBLY
SAA12V14
F 019 Z20 198 
6215712221 
INJECTION-PUMP ASSEMBLY
SAA12V14
9 400 612 282 
 
INJECTION-PUMP ASSEMBLY
9 400 612 760 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

 
6215722140 
INJECTION-PUMP ASSEMBLY
SA12V140
9 400 613 237 
6215722141 
INJECTION-PUMP ASSEMBLY
SA12V140
F 019 Z20 199 
6215722142 
INJECTION-PUMP ASSEMBLY
SA12V140
 
6215722143 
INJECTION-PUMP ASSEMBLY
SA12V140E
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 681 
6215722180 
INJECTION-PUMP ASSEMBLY
SA12V140
F 019 Z20 200 
6215722181 
INJECTION-PUMP ASSEMBLY
SA12V140
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 682 
6215722190 
INJECTION-PUMP ASSEMBLY
SA12V140
F 019 Z20 201 
6215722191 
INJECTION-PUMP ASSEMBLY
SA12V140
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 683 
6215722120 
INJECTION-PUMP ASSEMBLY
SA12V140
F 019 Z20 202 
6215722121 
INJECTION-PUMP ASSEMBLY
SA12V140

Mitsubishi-Heav 

9 400 617 684 
35A6501060 
INJECTION-PUMP ASSEMBLY
S6A3
 
35A6501070 
INJECTION-PUMP ASSEMBLY
S6A3
9 400 617 685 
35A6511070 
INJECTION-PUMP ASSEMBLY
S6A3
9 400 617 686 
3266500120 
INJECTION-PUMP ASSEMBLY
S12A2
106684-4480  

106684-4481 
9 400 617 687 
3266500130 
INJECTION-PUMP ASSEMBLY
S12A2
F 01G 09U 092 
 
INJECTION-PUMP ASSEMBLY
S12A2-1

Mitsubishi-Heav 

F 01G 09U 092 
3266510130 
INJECTION-PUMP ASSEMBLY
S12A2-1
9 400 617 688 
3266500320 
INJECTION-PUMP ASSEMBLY
S12A2
F 019 Z10 089 
3266510320 
INJECTION-PUMP ASSEMBLY
S12A2
Back to top